There are no reviews yet. Be the first to send feedback to the community and the maintainers!
StanfordQuadruped
Pupper
Build instructions and code documentation for the Stanford Pupper project.Pupper-Raspi-PDB
PS4Joystick
Collection of methods of using a PS4 controller with UDPCommsDJIC610Controller
A Teensy 4.0 Library (Arduino) to control the DJI C610 motor controllers. These controllers pair with the M2006 brushless gear motor to make a moderately transparent, high torque-density actuator.fusion360EquationCurve
PupperKeyboardController
Pygame-based keyboard controller for Stanford PupperPupperCommand
pupperv3-independent-study
Course materialsUDPComms
This is a simple library to enable communication between different processes (potentially on different machines) over a network using UDP. It's goals a simplicity and easy of understandingrover_drive_controller
An experimental CANopen-based ROS motor controller for the Stanford Mars RoverRoverCam
Streams camera data from the rover over the UDP networkstanfordroboticsclub.github.io
Stanford Student Robotics WebsiteRoverODrive
Uses an RPi as a bridge between udp messages and serial sent to an oDrivePupper-V2-Interface
uSlam
RepositoryGuide
Contains a description of some of our modulesLTC2440ArduinoLibrary
Teensy/Arduino library for reading data from the LTC2440 24-bit high resolution ADCQuadrupedController
A library to control 12dof, position-based quadruped robots.PupperSimulatorInterface
boat-autonomy
Code for autonomy for boat projectAttitudeEstimators
RemoteVPN
Allows to connect to the robot from anywhere in the worldCart-Pole-Simulation
Pupper-pdb
Pupper power distribution boardPupperIMU
arm-blender
Use Blender to control a robotic armIntroWorkshops
rover_viz
A collection of packages to read from the sensor board and display the dataLidarUDP
Publishes UDP packets with data from an RPLidarRoverArm
minislam
Particle filter based slam for teaching purposesrover_arm_controller
A repository for managing arm URDFs and code for arm manipulationRoverAutonomous
Makes Rover smartSwarm
DoggoCommand
karel-pupper-api
UDPComms-Arduino
RoverAruco
RoverGPS
Publishes the rover's GPS location to the UDP networkindependent-study-lab2
clover_auto
Autonomous code written for URC 2018 in literally one night by Stanford RoboticsDynamixelPupper
RoverCommand
Package used to send commands to the RoverRoverVision
Visual perception tasks on the rover.RoverPCB
Collection of KiCad PCB projects for the roverLove Open Source and this site? Check out how you can help us