There are no reviews yet. Be the first to send feedback to the community and the maintainers!
gnuradio-grc-examples
This repository will have all my gnuradio exsamplesRaspberry_Telemetry
This project will have the files for a Cube Sat Telemetry system Using Raspberry Pi Transmitter Boardfl_2k_diplexer_and_amp
fl_2k diplexer and amp +27dbm rf 70cm and 2m with bandpass filtersnoaa_weather
This repository will have all the files of the Automated NOAA weather satellite system.hack_rf_linear_transponder
This repository will have the gnuradio hack rf Linear transpondereshail2
This repository will have all teh Eshail2 (QO-100) Satellite configuration fileshf_noise_master_server
This repository will have the Master Noise monitoring server codeRaspberry_pi_Repeater
This will holed the Scripts and code for the Raspberry Pi Repeaterqo-100-dbv-s2
This Repository will have all my Code to Decode QO-100 Eshail-2 DBV-S2 Satellite TV signalsEcholinkPi
This will holed the source code for the Echo-link Shield board for Raspberry Pi 2IQ_Modulator
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)rtl_geo_heatmap
This repository will have the code of an rf signal strenth mapping tool (using an RTL dongle and a GPS for recordingsvxlink_to_rpitx
This repository will have the code to use rtl_sdr dongle vir reception and rpitx as transmitterBacar_Raspberry_tx
This project is to share the Bacar Raspberry Transmitter 2m Transmitterafricube
africube is repository for a Cubesat transponder hardwareBalloon-Transponder
This repository will have the Software for the Orange PI SDR transponder.rf_noise_antenna
This repository will have all the details for the active antenna board for Rasdpberry PIlime_mini
This repository will have all my Lime mini configurations.hf_noise
This repository will have all the HF Noise monitoring system files.vhf_uhf_diplexer
This is all the files for a VHF /UHF Diplexer 10w maxPiGnuradio
Some of my Raspberry Pi GnuRadio blocksVHFUHFAPRS
This repository is for the VHF or UHF APRS radio boardgnuradio_on_raspberry_pi_3
This repository will have all my instelation files for setting up Gnuradio on Raspberry Pi 3433Mhz_mqtt
This Repository has my rtl_433 control softwareafricube_receiver_board
Africube Satellite receiver boardballoon
This Repository will have the code for Raspberry or Orange Pi for Balloonradio_digi
This repository will have the computer sound card to radio interface.iss_igate
This repository will have all the code for my automated ISS Igate code.raspberry-pi-transponder
This respository will have my expiremental code to build a satellite transponder3D_print_file
This repository will have the #d Print fileshamlib_rtl_server
This Repository will have all the code to controle the rtl_dongle from hamlib.2m-70cm-Diplexer
This project will have the VHF UHF DiplexerAIR
This repository will have all my AI (Artificial intelligence) for SDR RadioUSB_L_Band_TX
This project will contain the USB L band Transmitter detailsnode-red-number-plate-recognition
Thir epository will have my flos for number plate recognitionRadioInterface
This is a Amateur Radio interface between radio and Mobile, Tablet, Laptop or Computer.AMSATSA_Transponder
This repository is to hold the AMSATSA Cubesat source code.kicad_config
This repository will have my kicad custome configuration detailsCNC-Plasma-Cutter
CNC Plasma Cutter designafricube_ground_station
This repository will have all the code to enable africube ground station enabeling igate and message transmition.arduino_modem
This repository will have the arduino AFSK / APRS modem board.70cm_turnstile_antenna
This Repository will have all the design artifacts for the 70cm Turnstile Antenna.python_audio
This repository will have my python audio codedsolar_systems
This repository will have all the Solar sytems.L_Band_Transmitter
This project will be sharing the L Band Transmitter for a possible transponder.rf_noise_remote
This is the code for the new V3 rf noise systemgnuradio_igate
This repository will have the code of a gnuradio igate resever with direwolfsdt_mux
This will include the code for splitting the rtl_tcp iq stream to mutipal SDR demodulatorsqo100tx_client
This a python client contolling the Qo-100 gnuradio transmittergenerator_arduino_controle
This code is a web based Arduino controller for stopping and starting an Petrol Generatorafricube_software
This repository will have the Transponder and Telemetry software applications.NBFi_AX5043_RPi
NBFi stack for Raspberry Pigr-frontends
GNUradio frontends that stream from different hardware to UDPPiRelayButtons
Python script to display radio buttons and activate relay combinations (via GPIOs)PiSSTVpp
CLI SSTV generator programLove Open Source and this site? Check out how you can help us