[![Travis Status][trav_img]][trav_site] [![Appveyor Status][av_img]][av_site] [![Coverage Status][cov_img]][cov_site] ![Maintenance Status][maintenance-image]

Builder

Builder takes your npm tasks and makes them composable, controllable from a single point, and flexible.

npm is fantastic for controlling tasks (via scripts) and general project workflows. But a project-specific package.json simply doesn't scale when you're managing many (say 5-50) very similar repositories.

Enter Builder. Builder is "almost" npm, but provides for off-the-shelf "archetypes" to provide central sets of package.json scripts tasks, and dependencies and devDependencies for those tasks. The rest of this page will dive into the details and machinations of the tool, but first here are a few of the rough goals and motivations behind the project.

Single Point of Control: A way to define a specific set of tasks / configs / etc. for one "type" of project. For example, we have an ever-expanding set of related repos for our Victory project which all share a nearly-identical dev / prod / build workflow.
Flexibility: There are a number of meta tools for controlling JavaScript workflows / development lifecycles. However, most are of the "buy the farm" nature. This works great when everything is within the workflow but falls apart once you want to be "just slightly" different. Builder solves this by allowing fine grain task overriding by name, where the larger composed tasks still stay the same and allow a specific repo's deviation from "completely off the shelf" to be painless.
You Can Give Up: One of the main goals of builder is to remain very close to a basic npm workflow. So much so, that we include a section in this guide on how to abandon the use of Builder in a project and revert everything from archetypes back to vanilla npm package.json scripts, dependencies and devDependencies.
A Few "Nice to Haves" Over npm run <task>: Setting aside archetypes and multi-project management, builder provides cross-OS compatible helpers for common task running scenarios like concurrent execution (concurrent) and spawning the same tasks in parallel with different environment variables (env). It also provides useful controls for task retries, buffered output, setup tasks, etc.

Contents:

Overview
- Usage
Tasks
npm Config
Archetypes
Tips, Tricks, & Notes

Overview

At a high level builder is a tool for consuming package.json scripts commands, providing sensible / flexible defaults, and supporting various scenarios ("archetypes") for your common use cases across multiple projects.

Builder is not opinionated, although archetypes are and typically dictate file structure, standard configurations, and dev workflows. Builder supports this in an agnostic way, providing essentially the following:

NODE_PATH, PATH enhancements and module patterns to run, build, import from archetypes so task dependencies and configurations don't have to be installed directly in a root project.
A task runner capable of single tasks (run) or multiple concurrent tasks (concurrent).
An intelligent merging of package.json scripts tasks.

... and that's about it!

Usage

To start using builder, install and save builder and any archetypes you intend to use. We'll use the [builder-react-component][] archetype as an example.

Note: Most archetypes have an ARCHETYPE package and parallel ARCHETYPE-dev npm package. The ARCHETYPE package contains almost everything needed for the archetype (prod dependencies, scripts, etc.) except for the devDependencies which the latter ARCHETYPE-dev package is solely responsible for bringing in.

Global Install

For ease of use, one option is to globally install builder and locally install archetypes:

$ npm install -g builder
$ npm install --save builder-react-component
$ npm install --save-dev builder-react-component-dev

Like a global install of any Node.js meta / task runner tool (e.g., eslint, mocha, gulp, grunt) doing a global install is painful because:

You are tied to just one version of the tool for all projects.
You must also globally install the tool in CI, on servers, etc.

... so instead, we strongly recommend a local install described in the next section!

To help you keep up with project-specific builder requirements, a globally-installed builder will detect if a locally-installed version of builder is available and switch to that instead:

$ /GLOBAL/PATH/TO/builder
[builder:local-detect] Switched to local builder at: ./node_modules/builder/bin/builder-core.js

... now using local builder! ...

