Discover watterott/BME680-Breakout Open Source project

Stars
8
Rank 2,099,232 (Top 42 %)
Language
Created about 7 years ago
Updated over 4 years ago

watterott

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Breakout with BME680 Air Quality, Humidity, Pressure and Temperature Sensor from Bosch Sensortec

SilentStepStick

Stepper Motor Driver based on a Trinamic TMC2100 / TMC2130 / TMC2208 / TMC2209 / TMC5160.

JavaScript

384

Arduino-Libs

Arduino Libs & Examples: ADS1147, ADS7846, DAC8760, DS1307, RV8523, MCP2515, WS2812, S65-Display, MI0283QT-2/-9/-11, HX8347D, ILI9341, SSD1331

C++

167

RPi-Display

2.8" TFT-Display with Touchpanel for all Raspberry Pi Models

Shell

160

ATmega328PB-Testing

Atmel/Microchip ATmega328PB support for Arduino IDE

WebRadio

Internet Radio based on an ARM Cortex-M3 microcontroller and VLSI VS1053 audio codec

HDMI-Adapter

Universal HDMI/DVI Displays with Touch Panel for Raspberry Pi, BeagleBone, ODROID, UDOO...

C++

Wattuino

Arduino compatible Boards and Modules based on Microchip ARM and AVR Microcontroller

ESP-WROOM-Breakout

Breakouts for ESP8266 and ESP32 WiFi/WLAN + Bluetooth modules from Espressif (ESP-WROOM-02, ESP-WROOM-32)

SAM-BAR

SAM Boot Assistant Reloaded - Combo USB CDC+MSD Bootloader for Atmel/Microchip SAMD21 microcontroller

Eagle-Libs

Part Libraries for CadSoft/Autodesk Eagle

CANdiy-Shield

CAN-Bus Shield for Arduino based on Microchip MCP2515 or MCP2517FD CAN Controller

CO2-Ampel

CO2-Ampel / CO2-Traffic-Light to measure and show the carbon dioxide concentration in a room, based on Sensirion SCD30/SCD4x sensor and Microchip SAMD21 microcontroller

LGT8F328P-Testing

LogicGreen LGT8F328P Microcontroller (AVR Mega328 compatible)

MI0283QT-Adapter

Adapter Board with 2.8" TFT-Display and Touchpanel (Multi-Inno MI0283QT)

FabScan-Shield

Shield for Arduino to drive Stepper and Servo Motors

C++

RPi-DPI-HAT

Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi

RPi-UNO-HAT

Uno HAT (Hardware Attached on Top) for Raspberry Pi

Python

BME280-Breakout

Breakout with BME280 Humidity, Pressure and Temperature Sensor from Bosch Sensortec

RedFly-Shield

WiFi/WLAN Shield for Arduino with Redpine Signals RS9110-N-11-22

RPi-ShieldBridge

Raspberry Pi to Uno Shield Bridge

Python

USB-Isolator

USB port isolator based on an Analog Devices ADuM3160

WS2812-Ring

Ring with WS2812 intelligent RGB-LED

mSD-Shield

Shield for Arduino with microSD socket, RTC with Battery and Display

S65-Shield

Shield for Arduino with Display, Rotary Encoder and microSD socket

RPi-Proto-HAT

Prototyping Area HAT (Hardware Attached on Top) for Raspberry Pi

FTDI-Breakout

USB to Serial/UART Adapter with FTDI Chipset (FT232R, FT231X)

RPi-FabScan-HAT

FabScan HAT (Hardware Attached on Top) for Raspberry Pi

Surplus-Parts

Surplus Parts / Excess-Stock / Overstock / Überbestand von Bauteilen

vCard

Business Card with Atmel/Microchip ATmega328 and Arduino compatible Bootloader

C++

BlinkenClock

Wall-Clock based on a RGB-LED Stripe

C++

WS2812-Breakout

Breakouts with WS2812 intelligent RGB-LED

Level-Shifter

Logic Level Shifter / Converter

senseBox-MCU

Sensor Board based on a Microchip SAMD21 ARM Cortex-M0+

Robo-Badge

Badge based on an Microchip ATtiny841 Microcontroller with Micronucleus USB Bootloader

BMP280-Breakout

Breakout with BMP280 Pressure and Temperature Sensor from Bosch Sensortec

CP2102N-Breakout

USB to Serial/UART Adapter with Silicon Labs Chipset (CP2102N)

CAM-M8Q-Breakout

Breakout with u-blox CAM-M8Q Multi GNSS Module (GPS, QZSS, GLONASS, BeiDou, Galileo)

Drawdio

Electronic pencil that makes music while you draw

StarterKit-Microcontroller

Starter-Kit for Microcontroller Boards

LCD-BackPack

Backpack to control HD44780 compatible displays over UART or I2C

RPi-WS2812-HAT

WS2812B intelligent RGB-LED Matrix HAT (Hardware Attached on Top) for Raspberry Pi

C++

StarterKit-Robotics

Starter-Kit for Robotics with Microcontroller Board

C++

senseBox-Shield

Shield for Arduino to connect Sensors

RPi-Camera-RingLicht

Camera light for Raspberry Pi camera based on WS2812 RGB-LEDs

TSL45315-Breakout

Breakout with AMS TSL45315 Light Sensor (visible)

C++

VEML6070-Breakout

Breakout with Vishay VEML6070 Light Sensor (UV)

C++

NB-IoT-Bee

XBee footprint compatible NB-IoT Module

Breadboard-Power-Supply

Power Supply for Breadboards

GLCD-Shield

Shield for Arduino with Display and Rotary Encoder / Navigation-Switch

ATWINC1500-Breakout

WiFi/WLAN Breakout with Atmel/Microchip ATWINC1500B and ATECC508A

mSD-Bee

XBee footprint compatible microSD Module

ACS72X-Breakout

Breakout with AllegroMicro ACS724/ACS725 Hall-Effect Current Sensor

senseBox-SolarCharger

SolarCharger extension for the senseBox MCU

C++

BlueFly-Shield

WiFi/WLAN Shield for Arduino with Atmel/Microchip ATWINC1500-MR210PB Module

BMP388-Breakout

Breakout with BMP388 Pressure and Temperature Sensor from Bosch Sensortec

FATSC

SD/USB coprocessor to connect USB memory drives or SD cards to a microcontroller

C++

Motor-Shield

Shield for Arduino to drive DC-Motors, Solenoids or Relays

Mic-Breakout

Breakout with pre-amplified Microphone based on a Maxim MAX4465

TOS100-Shield

Stepper Motor Driver Shield for Arduino based on a Trinamic TMC260

RPi-Breadboard-Adapter

Raspberry Pi to Breadboard Adapter

RGB-LED-Kits

RGB-LED Cube and RGB-LED Star

LoRa-Bee

XBee footprint compatible LoRa Module with HopeRF RFM9XW

HDC100X-Breakout

Breakout with TI HDC1000 or HDC1008 Humidity and Temperature Sensor

Arduino-Boards

Watterott Boards Package for Arduino IDE

Eitech-Robotics

Robotics Board based on an Microchip SAMW25 Module (SAMD21 ARM Cortex-M0+ and WINC1500 WiFi/WLAN SoC)

RTC-Breakout

Breakout with Micro Crystal RV-8523-C3 RTC (Real-Time-Clock) and CR1225 Battery

Python

watterott/BME680-Breakout

watterott

Reviews

Repository Details

More Repositories