Overview

Flex prompt is a flexible customizable prompt for Clink, and requires Clink v1.2.10 or higher.

There are several built-in prompt modules, and it's easy to add new custom prompt modules.
The style of the prompt can be customized in many ways as well.

Flex prompt for Clink was inspired by the zsh powerlevel10k theme by Roman Perepelitsa.
Some of the prompt modules are based on cmder-powerline-prompt.

Installation

Via .zip file

Go to the Releases page.
Download the latest clink-flex-prompt-*.zip file.
Extract the files from it into your Clink scripts directory (use clink info to find it if you're not sure where it is).

Or, via Scoop

Run scoop install clink-flex-prompt

Fonts

There is no "best" or "right" or "wrong" font. The most important thing is to pick a font whose shape you like.

Flex prompt's configuration wizard will ask few questions, and it's ok for some of the questions to look ugly -- choose the appropriate answer, and the wizard will adapt accordingly.

Flex prompt can use fancy characters, if you want, to personalize the prompt with shapes and icons. To use fancy characters, you'll need to find a font with Powerline characters and/or icon characters. The nerd fonts site has a large selection of special fonts. The configuration wizard lets you choose from the most common fancy characters, but you can also manually configure flex prompt (with Lua code) to use just about any special characters.

Benefits of fancy characters:

Your prompt will look fancy on the screen.

Drawbacks of fancy characters:

If you copy/paste from the screen to somewhere else, then fancy characters may not be readable by other people depending on what font they're using.
The same font may look different in different terminal programs, because of features or limitations in the terminal programs.
Some of the fancy characters require special fonts.

Here are some recommended fonts to consider:

Meslo Nerd Font patched by romkatv: this is a patched version of Meslo Nerd Font.
Cascadia Code: recent versions of this font include Powerline symbols, but the font doesn't include icon characters.
Caskaydia Cove Nerd Font: this is a patched version of Cascadia Code that adds many icon characters.
FiraCode Nerd Font: this is a patched version of Fira Code that adds Powerline symbols and many icon characters.
RobotoMono Nerd Font: this is a patched version of Roboto Mono that adds Powerline symbols and many icon characters.
And there are many other fonts to have fun with -- enjoy!

NOTE: Most Nerd Fonts have multiple variations of the font included. The flexprompt configure wizard asks questions to figure out which variation of Nerd Font you're using (if any).

Variations named "Nerd Font Mono" or "NF Mono" have small icons that take up only 1 cell (e.g. "RobotoMono Nerd Font Mono Medium").

Variations named just "Nerd Font" without "Mono" have larger double width icons that take up 2 cells (e.g. "RobotoMono Nerd Font Medium").

I installed a font; why won't it show up in the list of available terminal fonts?

The default built-in terminal window in Windows only lists a small set of predefined fonts. Other terminal hosts such as Windows Terminal or ConEmu make it easy to choose other fonts, without any extra steps.

If you want to add more fonts for the built-in terminal window, then you'll need to make some system registry changes. This article does a good job of collecting a variety of relevant info into one place. But if that link is broken when you're reading this, then you can do an internet search for "add fonts for console windows" or similar phrases.

Configuration Wizard

Flex prompt can be easily customized via its configuration wizard.

To start the wizard, run flexprompt configure and follow the instructions on the screen.

Advanced Configuration

The wizard doesn't cover everything, and more advanced configuration is possible by assigning settings manually in a flexprompt_config.lua file.

The script will look something like this:

flexprompt_config.lua

-- This pattern is in case this script runs before flexprompt.lua is loaded,
-- for example if they're in different directories.
flexprompt = flexprompt or {}
flexprompt.settings = flexprompt.settings or {}

-- Apply your settings here.
flexprompt.settings.style = "classic"
flexprompt.settings.heads = "pointed"
flexprompt.settings.lines = "two"
flexprompt.settings.left_prompt = "{battery}{cwd}{git}"
flexprompt.settings.right_prompt = "{exit}{overtype}{vpn}{duration}{time}"

Tip: By making your manual customizations modify settings (rather than replacing them), your customizations can adapt according to the options you've chosen in the flexprompt configuration wizard.