Local Install

To avoid tying yourself to a single, global version of builder, the option that we endorse is locally installing both builder and archetypes:

$ npm install --save builder
$ npm install --save builder-react-component
$ npm install --save-dev builder-react-component-dev

However, to call builder from the command line you will either need to either augment PATH or call the long form of the command:

PATH Augmentation

Our recommended approach is to augment your PATH variable with a shell configuration as follows:

Mac / Linux

# Safer version, but if you _have_ global installs, those come first.
export PATH="${PATH}:./node_modules/.bin"

# (OR) Less safe, but guarantees local node modules come first.
export PATH="./node_modules/.bin:${PATH}"

# Check results with:
echo $PATH

To make these changes permanent, add the export command to your .bashrc or analogous shell configuration file.

Windows

# Safer version, but if you _have_ global installs, those come first.
set PATH=%PATH%;node_modules\.bin

# (OR) Less safe, but guarantees local node modules come first.
set PATH=node_modules\.bin;%PATH%

# Check results with:
echo %PATH%

To make these changes permanent, please see this multi-OS article on changing the PATH variable: https://www.java.com/en/download/help/path.xml (the article is targeted for a Java executable, but it's analogous to our situation). You'll want to paste in ;node_modules\.bin at the end or node_modules\.bin; at the beginning of the PATH field in the gui. If there is no existing PATH then add a user entry with node_modules\.bin as a value. (It is unlikely to be empty because an npm installation on Windows sets the user PATH analogously.)

Full Path Invocation

Or you can run the complete path to the builder script with:

Mac / Linux

node_modules/.bin/builder <action> <task>

Windows

node_modules\.bin\builder <action> <task>

Configuration

After builder is available, you can edit .builderrc like:

---
archetypes:
  - builder-react-component

to bind archetypes.

... and from here you are set for builder-controlled meta goodness!

Builder Actions

Display general or command-specific help (which shows available specific flags).

$ builder [-h|--help|help]
$ builder help <action>
$ builder help <archetype>

Run builder help <action> for all available options. Version information is available with:

$ builder [-v|--version]

Let's dive a little deeper into the main builder actions:

builder run

Run a single task from script. Analogous to npm run <task>

$ builder run <task>

Flags:

--tries: Number of times to attempt a task (default: 1)
--setup: Single task to run for the entirety of <action>
--quiet: Silence logging
--log-level: Level to log at (debug, info, warn, error, none) (default: error)
--env: JSON object of keys to add to environment.
--env-path: JSON file path of keys to add to environment.
--expand-archetype: Expand node_modules/<archetype> with full path (default: false)
--builderrc: Path to builder config file (default: .builderrc)

builder concurrent

Run multiple tasks from script concurrently. Roughly analogous to npm run <task1> & npm run <task2> & npm run <task3>, but kills all processes on first non-zero exit (which makes it suitable for test tasks), unless --no-bail is provided.

$ builder concurrent <task1> <task2> <task3>

Flags:

--tries: Number of times to attempt a task (default: 1)
--setup: Single task to run for the entirety of <action>.
- Note: The --setup task is run at the start of the first main task to actually run. This may not be the first specified task however, as pre tasks could end up with main tasks starting out of order.
--queue: Number of concurrent processes to run (default: unlimited - 0|null)
--[no-]buffer: Buffer output until process end (default: false)
--[no-]bail: End all processes after the first failure (default: true)
--quiet: Silence logging
--log-level: Level to log at (debug, info, warn, error, none) (default: error)
--env: JSON object of keys to add to environment.
--env-path: JSON file path of keys to add to environment.
--expand-archetype: Expand node_modules/<archetype> with full path (default: false)
--builderrc: Path to builder config file (default: .builderrc)

Note that tries will retry individual tasks that are part of the concurrent group, not the group itself. So, if builder concurrent --tries=3 foo bar baz is run and bar fails twice, then only bar would be retried. foo and baz would only execute once if successful.

builder envs

Run a single task from script concurrently for each item in an array of different environment variables. Roughly analogous to:

$ FOO=VAL1 npm run <task> & FOO=VAL2 npm run <task> & FOO=VAL3 npm run <task>

... but kills all processes on first non-zero exit (which makes it suitable for test tasks), unless --no-bail is provided. Usage:

$ builder envs <task> <json-array>
$ builder envs <task> --envs-path=<path-to-json-file>

Examples:

Mac / Linux

$ builder envs <task> '[{ "FOO": "VAL1" }, { "FOO": "VAL2" }, { "FOO": "VAL3" }]'
$ builder envs <task> '[{ "FOO": "VAL1", "BAR": "VAL2" }, { "FOO": "VAL3" }]'

Mac / Linux / Windows

$ builder envs <task> "[{ \"FOO\": \"VAL1\" }, { \"FOO\": \"VAL2\" }, { \"FOO\": \"VAL3\" }]"
$ builder envs <task> "[{ \"FOO\": \"VAL1\", \"BAR\": \"VAL2\" }, { \"FOO\": \"VAL3\" }]"

Flags:

--tries: Number of times to attempt a task (default: 1)
--setup: Single task to run for the entirety of <action>
- Note: The --setup task is run at the start of the first main task to actually run. This may not be the first specified task however, as pre tasks could end up with main tasks per environment object starting out of order.
--queue: Number of concurrent processes to run (default: unlimited - 0|null)
--[no-]buffer: Buffer output until process end (default: false)
--[no-]bail: End all processes after the first failure (default: true)
--envs-path: Path to JSON env variable array file (default: null)
--quiet: Silence logging
--log-level: Level to log at (debug, info, warn, error, none) (default: error)
--env: JSON object of keys to add to environment.
--env-path: JSON file path of keys to add to environment.
--expand-archetype: Expand node_modules/<archetype> with full path (default: false)
--builderrc: Path to builder config file (default: .builderrc)

Note: The environments JSON array will overwrite existing values in the environment. This includes environment variables provided to / from builder from things such as npm config and the --env/--env-path flags.

So, for example, if you invoke builder with:

$ builder envs <task> '[{"FOO": "ENVS"}]' --env='{"FOO": "FLAG"}'

The environment variable FOO will have a value of "ENVS" with the single environment object array item given to builder envs overriding the --env flag value.

Setup Task

A task specified in --setup <task> will have the following flags apply to the setup task as apply to the main task:

--env
--env-path
--quiet
--log-level

The following flags do not apply to a setup task:

-- custom flags
--tries
--expand-archetype
--queue
--buffer

That said, if you need things like --tries, etc., these can be always coded into a wrapped task like:

"scripts": {
  "setup-alone": "while sleep 1; do echo SETUP; done",
  "setup": "builder run --tries=5 setup-alone",
  "test": "mocha",
  "test-full": "builder run --setup=setup test"
}

Task Lifecycle

Builder executes pre<task> and post<task> tasks the same as npm does, with some perhaps not completely obvious corner cases.

The Basics

If you have:

"scripts": {
  "prefoo": "echo PRE",
  "foo": "echo TEMP",
  "postfoo": "echo POST"
}

And run builder run foo, then just like npm, builder will run in order:

prefoo
foo
postfoo

assuming each task succeeds, otherwise execution is terminated.

pre and post tasks can be provided in an archetype and overridden in a root package.json in the exact same manner as normal Builder tasks.

Other Builder Actions

builder run works essentially the same as npm run. Things get a little messy with Builder's other execution options:

builder envs runs pre|post tasks exactly once regardless of how many concurrent executions of the underlying task (with different environment variables) occur.

builder concurrent runs appropriate pre|post tasks for each independent task. So, for something like:

"scripts": {
  "prefoo": "echo PRE FOO",
  "foo": "echo TEMP FOO",
  "postfoo": "echo POST FOO",
  "prebar": "echo PRE BAR",
  "bar": "echo TEMP BAR",
  "postbar": "echo POST BAR"
}

running builder concurrent foo bar would run all of the above tasks at the appropriate lifecycle moment.

