zigbee2mqtt-networkmap

Custom Card for Home Assistant to show the Zigbee2mqtt network map with vue-d3-network.

Demo

Home Assistant setup

Update Zigbee2mqtt to version 1.17.0 or later, earlier version may not work.

This instruction is for Home Assistant 0.107 and later.

For 0.106 and earlier instruction can be found here.

Backend setup

In configuration.yaml of the Home Assistant installation:

mqtt:
  sensor:
    - name: Zigbee2mqtt Networkmap
      # if you change base_topic of Zigbee2mqtt, change state_topic accordingly
      state_topic: zigbee2mqtt/bridge/response/networkmap
      value_template: >-
        {{ now().strftime('%Y-%m-%d %H:%M:%S') }}
      # again, if you change base_topic of Zigbee2mqtt, change json_attributes_topic accordingly
      json_attributes_topic: zigbee2mqtt/bridge/response/networkmap
      json_attributes_template: "{{ value_json.data.value | tojson }}"

Frontend setup (HACS)

When installing the plugin via HACS, you'll need to add the resource manually.

• Edit your profile (bottom iten in the left menu in the web UI). Enable Advanced Mode.
• Go to Settings -> Dashboards and click the three dots in the upper right corner.
• Click Resources
• Click ADD RESOURCE in the bottom right
• Enter /hacsfiles/zigbee2mqtt-networkmap/zigbee2mqtt-networkmap.js in the URL field and select JavaScript Module. Click CREATE.
• Go to HACS -> Frontend. Here you should see the Zigbee2mqtt networkmap Card without any error messages.

Card setup (Dashboard Web UI)

In order to add this card to the dashboard, Use the Edit Dashboard on the top right , three-dots menu, add a manual card, and use this configuration:

type: custom:zigbee2mqtt-networkmap
entity: sensor.zigbee2mqtt_networkmap

Make sure to use the same name of the sensor defined under configuration.yaml, baseed on the Zigbee2mqtt Networkmap name.

Frontend setup (YAML mode)

Download zigbee2mqtt-networkmap.js and put it into <config-directory>/www/ directory.

Enable Dashboard YAML mode.

In configuration.yaml:

lovelace:
  mode: yaml
  resources:
    - url: /local/zigbee2mqtt-networkmap.js?v=0.8.0
      type: module

Card setup (YAML mode)

In ui-lovelace.yaml:

views:
  - title: Zigbee Network
    panel: true # this renders the first card on full width, other cards in this view will not be rendered
    cards:
      - type: custom:zigbee2mqtt-networkmap
        entity: sensor.zigbee2mqtt_networkmap
        # the following are optional:
        mqtt_base_topic: zigbee2mqtt # if you change base_topic of Zigbee2mqtt, change it accordingly
        mqtt_topic: zigbee2mqtt/bridge/request/networkmap # or you can specify the full mqtt topic, see https://www.zigbee2mqtt.io/guide/usage/mqtt_topics_and_messages.html#zigbee2mqtt-bridge-request
        mqtt_payload: { type: 'raw', routes: true }
        force: 3000 # decrease it to get smaller map if you have many devices
        node_size: 16
        font_size: 12
        link_width: 2
        height: 400 # height of the card
        # use this css config or use whatever css tech to change look and feel,
        # the same variable can also be used in Home Assistant themes, see https://www.home-assistant.io/components/frontend/#defining-themes
        css: |
          :host {
            --zigbee2mqtt-networkmap-node-color: rgba(18, 120, 98, .7);
            --zigbee2mqtt-networkmap-node-fill-color: #dcfaf3;
            --zigbee2mqtt-networkmap-node-pinned-color: rgba(190, 56, 93, .6);
            --zigbee2mqtt-networkmap-link-color: rgba(18, 120, 98, .5);
            --zigbee2mqtt-networkmap-hover-color: #be385d;
            --zigbee2mqtt-networkmap-link-selected-color: rgba(202, 164, 85, .6);
            --zigbee2mqtt-networkmap-label-color: #127862;
            --zigbee2mqtt-networkmap-arrow-color: rgba(18, 120, 98, 0.7);
            --zigbee2mqtt-networkmap-node-coordinator-color: rgba(224, 78, 93, .7);
            --zigbee2mqtt-networkmap-node-router-color: rgba(0, 165, 255, .7);
          }

Upgrade (YAML mode)

Replace <config-directory>/www/zigbee2mqtt-networkmap.js with new one, and change version string in configuration.yaml:

resources:
  - url: /local/zigbee2mqtt-networkmap.js?v=0.8.0 # change `v=0.7.0` to `v=0.8.0`
    type: module

And then refresh the browser.

FAQ

Q: How can I customize device names in the map?

A: The names showed in the map are given by Zigbee2mqtt, you need to configure Zigbee2mqtt to customize them, see https://www.zigbee2mqtt.io/guide/configuration/devices-groups.html#common-device-options for the friendly_name option.

Additionaly, HomeAssistant will automatically use the same names when MQTT auto discovery is enabled, see https://www.zigbee2mqtt.io/guide/usage/integrations/home_assistant.html#mqtt-discovery

Q: Some of my devices are detached.

A: This is probably a Zigbee2mqtt issue, see Koenkk/zigbee2mqtt#2436 for discussion.

Changelog

[0.8.0] - 2023-05-29

• Allow config mqtt full topic and payload, see Backend setup and Issue #45

[0.7.0] - 2021-08-18

• Update for new zigbee2mqtt API added in 1.17.0, thank @marcins

[0.6.0] - 2019-12-02

• Fixed TypeError if device type is not available, thank @ChrisScheffler
• Support HACS

[0.5.0] - 2019-08-27

• Recalculate width/height on window resize
• Make the arrows sharper
• Use css variables to allow theming
• Allow config extra css styles

[0.4.0] - 2019-08-23

• Workaround empty map problem in Firefox.

[0.3.0] - 2019-08-22

• Filter all dead links.

[0.2.0] - 2019-08-22

• Filter links with address 0x0000000000000000.

[0.1.0] - 2019-08-15

• Initial release.

Development

Install nodejs and yarn, clone the repo and install dependances:

git clone https://github.com/azuwis/zigbee2mqtt-networkmap.git
cd zigbee2mqtt-networkmap
yarn install

Compiles and hot-reloads for development

yarn serve

And open the demo at http://localhost:8080/ using web browser.

Or use Home Assistant for development, in configuration.yaml:

resources:
  # - url: /local/zigbee2mqtt-networkmap.js
  #   type: module
  - url: http://localhost:8080/zigbee2mqtt-networkmap.js
    type: js

Compiles and minifies for production

yarn build

Lints and fixes files

yarn lint