For example:
flexprompt.settings.left_prompt = flexprompt.settings.left_prompt:gsub("{git}", "{git:showremote}")
-- or
flexprompt.settings.left_prompt = flexprompt.settings.left_prompt .. "{my_custom_module}{python}"

Modules

The flexprompt.settings.left_prompt and flexprompt.settings.right_prompt string variables list prompt modules to be displayed.

"{admin}" shows whether the shell is running as administrator.
"{anyconnect}" shows the current Cisco AnyConnect VPN connection.
"{battery}" shows the battery level and whether the battery is charging.
"{break}" shows a break between two modules; is automatically discarded if adjacent to only one visible module.
"{conda}" shows the current Conda environment, if %CONDA_DEFAULT_ENV% is set.
"{cwd}" shows the current working directory.
"{duration}" shows the duration of the previous command, if more than 3 seconds.
"{env}" shows an environment variable.
"{exit}" shows the exit code of the previous command.
"{git}" shows git status.
"{hg}" shows Mercurial status.
"{histlabel}" shows the current %CLINK_HISTORY_LABEL%, if any.
"{keymap}" shows the current key bindings keymap (emacs mode, vi command mode, or vi insert mode).
"{k8s}" shows the current kubernetes context and namespace.
"{maven}" shows package info.
"{modmark}" shows a modified line indicator when the current line is a history entry and has been modified (only when the mark-modified-lines Readline config setting is on).
"{npm}" shows package name and version.
"{overtype}" shows indicator when overtype mode is on (i.e. when insert mode is off).
"{python}" shows the virtual environment.
"{scm}" shows source control management status (git, hg, svn, or custom SCM plugins).
"{svn}" shows Subversion status.
"{time}" shows the current time and/or date.
"{user}" shows the current user name and/or computer name.
"{vpn}" shows the current VPN or dialup connection.

Also, the following modules work together for a new "Bubbles" style, which is designed as a variation of the "lean" prompt style.

"{tbubble}" shows the top prompt line for the "Bubbles" style. You can add other modules in your top_prompt as well, even when using {tbubble}.
"{lbubble}" shows the left prompt for the "Bubbles" style. You can add other modules in your left_prompt as well, but they'll look best if they come after {lbubble}.
"{rbubble}" shows the right prompt for the "Bubbles" style. You can add other modules in your right_prompt as well, but they'll look best if they come before {rbubble}.

flexprompt.settings.left_prompt = "{battery}{user}{cwd}{git}"
flexprompt.settings.right_prompt = "{exit}{duration}{time}"

TBD: details about configuring the modules. In the meantime, you can search for "MODULE:" in flexprompt_modules.lua to find the available options for each module (including colors).

Style

"lean" shows prompt modules using only colored text.
"classic" shows prompt modules using colored text on a gray background.
"rainbow" shows prompt modules using text on colored backgrounds.

flexprompt.settings.style = "classic"

Note: The flexprompt configure wizard lets you choose a "Bubbles" style. The "Bubbles" style is designed for use with flexprompt.settings.style = "lean"; there is not a separate "bubbles" style.

Charset

"ascii" uses only ASCII characters, and is compatible with all fonts; text copy/pasted from the terminal display will look right everywhere.
"unicode" uses Unicode characters to add styling to the prompt, and requires fonts compatible with powerline symbols; text copy/pasted from the terminal display will look wrong when pasted somewhere that doesn't use a compatible font.

flexprompt.settings.charset = "unicode"

Frame Color

"lightest"
"light"
"dark"
"darkest"
Custom frame colors can be provided as { frame_color, background_color, fluent_text_color, separator_color }. The fields can be color name strings or ANSI escape code SGR arguments (e.g. "31" is red text).

