gnuradio-grc-examples
This repository will have all my gnuradio exsamplesRaspberry_Telemetry
This project will have the files for a Cube Sat Telemetry system Using Raspberry Pi Transmitter Boardfl_2k_diplexer_and_amp
fl_2k diplexer and amp +27dbm rf 70cm and 2m with bandpass filtersnoaa_weather
This repository will have all the files of the Automated NOAA weather satellite system.hack_rf_linear_transponder
This repository will have the gnuradio hack rf Linear transpondereshail2
This repository will have all teh Eshail2 (QO-100) Satellite configuration fileshf_noise_master_server
This repository will have the Master Noise monitoring server codeRaspberry_pi_Repeater
This will holed the Scripts and code for the Raspberry Pi Repeaterqo-100-dbv-s2
This Repository will have all my Code to Decode QO-100 Eshail-2 DBV-S2 Satellite TV signalsEcholinkPi
This will holed the source code for the Echo-link Shield board for Raspberry Pi 2IQ_Modulator
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)rtl_geo_heatmap
This repository will have the code of an rf signal strenth mapping tool (using an RTL dongle and a GPS for recordingsvxlink_to_rpitx
This repository will have the code to use rtl_sdr dongle vir reception and rpitx as transmitterBacar_Raspberry_tx
This project is to share the Bacar Raspberry Transmitter 2m Transmitterafricube
africube is repository for a Cubesat transponder hardwareBalloon-Transponder
This repository will have the Software for the Orange PI SDR transponder.rf_noise_antenna
This repository will have all the details for the active antenna board for Rasdpberry PIlime_mini
This repository will have all my Lime mini configurations.hf_noise
This repository will have all the HF Noise monitoring system files.vhf_uhf_diplexer
This is all the files for a VHF /UHF Diplexer 10w maxPiGnuradio
Some of my Raspberry Pi GnuRadio blocksVHFUHFAPRS
This repository is for the VHF or UHF APRS radio boardgnuradio_on_raspberry_pi_3
This repository will have all my instelation files for setting up Gnuradio on Raspberry Pi 3433Mhz_mqtt
This Repository has my rtl_433 control softwareafricube_receiver_board
Africube Satellite receiver boardballoon
This Repository will have the code for Raspberry or Orange Pi for Balloonradio_digi
This repository will have the computer sound card to radio interface.iss_igate
This repository will have all the code for my automated ISS Igate code.raspberry-pi-transponder
This respository will have my expiremental code to build a satellite transponder3D_print_file
This repository will have the #d Print fileshamlib_rtl_server
This Repository will have all the code to controle the rtl_dongle from hamlib.2m-70cm-Diplexer
This project will have the VHF UHF DiplexerAIR
This repository will have all my AI (Artificial intelligence) for SDR RadioUSB_L_Band_TX
This project will contain the USB L band Transmitter detailsnode-red-number-plate-recognition
Thir epository will have my flos for number plate recognitionRadioInterface
This is a Amateur Radio interface between radio and Mobile, Tablet, Laptop or Computer.AMSATSA_Transponder
This repository is to hold the AMSATSA Cubesat source code.kicad_config
This repository will have my kicad custome configuration detailsCNC-Plasma-Cutter
CNC Plasma Cutter designafricube_ground_station
This repository will have all the code to enable africube ground station enabeling igate and message transmition.arduino_modem
This repository will have the arduino AFSK / APRS modem board.70cm_turnstile_antenna
This Repository will have all the design artifacts for the 70cm Turnstile Antenna.qo-100_pi
This Repository will have my Raspberry PI QO-100 Satellite ground Station filespython_audio
This repository will have my python audio codedsolar_systems
This repository will have all the Solar sytems.L_Band_Transmitter
This project will be sharing the L Band Transmitter for a possible transponder.rf_noise_remote
This is the code for the new V3 rf noise systemgnuradio_igate
This repository will have the code of a gnuradio igate resever with direwolfsdt_mux
This will include the code for splitting the rtl_tcp iq stream to mutipal SDR demodulatorsqo100tx_client
This a python client contolling the Qo-100 gnuradio transmittergenerator_arduino_controle
This code is a web based Arduino controller for stopping and starting an Petrol Generatorafricube_software
This repository will have the Transponder and Telemetry software applications.Love Open Source and this site? Check out how you can help us