Note that things like a --queue=NUM limit on a concurrent task will have all of the pre, main, and post task need to finish serial execution before the next spot is freed up.

The --bail flag applies to all of a single tasks pre, main, and post group. So if any of those fail, it's as if the main task failed.

Builder Flags During Pre and Post

Applicable Flags

When executing a <task> that has pre<task> and/or post<task> entries, the following execution flags do apply to the pre|post tasks.

--env
--env-path
--quiet
--log-level
--expand-archetype

These flags have mixed application:

--queue: Applies for concurrent, but not envs. The flag is invalid for run.
--buffer: Applies for concurrent, but not envs. The flag is invalid for run.
--bail: Applies for concurrent, but not envs. The flag is invalid for run. A pre<task>, <task>, and a post<task> are treated as a group, so a failure of any short-circuits the rests and ends with failures. But with --bail=false a failure doesn't stop execution of the other groups.

The following flags do not apply to pre/post tasks:

-- custom flags
--tries
--setup: A task specified in --setup <task> will not have pre|post tasks apply.

We will explain a few of these situations in a bit more depth:

Custom Flags

The special -- flag with any subsequent custom flags to the underlying task are only passed to the the main <task> and not pre<task> or post<task>. The rationale here is that custom command line flags most likely just apply to a single shell command (the main one).

So, for example

"scripts": {
  "prefoo": "echo PRE",
  "foo": "echo TEMP",
  "postfoo": "echo POST"
}

running builder run foo -- --hi would produce:

PRE
TEMP --hi
POST

Other Flags

By contrast, the various other Builder-specific flags that can be applied to a task like --env, etc., will apply to pre|post tasks, under the assumption that control flags + environment variables will most likely want to be used for the execution of all commands in the workflow.

So, for example:

"scripts": {
  "prefoo": "echo PRE $VAR",
  "foo": "echo TEMP $VAR",
  "postfoo": "echo POST $VAR"
}

running builder run foo --env '{"VAR":"HI"}' would produce:

PRE HI
TEMP HI
POST HI

Task Prefix Complexities

For the above example, if you have a task named preprefoo, then running foo or even prefoo directly will not run preprefoo. Builder follows npm's current implementation which is roughly "add pre|post tasks to current execution as long as the task itself is not prefixed with pre|post". (Note that yarn does not follow this logic in task execution).

Custom Flags

Just like npm run <task> [-- <args>...], flags after a -- token in a builder task or from the command line are passed on to the underlying tasks. This is slightly more complicated for builder in that composed tasks pass on the flags all the way down. So, for tasks like:

"scripts": {
  "down": "echo down",
  "way": "builder run down -- --way",
  "the": "builder run way -- --the",
  "all": "builder run the -- --all"
}

We can run some basics (alone and with a user-added flag):

$ builder run down
down

$ builder run down -- --my-custom-flag
down --my-custom-flag

If we run the composed commands, the -- flags are accumulated:

$ builder run all
down --way --the --all

$ builder run all -- --my-custom-flag
down --way --the --all --my-custom-flag

The rough heuristic here is if we have custom arguments:

If a builder <action> command, pass through using builder-specific environment variables. (Builder uses _BUILDER_ARGS_CUSTOM_FLAGS).
If a non-builder command, then append without -- token.

Expanding the Archetype Path

Builder tasks often refer to configuration files in the archetype itself like:

"postinstall": "webpack --bail --config node_modules/<archetype>/config/webpack/webpack.config.js",

In npm v2 this wasn't a problem because dependencies were usually nested. In npm v3, this all changes with aggressive flattening of dependencies. With flattened dependencies, the chance that the archetype and its dependencies no longer have a predictable contained structure increases.