These choose the prompt background color for the "classic" style, and choose the frame and connection color for all styles.

-- Use a predefined set of coordinated dark colors:
flexprompt.settings.frame_color = "dark"

-- Or use custom colors:
flexprompt.settings.frame_color =
{
    "38;5;242",     -- frame color (gray 44%)
    "38;5;238",     -- background color (gray 28%)
    "38;5;246",     -- text color (gray 60%)
    "38;5;234",     -- separator color (gray 12%)
}

Separators

For the "classic" style:

"none" is just a space between prompt modules.
"vertical" is a vertical bar.
"pointed" is a sideward-pointing triangle (requires Unicode).
"slant" is slanted from bottom left to top right.
"backslant" is slanted from top left to bottom right.
"round" is a semi circle (requires Unicode).
"dot" is a dot (requires Unicode).
"updiagonal" is a small slash from bottom left to top right (requires Unicode).
"downdiagonal" is a small slash from top left to bottom right (requires Unicode).
(See flexprompt.lua for the most up to date list.)
Custom separators can be provided as a table with two values, for the left and right separators.

For the "rainbow" style:

Any of the Heads or Tails options may be used as separators.

For all styles:

"connector" shows a frame connector (see the Connection section further below).

-- Use a predefined separator:
flexprompt.settings.separator = "pointed"

-- Or use a custom separator:
flexprompt.settings.separator = { "»", "«" }

Tails and Heads

Tails are at the outside ends of the prompts. Heads are at the inside ends.

"flat" is a flat vertical edge.
"pointed" is a sideward-pointing triangle (requires Unicode).
"slant" is slanted from bottom left to top right (requires Unicode).
"backslant" is slanted from top left to bottom right (requires Unicode).
"round" is a semi circle (requires Unicode).
"blurred" uses shaded block characters to fade the edge (requires Unicode).
Custom end types can be provided as { open_string, close_string }. However, that is advanced usage and you need to know how background and foreground colors work; that isn't covered in this documentation.

flexprompt.settings.tails = "flat"
flexprompt.settings.heads = "blurred"

Lines

"one" uses a single line. Any right-side prompt modules are shown if there is room, and if the input text hasn't reached them.
"two" uses two lines. The first line shows the prompt modules, and the second line is for input text.

flexprompt.settings.lines = "two"

Connection

Only when using "both" sides:

"disconnected" shows blank space between the left and right side prompts.
"dotted" shows dots between the left and right side prompts.
"solid" draws a horizontal line connecting the left and right side prompts.
"dashed" draws a horizontal line using minus signs to connect the left and right side prompts.
A custom connection can be provided as a string.

-- Use a predefined connection:
flexprompt.settings.connection = "solid"

-- Or use a custom connection:
flexprompt.settings.connection = "═"

Frame

When using "two" lines, left and right prompt frames can each be:

"none" shows no frame.
"square" shows a frame with square corners.
"round" shows a frame with rounded corners.
Custom frames can be provided as { top_frame, bottom_frame }.

-- Use predefined frame shapes:
flexprompt.settings.left_frame = "none"
flexprompt.settings.right_frame = "round"

-- Or use custom frame shapes:
flexprompt.settings.left_frame = { "╔═", "╚═" }
flexprompt.settings.right_frame = { "═╗", "◄───╜" }

Spacing

"compact" removes blank lines before the prompt.
"normal" neither removes nor adds blank lines before the prompt.
"sparse" removes blank lines before the prompt, and then inserts one blank line.

flexprompt.settings.spacing = "sparse"

Note: Clink v1.6.1 and higher have built-in support for a prompt.spacing setting, so flexprompt.settings.spacing is deprecated and ignored now. The flexprompt configure wizard will also automatically set Clink's prompt.spacing setting appropriately now.

