wendlers/xzrem

Stars
1
Language
Java
License
GNU General Publi...
Created over 12 years ago
Updated over 12 years ago

wendlers/xzrem

wendlers

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Example of How to Control Digital Outputs of Remote XBee using Java and XBee API

mpfshell

A simple shell based file explorer for ESP8266 Micropython based devices ⛺

micropython-mfrc522

(Micro)Python class to access the MFRC522 RFID reader

libemb

"libemb" is a collection of libraries which try to make things needed in many STM32 (ARM-Cortex-M3) or MSP430 (MSP430G2553) based projects more convenient. It includes an API for the Nordic nRF24l01+ modules.

rpi-kmod-samples

Set of example kernel-modules for the Raspberry Pi (includes basic module sample as well as samples for GPIOs, GPIO-interrupts)

ediplug-py

Simple Python class to access a "EDIMAX Smart Plug Switch SP-1101W"

msp430-harduart

Hardware UART example for MSP430G2553 on TI Launchpad using mps430-gcc on Linux

stm32-pwm-servo-sample

Sample showing the usage of timers for PWM generation on the STM32 with libopencm3

pyscmpd

Python based sound-cloud music server talking MPD protocol.

msp430-softuart

Software UART example for MSP430 using mps430-gcc on Linux

msp430-spi-nrfreg

Example on how to read registers of the Nordic nRF24l01+ radio through SPI on USCI_B of MSP430G2553

msp430-i2cslave

MSP430 I2C slave example (for MSP430G2553 on Launchpad) including master example (e.g. for TP-Link MR3020)

stm32-rob01

Firmware for STM32 based autonomous robot “rob01″

lattice-logic-sniffer

Simple 8 port logic sniffer written in Verilog for the Lattice MachXO2 Breakout Board.

atom-microbit-micropython

Microbit Micropython support package for Atom editor

ywasp

YWasp is a firmware for STM32 ARM-Cortex-M3 microcontrollers for "arifaying" a serial line over an Nordic nRF24l01+ module.

msp430-pwm-servo-sample

This example shows how to use TIMER_A0+A1 PWM with a MSP430G2xx3 MCU. It controls two servos on P1.6

rcswitch-kmod

Linux Kernel Module to control 434Mhz based RC switches through sysfs.

install-propeller-toolchain

Simple shell script to install Parallax-Propeller toolchain, including the BST tools and the Propeller GCC.

pyesp8266

Python API to the ESP8266 WiFo to serial module.

msp430-standalone-sample

Running MSP430G2xxx stand alone (without Lauchpad), use Launchpad for in circuit programming

usherpa-firmware

uSherpa is a micro-controller firmware (currently for the MSP430G2553) which helps in quickly adding a micro-controller to a more powerful embedded system (e.g. the MIPS based Carambola or the ARM based beaglebone).

scratch-pynetsense

Python library provides a simple to use client implementation for implementing scratch networking sensors.

atom-stlink

Flash your STM32 / stlink V2 device from Atom with stlink

nano-pixel-client-electron

An electron applicatoin to access a 8x8 neopixel matrix via BLE as exposed by nano-pixel-firmware

carambot

Simple Python script for Carambola SoC to drive a 4-wheel robot remotely

rcswitch-fpga

RC Switch Send - Verilog Module to Operate 434MHz RC Switches

tinr2d2

Simple tin can based, R2D2 like robot with 3D printed parts, using a Parallax Propeller

usherpa-pysherpa

This library provides a Python binding to a microcontroller (e.g. the MSP430G2553) running the uSherpa firmware.

srf05modweb

This project provides a kernel module and a web service to access the SRF05 ultra sonic range finder from a Linux based device (e.g. TP-Link MR3020).

msp430-ebunny

This is just a quick little Easter hack. This firmware for the MSP430G2231 makes two glass Easter bunnies glow through a PWM.