Thus, commands like the above succeed if the installation ends up like:

node_modules/
  <a module>/
    node_modules/
      <archetype>/
        node_modules/
          webpack/

If npm flattens the tree like:

node_modules/
  <a module>/
  <archetype>/
  webpack/

Then builder can still find webpack due to its PATH and NODE_PATH mutations. But an issue arises with something like a postinstall step after this flattening in that the current working directory of the process will be PATH/TO/node_modules/<a module>/, which in this flattened scenario would not find the file:

node_modules/<archetype>/config/webpack/webpack.config.js

because relative to node_modules/<a module>/ it is now at:

../<archetype>/config/webpack/webpack.config.js

To address this problem builder has an --expand-archetype flag that will replace an occurrence of the specific node_modules/<archetype> in one of the archetype commands with the full path to the archetype, to guarantee referenced files are correctly available.

The basic heuristic of things to replace is:

^node_modules/<archetype>: Token is very first string.
[\s\t]node_modules/<archetype>: Whitespace before token.
['"]node_modules/<archetype>: Quotes before token.
- Note that the path coming back from the underlying require.resolve(module) will likely be escaped, so things like whitespace in a path + quotes around it may not expand correctly.

Some notes:

The only real scenario you'll need this is for a module that needs to run a postinstall or something as part of an install in a larger project. Root git clone projects controlled by an archetype should work just fine because the archetype will be predictably located at: node_modules/<archetype>
The --expand-archetype flag gets propagated down to all composed builder commands internally.
The --expand-archetype only expands the specific archetype string for its own commands and not those in the root projects or other archetypes.
The replacement assumes you are using / forward slash characters which are the recommended cross-platform way to construct file paths (even on windows).
The replacement only replaces at the start of a command string or after whitespace. This means it won't replace ../node_modules/<archetype> or even ./node_modules/<archetype>. (In the last case, just omit the ./ in front of a path -- it's a great habit to pick up as ./ breaks on Windows and omitting ./ works on all platforms!)

Tasks

The underlying concept here is that builder script commands simply are npm-friendly package.json script commands. Pretty much anything that you can execute with npm run <task> can be executed with builder run <task>.

Builder can run 1+ tasks based out of package.json scripts. For a basic scenario like:

{
  "scripts": {
    "foo": "echo FOO",
    "bar": "echo BAR"
  }
}

Builder can run these tasks individually:

$ builder run foo
$ builder run bar

Sequentially via || or && shell helpers:

$ builder run foo && builder run bar

Concurrently via the Builder built-in concurrent command:

$ builder concurrent foo bar

With concurrent, all tasks continue running until they all complete or any task exits with a non-zero exit code, in which case all still alive tasks are killed and the Builder process exits with the error code.

npm Config

builder supports package.json config properties the same way that npm does, with slight enhancements in consideration of multiple package.json's in play.

`npm` Config Overview

As a refresher, npm utilizes the config field of package.json to make "per-package" environment variables to scripts tasks. For example, if you have:

{
  "config": {
    "my_name": "Bob"
  },
  "scripts": {
    "get-name": "echo Hello, ${npm_package_config_my_name}."
  }
}

and ran:

$ npm run get-name
Hello, Bob.

More documentation about how npm does per-package configuration is at:

Builder Configs

In builder, for a single package.json this works essentially the same in the above example.

$ builder run get-name
Hello, Bob.

However, builder has the added complexity of adding in config variables from archetypes and the environment. So the basic resolution order for a config environment variable is:

Look to npm_package_config_<VAR_NAME>=<VAR_VAL> on command line.
If not set, then use <root>/package.json:config:<VAR_NAME> value.
If not set, then use <archetype>/package.json:config:<VAR_NAME> value.

So, let's dive in to a slightly more complex example:

// <archetype>/package.json
{
  "config": {
    "my_name": "ARCH BOB"
  },
  "scripts": {
    "get-name": "echo Hello, ${npm_package_config_my_name}."
  }
}

// <root>/package.json
{
  "config": {
    "my_name": "ROOT JANE"
  }
}

When we run the builder command, the <root> value overrides:

$ builder run get-name
Hello, ROOT JANE.