Flow

"concise" shows minimal text for each prompt module.
"fluent" shows additional text for some prompt modules, to make the prompt "read" nicely.

flexprompt.settings.flow = "fluent"

Top Line

You can add an optional top line, above the left/right prompt text.

flexprompt.settings.top_prompt = "{histlabel}{user}"
flexprompt.settings.left_prompt = "{battery}{cwd}{git}{k8s}{npm}"
flexprompt.settings.right_prompt = "{exit}{duration}{time}"

The top line can optionally use a different style, as well.

flexprompt.settings.top_style = "lean"
flexprompt.settings.top_prompt = "{histlabel}{user}"
flexprompt.settings.style = "rainbow"
flexprompt.settings.left_prompt = "{battery}{cwd}{git}{k8s}{npm}"
flexprompt.settings.right_prompt = "{exit}{duration}{time}"

Note: If the top prompt uses a different style and a module appears in both the top prompt and the left or right prompts, then the module's colors in the top prompt will be used for the module in the left or right prompt. This happens because flexprompt only runs module's render function once, for efficiency, and the render function specifies the colors to use. It's very unusual for a module to show up more than once, so generally it shouldn't be a problem.

On Commands

You can make certain modules only show up when certain commands are typed.

For example, you might want the {k8s} Kubernetes module to only show up when you type kubectlSpace.

flexprompt.settings.oncommands = "moduleA=command1,moduleA=command2,moduleB=command1,moduleB=command3"
-- moduleA will only show up when "command1" or "command2" are typed.
-- moduleB will only show up when "command1" or "command3" are typed.

Miscellaneous Settings

-- Use all available icons:
flexprompt.settings.use_icons = true
-- Use icons only for the time and exit modules, and specifically disable icons for git:
-- This can be set in 2 ways, you can use ["key"] = true notation or key = true (no quotes)
flexprompt.settings.use_icons = { time_module = true, ["exit_module"] = true, git = false }

-- Enables battery level refresh in prompt:
flexprompt.settings.battery_idle_refresh = 30 -- every 30 seconds

-- Replaces %HOME% with ~ in the cwd module.
flexprompt.settings.use_home_tilde = true
-- Use additional symbol in cwd module in a git repo, when cwd type is 'smart' or 'rootsmart':
flexprompt.settings.symbols.cwd_git_symbol

-- Use custom prompt symbol (instead of >):
flexprompt.settings.symbols.prompt = "$"
-- Use custom prompt color (supersedes exit_zero_color and exit_nonzero_color):
flexprompt.settings.prompt_symbol_color = "magenta"
-- Use custom prompt symbol when overtype mode is on (i.e. insert mode is off):
flexprompt.settings.symbols.overtype_prompt = "#"
-- Use custom prompt symbol for the transient prompt:
flexprompt.settings.symbols.transient_prompt = ")"
-- Use custom prompt color when last exit code is zero:
flexprompt.settings.exit_zero_color = "brightgreen"
-- Use custom prompt color when last exit code is non-zero:
flexprompt.settings.exit_nonzero_color = "brightred"

-- Override a symbol that isn't in the font being used:
flexprompt.settings.symbol.charging = "++"

-- Override separators when style is 'lean':
flexprompt.settings.lean_separators = "   "

-- Run `git fetch` in a repo up to once every 60 minutes:
flexprompt.settings.git_fetch_interval = 60

-- Don't show duration unless a command takes at least this many seconds:
flexprompt.settings.duration_threshold = 10

-- Provide default arguments for a module:
flexprompt.defaultargs["module_name"] = "color=magenta"

-- Provide default arguments for a module, for a specific style (lean, classic, or rainbow):
flexprompt.defaultargs["module_name|rainbow"] = "color=blue,brightcyan"

-- Force flexprompt to tell git to take optional locks (not recommended):
flexprompt.settings.take_optional_locks = true

-- Disable detection of unpublished branches:
flexprompt.settings.dont_check_unpublished = true

