Discover watterott/StarterKit-Robotics Open Source project

Stars
3
Rank 3,963,521 (Top 79 %)
Language
C++
Created about 10 years ago
Updated about 5 years ago

watterott

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Starter-Kit for Robotics with Microcontroller Board

SilentStepStick

Stepper Motor Driver based on a Trinamic TMC2100 / TMC2130 / TMC2208 / TMC2209 / TMC5160.

JavaScript

384

Arduino-Libs

Arduino Libs & Examples: ADS1147, ADS7846, DAC8760, DS1307, RV8523, MCP2515, WS2812, S65-Display, MI0283QT-2/-9/-11, HX8347D, ILI9341, SSD1331

C++

167

RPi-Display

2.8" TFT-Display with Touchpanel for all Raspberry Pi Models

Shell

160

ATmega328PB-Testing

Atmel/Microchip ATmega328PB support for Arduino IDE

WebRadio

Internet Radio based on an ARM Cortex-M3 microcontroller and VLSI VS1053 audio codec

HDMI-Adapter

Universal HDMI/DVI Displays with Touch Panel for Raspberry Pi, BeagleBone, ODROID, UDOO...

C++

Wattuino

Arduino compatible Boards and Modules based on Microchip ARM and AVR Microcontroller

ESP-WROOM-Breakout

Breakouts for ESP8266 and ESP32 WiFi/WLAN + Bluetooth modules from Espressif (ESP-WROOM-02, ESP-WROOM-32)

SAM-BAR

SAM Boot Assistant Reloaded - Combo USB CDC+MSD Bootloader for Atmel/Microchip SAMD21 microcontroller

Eagle-Libs

Part Libraries for CadSoft/Autodesk Eagle

CANdiy-Shield

CAN-Bus Shield for Arduino based on Microchip MCP2515 or MCP2517FD CAN Controller

CO2-Ampel

CO2-Ampel / CO2-Traffic-Light to measure and show the carbon dioxide concentration in a room, based on Sensirion SCD30/SCD4x sensor and Microchip SAMD21 microcontroller

LGT8F328P-Testing

LogicGreen LGT8F328P Microcontroller (AVR Mega328 compatible)

MI0283QT-Adapter

Adapter Board with 2.8" TFT-Display and Touchpanel (Multi-Inno MI0283QT)

FabScan-Shield

Shield for Arduino to drive Stepper and Servo Motors

C++

RPi-DPI-HAT

Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi

RPi-UNO-HAT

Uno HAT (Hardware Attached on Top) for Raspberry Pi

Python

BME280-Breakout

Breakout with BME280 Humidity, Pressure and Temperature Sensor from Bosch Sensortec

RedFly-Shield

WiFi/WLAN Shield for Arduino with Redpine Signals RS9110-N-11-22

RPi-ShieldBridge

Raspberry Pi to Uno Shield Bridge

Python

USB-Isolator

USB port isolator based on an Analog Devices ADuM3160

WS2812-Ring

Ring with WS2812 intelligent RGB-LED

mSD-Shield

Shield for Arduino with microSD socket, RTC with Battery and Display

S65-Shield

Shield for Arduino with Display, Rotary Encoder and microSD socket

RPi-Proto-HAT

Prototyping Area HAT (Hardware Attached on Top) for Raspberry Pi

FTDI-Breakout

USB to Serial/UART Adapter with FTDI Chipset (FT232R, FT231X)

RPi-FabScan-HAT

FabScan HAT (Hardware Attached on Top) for Raspberry Pi

BME680-Breakout

Breakout with BME680 Air Quality, Humidity, Pressure and Temperature Sensor from Bosch Sensortec

Surplus-Parts

Surplus Parts / Excess-Stock / Overstock / Überbestand von Bauteilen

vCard

Business Card with Atmel/Microchip ATmega328 and Arduino compatible Bootloader

C++

BlinkenClock

Wall-Clock based on a RGB-LED Stripe

C++

WS2812-Breakout

Breakouts with WS2812 intelligent RGB-LED

Level-Shifter

Logic Level Shifter / Converter

senseBox-MCU

Sensor Board based on a Microchip SAMD21 ARM Cortex-M0+

Robo-Badge

Badge based on an Microchip ATtiny841 Microcontroller with Micronucleus USB Bootloader

BMP280-Breakout

Breakout with BMP280 Pressure and Temperature Sensor from Bosch Sensortec

CP2102N-Breakout

USB to Serial/UART Adapter with Silicon Labs Chipset (CP2102N)

CAM-M8Q-Breakout

Breakout with u-blox CAM-M8Q Multi GNSS Module (GPS, QZSS, GLONASS, BeiDou, Galileo)

Drawdio

Electronic pencil that makes music while you draw

StarterKit-Microcontroller

Starter-Kit for Microcontroller Boards

LCD-BackPack

Backpack to control HD44780 compatible displays over UART or I2C

RPi-WS2812-HAT

WS2812B intelligent RGB-LED Matrix HAT (Hardware Attached on Top) for Raspberry Pi

C++

senseBox-Shield

Shield for Arduino to connect Sensors

RPi-Camera-RingLicht

Camera light for Raspberry Pi camera based on WS2812 RGB-LEDs

TSL45315-Breakout

Breakout with AMS TSL45315 Light Sensor (visible)

C++

VEML6070-Breakout

Breakout with Vishay VEML6070 Light Sensor (UV)

C++

NB-IoT-Bee

XBee footprint compatible NB-IoT Module

Breadboard-Power-Supply

Power Supply for Breadboards

GLCD-Shield

Shield for Arduino with Display and Rotary Encoder / Navigation-Switch

ATWINC1500-Breakout

WiFi/WLAN Breakout with Atmel/Microchip ATWINC1500B and ATECC508A

mSD-Bee

XBee footprint compatible microSD Module

ACS72X-Breakout

Breakout with AllegroMicro ACS724/ACS725 Hall-Effect Current Sensor

senseBox-SolarCharger

SolarCharger extension for the senseBox MCU

C++

BlueFly-Shield

WiFi/WLAN Shield for Arduino with Atmel/Microchip ATWINC1500-MR210PB Module

BMP388-Breakout

Breakout with BMP388 Pressure and Temperature Sensor from Bosch Sensortec

FATSC

SD/USB coprocessor to connect USB memory drives or SD cards to a microcontroller

C++

Motor-Shield

Shield for Arduino to drive DC-Motors, Solenoids or Relays

Mic-Breakout

Breakout with pre-amplified Microphone based on a Maxim MAX4465

TOS100-Shield

Stepper Motor Driver Shield for Arduino based on a Trinamic TMC260

RPi-Breadboard-Adapter

Raspberry Pi to Breadboard Adapter

RGB-LED-Kits

RGB-LED Cube and RGB-LED Star

LoRa-Bee

XBee footprint compatible LoRa Module with HopeRF RFM9XW

HDC100X-Breakout

Breakout with TI HDC1000 or HDC1008 Humidity and Temperature Sensor

Arduino-Boards

Watterott Boards Package for Arduino IDE

Eitech-Robotics

Robotics Board based on an Microchip SAMW25 Module (SAMD21 ARM Cortex-M0+ and WINC1500 WiFi/WLAN SoC)

RTC-Breakout

Breakout with Micro Crystal RV-8523-C3 RTC (Real-Time-Clock) and CR1225 Battery

Python

watterott/StarterKit-Robotics

watterott

Reviews

Repository Details

More Repositories