We can inject a command line flag to override even this value:

$ npm_package_config_my_name="CLI JOE" builder run get-name
Hello, CLI JOE.

Note that the ability to override via the process environment is unique to builder and not available in real npm.

Config Notes

Tip - Use String Values

Although config properties can be something like:

"config": {
  "enabled": true
}

We strongly recommend that you always set strings like:

"config": {
  "enabled": "true"
}

And deal just with string values in your tasks, and files. The reasoning here is that when overriding values from the command line, the values will always be strings, which has a potential for messy, hard-to-diagnose bugs if the overridden value is not also a string.

npmrc Configuration

npm has additional functionality for config values that are not presently supported, such as issuing commands like npm config set <pkg-name>:my_name Bill that store values in ~/.npmrc and then override the package.json values at execution time. We may extend support for this as well, but not at the present.

Command Line Environment Variables

npm does not support overriding config environment variables from the actual environment. So doing something in our original example like:

$ npm_package_config_my_name=George npm run get-name
Hello, Bob.

In fact, npm will refuse to even add environment variables starting with npm_package_config to the npm run environment. E.g.

{
  "config": {},
  "scripts": {
    "get-npm-val": "echo NPM VAR: ${npm_package_config_var}",
    "get-env-val": "echo ENV VAR: ${env_var}"
  }
}

The npm config variable doesn't make it through:

$ npm_package_config_var=SET npm run get-npm-val
NPM VAR:

While a normal environment variable will:

$ env_var=SET npm run get-env-val
ENV VAR: SET

By contrast, builder does pass through environment variables already existing on the command line, and moreover those overrides takes precedence over the root and archetype package.json values. Those same examples with builder show that the environment variables do make it through:

$ npm_package_config_var=SET builder run get-npm-val
NPM VAR: SET

$ env_var=SET builder run get-env-val
ENV VAR: SET

Things are a little more complex when using with builder envs, but the rough rule is that the environment JSON array wins when specified, otherwise the existing environment is used:

$ npm_package_config_var=CLI builder envs get-npm-val --queue=1 \
  '[{}, {"npm_package_config_var":"This Overrides"}]'
NPM VAR: CLI
NPM VAR: This Overrides

Archetypes

Archetypes deal with common scenarios for your projects. Like:

[builder-react-component][]: A React component
A React application server
A Chai / jQuery / VanillaJS widget

Archetypes typically provide:

A package.json with builder-friendly script tasks.
Dependencies and dev dependencies for all of the archetype script tasks.
Configuration files for all script tasks.

In most cases, you won't need to override anything. But, if you do, pick the most granular scripts command in the archetype you need to override and define just that in your project's package.json script section. Copy any configuration files that you need to tweak and re-define the command.

Task Resolution

The easiest bet is to just have one archetype per project. But, multiple are supported. In terms of scripts tasks, we end up with the following example:

ROOT/package.json
ROOT/node_modules/ARCHETYPE_ONE/package.json
ROOT/node_modules/ARCHETYPE_TWO/package.json

Say we have a .builderrc like:

---
archetypes:
  - ARCHETYPE_ONE
  - ARCHETYPE_TWO

The resolution order for a script task (say, foo) present in all three package.json's would be the following:

Look through ROOT/package.json then the configured archetypes in reverse order: ARCHETYPE_TWO/package.json, then ARCHETYPE_ONE/package.json for a matching task foo
If found foo, check if it is a "pass-through" task, which means it delegates to a later instance -- basically "foo": "builder run foo". If so, then look to next instance of task found in order above.

Special Archetype Tasks

Archetypes use conventional scripts task names, except for the following special cases:

"npm:postinstall"
"npm:preversion"
"npm:version"
"npm:test"

These tasks are specifically actionable during the npm lifecycle, and consequently, the archetype mostly ignores those for installation by default, offering them up for actual use in your project.