-- Nerd Fonts version:  (e.g. NF version 3.0.0 and higher rearranged the icons)
flexprompt.settings.nerdfonts_version = 3
-- Nerd Fonts width:  (set to 1 to indicate font has mono width icons, or 2 to indicate double-width icons)
flexprompt.settings.nerdfonts_width = 2

-- Override certain icons with color emoji in Windows Terminal:
flexprompt.settings.use_color_emoji = true

-- Use Powerline icons (the font must support them):
flexprompt.settings.powerline_font = true

-- Supersede other settings and try to avoid displaying graphics that may not exist in all fonts.
flexprompt.settings.no_graphics = true

Writing Custom Prompt Modules

You can write prompt modules in Lua.

A prompt module can return a text string and a color for the text -- this adds a "segment" to the prompt. It can optionally return multiple pairs of text and colors to add multiple segments to the prompt. Or it can return nil to add no segments.

Put your prompt module code in a Lua file whose name starts with flexprompt_ in the same directory as the flexprompt.lua file.

Advanced: Since scripts are loaded in alphabetical order, the easiest thing to do is name your script something that follows after flexprompt_ alphabetically. But another more advanced option is to defer making use of flexprompt. until the first onbeginedit event, and then the script name wouldn't have the alphabetical order limitation.

Here is a basic example of a prompt module, which we'll call "mfm" as an abbreviation for "my first module":

-- This is the prompt module function.
local function my_first_module(args)
    -- It returns some text to show in the prompt, and a color for the text.
    -- (The args will be explained in the next section.)
    return "Hello World", "magenta"
end

-- This registers the prompt module function with flexprompt.
-- Pass a string, and a function.
-- In your prompt, refer to the prompt module by putting its name inside
-- squiggly braces, such as "{mfm}" in this example.
flexprompt.add_module("mfm", my_first_module)

With the above code installed, if you set your flexprompt.left_prompt string to include "{mfm}" then your prompt will include a magenta segment that says "Hello World".

Options

Prompt modules can accept arguments to customize them. There are two flexprompt API functions to help with that.

If a module name is followed by a colon : then everything between the colon and the closing brace } is passed to the prompt module function as a string.

Let's suppose your prompt string includes "{mfm:excited:capitalize=upper}" and look at how the my_first_module example could use the arguments.

The excited part does not have an equal = sign, so it is a keyword. Your module function can use flexprompt.parse_arg_keyword() to check whether a specific keyword is present.

The case=upper part includes an equal = sign, so it is a token. Your module function can use flexprompt.parse_arg_token() to retrieve the part following the equal = sign.

Here is the example prompt module function, updated to recognize the two example arguments described above.

-- The MFM module:
--
-- This module replaces "{mfm}" in your prompt string with "Hello World".
--
-- This module accepts two arguments.  To use an argument, append a colon and
-- the argument after the module name:
--      excited             Adds an exclamation mark to the prompt text.
--      case=type           Applies capitalization according to 'type':
--                          - 'upper' applies upper case.
--                          - 'lower' applies lower case.

-- This is the prompt module function.
local function my_first_module(args)
    -- The text to show normally.
    local text = "Hello World"

    -- Check for the 'excited' argument keyword.  If present, then let's add
    -- exclamation marks to the text to express excitement.
    local excited = flexprompt.parse_arg_keyword(args, "excited")
    if excited then
        text = text .. "!!!"
    end

    -- Check for the 'case' argument token.  If present, then apply upper or
    -- lower casing, depending on the value of the 'case' token.
    local case = flexprompt.parse_arg_token(args, "case")
    if case == "upper" then
        text = string.upper(text)
    elseif case == "lower" then
        text = string.lower(text)
    end

    -- Return the final version of the text, and the color for the prompt
    -- module's segment in the prompt string.
    return text, "magenta"
end

-- This registers the prompt module function with flexprompt.
flexprompt.add_module("mfm", my_first_module)

Colors

Flexprompt can apply colors to prompt modules' segments. Each prompt module controls its own colors. But prompt modules may accepts arguments to allow customizing their colors.

