wendlers/carambot

Stars
1
Language
Python
License
GNU General Publi...
Created over 12 years ago
Updated over 11 years ago

wendlers/carambot

wendlers

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Simple Python script for Carambola SoC to drive a 4-wheel robot remotely

mpfshell

A simple shell based file explorer for ESP8266 Micropython based devices ⛺

micropython-mfrc522

(Micro)Python class to access the MFRC522 RFID reader

libemb

"libemb" is a collection of libraries which try to make things needed in many STM32 (ARM-Cortex-M3) or MSP430 (MSP430G2553) based projects more convenient. It includes an API for the Nordic nRF24l01+ modules.

rpi-kmod-samples

Set of example kernel-modules for the Raspberry Pi (includes basic module sample as well as samples for GPIOs, GPIO-interrupts)

ediplug-py

Simple Python class to access a "EDIMAX Smart Plug Switch SP-1101W"

msp430-harduart

Hardware UART example for MSP430G2553 on TI Launchpad using mps430-gcc on Linux

stm32-pwm-servo-sample

Sample showing the usage of timers for PWM generation on the STM32 with libopencm3

pyscmpd

Python based sound-cloud music server talking MPD protocol.

msp430-softuart

Software UART example for MSP430 using mps430-gcc on Linux

msp430-spi-nrfreg

Example on how to read registers of the Nordic nRF24l01+ radio through SPI on USCI_B of MSP430G2553

msp430-i2cslave

MSP430 I2C slave example (for MSP430G2553 on Launchpad) including master example (e.g. for TP-Link MR3020)

stm32-rob01

Firmware for STM32 based autonomous robot “rob01″

lattice-logic-sniffer

Simple 8 port logic sniffer written in Verilog for the Lattice MachXO2 Breakout Board.

atom-microbit-micropython

Microbit Micropython support package for Atom editor

ywasp

YWasp is a firmware for STM32 ARM-Cortex-M3 microcontrollers for "arifaying" a serial line over an Nordic nRF24l01+ module.

msp430-pwm-servo-sample

This example shows how to use TIMER_A0+A1 PWM with a MSP430G2xx3 MCU. It controls two servos on P1.6

rcswitch-kmod

Linux Kernel Module to control 434Mhz based RC switches through sysfs.

install-propeller-toolchain

Simple shell script to install Parallax-Propeller toolchain, including the BST tools and the Propeller GCC.

pyesp8266

Python API to the ESP8266 WiFo to serial module.

msp430-standalone-sample

Running MSP430G2xxx stand alone (without Lauchpad), use Launchpad for in circuit programming

usherpa-firmware

uSherpa is a micro-controller firmware (currently for the MSP430G2553) which helps in quickly adding a micro-controller to a more powerful embedded system (e.g. the MIPS based Carambola or the ARM based beaglebone).

scratch-pynetsense

Python library provides a simple to use client implementation for implementing scratch networking sensors.

atom-stlink

Flash your STM32 / stlink V2 device from Atom with stlink

nano-pixel-client-electron

An electron applicatoin to access a 8x8 neopixel matrix via BLE as exposed by nano-pixel-firmware

rcswitch-fpga

RC Switch Send - Verilog Module to Operate 434MHz RC Switches

tinr2d2

Simple tin can based, R2D2 like robot with 3D printed parts, using a Parallax Propeller

usherpa-pysherpa

This library provides a Python binding to a microcontroller (e.g. the MSP430G2553) running the uSherpa firmware.

srf05modweb

This project provides a kernel module and a web service to access the SRF05 ultra sonic range finder from a Linux based device (e.g. TP-Link MR3020).

msp430-ebunny

This is just a quick little Easter hack. This firmware for the MSP430G2231 makes two glass Easter bunnies glow through a PWM.

xzrem

Example of How to Control Digital Outputs of Remote XBee using Java and XBee API