We strongly recommend entirely avoiding npm lifecycle task names in your archetype package.json files. So, instead of having:

// <archetype>/package.json
// Bad
"test": "builder concurrent --buffer test-frontend test-backend"

We recommend something like:

// <archetype>/package.json
// Good / OK
"npm:test": "builder run test-all",
"test-all": "builder concurrent --buffer test-frontend test-backend"

// Also OK
"npm:test": "builder concurrent --buffer test-frontend test-backend"

and then in your <root>/package.json using the real lifecycle task name.

"test": "builder run npm:test"

Creating an Archetype

Moving common tasks into an archetype is fairly straightforward and requires just a few tweaks to the paths defined in configuration and scripts in order to work correctly.

Initializing a Project

An archetype is simply a standard npm module with a valid package.json. To set up a new archetype from scratch, make a directory for your new archetype, initialize npm and link it for ease of development.

$ cd path/to/new/archetype
$ npm init
$ npm link

From your consuming project, you can now link to the archetype directly for ease of development after including it in your dependencies and creating a .builderrc as outlined above in configuration.

$ cd path/to/consuming/project
$ npm link new-archetype-name

Managing the `dev` Archetype

Because builder archetypes are included as simple npm modules, two separate npm modules are required for archetypes: one for normal dependencies and one for dev dependencies. Whereas in a non-builder-archetype project you'd specify dev dependencies in devDependencies, with builder all dev dependencies must be regular dependencies on a separate dev npm module.

builder is designed so that when defining which archetypes to use in a consuming project's .builderrc, builder will look for two modules, one named appropriately in dependencies (ex: my-archetype) and one in devDependencies but with -dev appended to the name (ex: my-archetype-dev).

To help with managing these while building a builder archetype, install builder-support to create and manage a dev/ directory within your archetype project with it's own package.json which can be published as a separate npm module. builder-support will not only create a dev/package.json with an appropriate package name, but will also keep all the other information from your archetype's primary package.json up to date as well as keep README.md and .gitignore in parity for hosting the project as a separate npm module.

Get started by installing and running builder-support gen-dev:

$ npm install builder-support --save-dev
$ ./node_modules/.bin/builder-support gen-dev

TIP: Create a task called "builder:gen-dev": "builder-support gen-dev" in your archetype to avoid having to type out the full path each time you update your project's details.

For ease of development, npm link the dev dependency separately:

$ cd dev
$ npm link

Then from your consuming project, you can link to the dev package.

$ cd path/to/consuming/project
$ npm link new-archetype-name-dev

Read the builder-support docs to learn more about how dev archetypes are easily managed with builder-support gen-dev.

Node Require Resolution and Module Pattern

As a background primer, whenever a file has a require("lib-name") in it, Node performs the following check for /path/to/ultimate/file.js:

/path/to/ultimate/node_modules/lib-name
/path/to/node_modules/lib-name
/path/node_modules/lib-name
/node_modules/lib-name

After this, Node then checks for NODE_PATH for additional paths to search. This presents a potentially awkward pattern when combined with npm deduplication / flattening for say a file like: <root>/node_modules/<archetype>/config/my-config.js that requires lib-name@right-version as follows:

Node modules layout:

<root>/
  node_modules/
    lib-name@wrong-version
    <archetype>/
      config/my-config.js         // require("lib-name");
    <archetype-dev>/
      node_modules/
        lib-name@right-version

This unfortunately means that the search path for require("lib-name") is:

# From file path priority resolution
<root>/node_modules/<archetype>/config/node_modules
<root>/node_modules/<archetype>/node_modules
<root>/node_modules/node_modules
<root>/node_modules                                   // Matches `lib-name@wrong-version`!!!

# Now, from `NODE_PATH`
<root>/node_modules/<archetype>/node_modules
<root>/node_modules/<archetype-dev>/node_modules      // Too late for `right-version`.