If a module will only apply one color, then its token name may be color. But if the module has more than one color, or if you think it ever might have more than one color, then give each color a separate name (e.g. clean and dirty and "{mfm:clean=green:dirty=yellow}").

Your module function can use flexprompt.parse_colors() to retrieve the specified colors.

Here is where styling comes up for the first time: Each prompt segment actually has three things: text string, main color, and alternate color. In the "lean" and "classic" prompt styles, the main color says what text color to use (the alternate color is not used). But in the "rainbow" style the main color says what background color to use, and the alternate color says what text color to use. If the alternate color is omitted, then "white" is assumed. Overriding the alternate color may be desirable sometimes, for example to improve contrast.

Now we'll update the example prompt module to have a customizable color:

-- The MFM module:
--
-- This module replaces "{mfm}" in your prompt string with "Hello World".
--
-- This module accepts two arguments.  To use an argument, append a colon and
-- the argument after the module name:
--      excited             Adds an exclamation mark to the prompt text.
--      case=type           Applies capitalization according to 'type':
--                          - 'upper' applies upper case.
--                          - 'lower' applies lower case.
--      color=main,alt      Customize the default color.

-- This is the prompt module function.
local function my_first_module(args)
    -- The text to show normally.
    local text = "Hello World"

    -- Check for the 'excited' argument keyword.  If present, then let's add
    -- exclamation marks to the text to express excitement.
    local excited = flexprompt.parse_arg_keyword(args, "excited")
    if excited then
        text = text .. "!!!"
    end

    -- Check for the 'case' argument token.  If present, then apply upper or
    -- lower casing, depending on the value of the 'case' token.
    local case = flexprompt.parse_arg_token(args, "case")
    if case == "upper" then
        text = string.upper(text)
    elseif case == "lower" then
        text = string.lower(text)
    end

    -- Set up the default colors, and then parse a 'color' token to override the
    -- defaults with customized colors.
    local color = "magenta"
    local altcolor = "black"
    local color_arg = flexprompt.parse_arg_token(args, "color")
    color, altcolor = flexprompt.parse_colors(color_arg, color, altcolor)

    -- Return the final version of the text, and the color for the prompt
    -- module's segment in the prompt string.
    return text, color, altcolor
end

-- This registers the prompt module function with flexprompt.
flexprompt.add_module("mfm", my_first_module)

Abbreviation When Too Wide

Prompt modules can optionally return a callback function for use in case the terminal is not wide enough for the full prompt to be displayed. If the prompt is too wide, flexprompt calls each module's callback function to get an abbreviated form of the module and uses that instead to help the prompt fit.

To provide a callback function, the prompt module should return a table with a condense_callback field:

return {
    -- Normal results; text and colors.
    "full module text here",
    "green",
    "black",
    -- Callback when short form is needed.
    condense_callback = function ()
        return {
            "mini text",
            "green",
            "black",
        }
    end
}

Async Prompt Filtering

Clink supports asynchronous prompt filtering, where the input line editor stays responsive even while a prompt filter runs an operation that takes a long time to complete (for example git status in a large repo).

It's easy to make your custom modules take advantage of async prompt filtering.

Step 1 -- Collect info to be shown in the prompt

Make a function that collects the info that should appear in the prompt. Make the function return a table containing the info.

