STM32CommandLine

1. DEMO

• 1.1 ：Connect the MCU and Xshell with UART port.

   | | |                _.--------._
  .-----.               |    PC    |
--|o    |----UART_TX----|  Xshell  |
--|     |----UART_RX----|          |
  '-----'               '----------'
   | | |

• 1.2 ：Check this demo: (My terminal: Xshell, you can also choose SecureCRT if you like)

• 1.3 ：Here is my configurations of Xshell:

2. 介绍（English）

• 2.1 ：一个命令行运行在stm32上，只需要提供一个串口即可实现。
• 2.2 ：配合队列处理串口数据，快速响应并退出中断。
• 2.3 ：可以移植到任意嵌入式系统，甚至51、AVR、PIC、stm8s、esp8266、esp32、Arduino等。
• 2.4 ：命令支持后续扩展，支持多种颜色的log输出到终端，方便调试。
• 2.5 ：支持历史命令查询，历史命令条数可自定义。

2. Introduction

• 2.1 : This project is a shell, a CLI(command line interface) like linux shell, demo project is based on STM32(a serial com port is needed).
• 2.2 : A fifo queue added for faster IRQ handler.
• 2.3 : You can port this shell into an embeded system, even 51, AVR, PIC, stm8s, esp8266, esp32, Arduino and so on..
• 2.4 : You can also add your own commands, it is helpful for programmers to debug, also support colorful debug fonts.
• 2.5 : History command support, and modify the amount of history that you want to save.

3. TODO

• Login Support.
• Command Completion.
• Need Your Advise.