-- This function uses async prompt filtering to count the number of files in the
-- current directory.
local function collect_files_info()
    local num = 0

    -- Run the `dir` command.
    local f = io.popen("dir /b /a-d *")
    if f then
        for line in f:lines() do
            num = num + 1
        end
        f:close()
    end

    -- Return the collected info in a table.
    return {
        count = num
    }
end

Step Two -- Make it collect the info asynchronously

Make a module that calls flexprompt.prompt_info(). We'll discuss the middle two parameters later -- they can be empty strings if you don't need them.

local files_data = {}

local function files_module(args)
    -- Use async prompt filtering to call the collect_files_info() function.
    local info = flexprompt.prompt_info(files_data, "", "", collect_files_info)

    -- Build the prompt text.
    local text
    if info.count then
        text = flexprompt.append_text(info.count, flexprompt.make_fluent_text("file(s)"))
    else
        -- When the count isn't known, we can say that it's counting.
        text = flexprompt.make_fluent_text("(counting files)")
    end

    return text, "cyan"
end

flexprompt.add_module("files", files_module)

Step Three -- [Optional] Maybe reset the cached prompt info

Async prompt filtering shows the previous prompt content until the async collection function finishes.

But sometimes you may know in advance that the previous prompt content is no longer relevant. There is a simple way to automatically discard the previous cached prompt content.

The flexprompt.prompt_info() function takes two parameters which, if either is different from the previous prompt, will automatically reset the cached prompt content.

For example, the {git} module passes the git repo root directory and the current git branch. This is so that if you cd to a different repo or git switch to a different branch, the prompt doesn't mislead by showing info from a different repo or branch.

So, since this sample {files} module counts the files in the current directory, it makes sense to use the current directory for one of those two parameters:

local function files_module(args)
    -- Use async prompt filtering to call the collect_foo_info() function.
    -- Passing os.getcwd() makes the cached prompt info reset upon changing to
    -- a different current directory, so it doesn't (briefly) show a count from
    -- the previous prompt.
    local info = flexprompt.prompt_info(files_data, os.getcwd(), "", collect_files_info)

    -- Build the prompt text.
    local text
    if info.count then
        text = flexprompt.append_text(info.count, flexprompt.make_fluent_text("file(s)"))
    else
        -- When the count isn't known, we can say that it's counting.
        text = flexprompt.make_fluent_text("(counting files)")
    end

    return text, "cyan"
end

Customizable Styling

TBD: there is a lot of styling available, but it's poorly documented, sorry. You can reverse engineer details from reading flexprompt.lua and the configuration option tables near the beginning of it.

Customizing Icons

TBD: for now this section just has a quick example showing the structure for icon definitions in flexprompt.

flexprompt.settings.symbol["icon_name_here"] =
{
    -- All fields here are optional; supply as many or as few as you want.

    -- Symbol to use in Windows Terminal, if flexprompt.settings.use_color_emoji is true.
    coloremoji      = "E",

    -- Symbol to use in Windows Terminal.
    winterminal     = "W",

    -- Symbol to use in ConEmu.
    conemu          = "C",

    -- Symbol to use with Nerd Fonts v3 fonts.
    -- Can be a string or a table:
                      -- String:  Use this symbol always.
    nerdfonts3      = "3",
                      -- Table:  Use second symbol "3 " with double-width icon fonts, otherwise use first symbol "3".
    nerdfonts3      = { "3", "3 " },

    -- Symbol to use with Nerd Fonts v2 fonts.
    -- Can be a string or a table:
                      -- String:  Use this symbol always.
    nerdfonts2      = "2",
                      -- Table:  Use second symbol "2 " with double-width icon fonts, otherwise use first symbol "2".
    nerdfonts2      = { "2", "2 " },

    -- Symbol to use with fonts that have Powerline characters but not Nerd Fonts icons.
    powerline       = "P",

    -- Symbol to use with Unicode fonts that don't have Powerline characters.
    unicode         = "U",

    -- Symbol to use in plain ASCII mode.
    ascii           = "A",

    -- Fallback symbol to use if none of the other available specializations are applicable.
    "F"
}

Running Actions

TBD

Flexprompt API Reference

TBD

License

clink-flex-prompt is distributed under the terms of The MIT License.

chrisant996/clink-flex-prompt

chrisant996

Reviews

Repository Details