The Module Pattern

To remedy this situation, we encourage a very simple pattern to have Node.js require's start from the dev archetype when appropriate by adding a one-line file to the dev archetype: <archetype-dev>/require.js

// Contents of <archetype-dev>/require.js
module.exports = require;

By exporting the require from the dev archetype, the resolution starts in the dev archetype and thus ensures the dev archetype "wins" for the archetype tasks. Thus in any archetype files that do a require, simply switch to:

var mod = require("<archetype-dev>/require")("lib-name");             // Module
var modPath = require("<archetype-dev>/require").resolve("lib-name"); // Module path

And the dependency from the dev archetype is guaranteed to "win" no matter what happens with actual module layout from npm installation.

Note that because a file from within the normal <archetype> will naturally search <archetype>/node_modules before hitting <root>/node_modules you do not need to use this require pattern for normal archetype dependencies in archetype Node.js files.

Node.js files in the normal production archetype do not need a <archetype>/require.js file akin to the dev archetype because <archetype>/node_modules is already at the top of the require search path. However, some projects may wish to have an archetype control and provide application dependencies and dev dependencies, which we discuss in the next section

ES.next Imports and The Module Pattern

The module pattern works great for any require()-based CommonJS code. Unfortunately, when using babel and ES.next imports like:

import _ from "lodash";

The module pattern is not available because the actual require("lodash") statement spit out during transpilation is not directly accessible to the developer.

Fortunately (and unsurprisingly) we have a babel plugin to enable the module pattern in ES.next code: [babel-plugin-replace-require][babel-plugin-replace-require]. The plugin can easily be configured with tokens to insert dev archetypes in requires produced by babel transpilation. For example, say we wanted to get lodash from above from our dev archetype, we would configure a .babelrc like:

{
  "plugins": [
    ["replace-require", {
      "DEV_ARCHETYPE": "require('<archetype-dev>/require')"
    }]
  ]
}

Then prepend our custom token to the source ES.next code:

import _ from "DEV_ARCHETYPE/lodash";

When transpiled, the output would become:

"use strict";

var _lodash = require('<archetype-dev>/require')("lodash");

var _lodash2 = _interopRequireDefault(_lodash);

function _interopRequireDefault(obj) { return obj && obj.__esModule ? obj : { default: obj }; }

giving us the correct module pattern.

Webpack and Module Pattern

An analogous situation occurs for frontend JS code in the production archetype, but with a different solution. The underlying issue is that Webpack cannot ingest:

// src/foo.js
var mod = require("<archetype-dev>/require")("lib-name");

like Node.js can, so we need a little help in the form of a loader.

Note: Previous incarnations of this documentation suggested mutating Webpack code (resolve.root) and loader (resolveLoader.root) configurations. We no longer suggest this as the loader pattern in this section is much more precise and doesn't lead to potential prod-vs-dev ambiguities in module use.

Turning to the above example, we can use the [webpack-alternate-require-loader][webpack-alternate-require-loader] to rewrite CommonJS forms of the module pattern into fully-resolved paths on disk that work for webpack.

Let's start with our webpack configuration:

// webpack.config.js
module.exports = {
  module: {
    loaders: [
      {
        test: /\.js$/,
        loader: "webpack-alternate-require-loader",
        query: JSON.stringify({
          "<archetype-dev>/require": require.resolve("<archetype-dev>/require")
        })
      }
    ]
  }
};

With this configuration, Webpack will parse our above code sample and actually perform the resolution of lib-name using the require provided in <archetype-dev>/require producing ultimate code like:

// lib/foo.js
var mod = require("/RESOLVED/PATH/TO/lib-name");

This essentially converts a runtime lookup of the require starting from the dev archetype to a build time lookup performed by webpack.

Conveniently, this plugin also works with code produced by babel-plugin-replace-require when configured as specified in the previous section.

Shared Node / Frontend Code: The best part of this plugin is that if you have shared code between Node.js and the frontend, you can have the exact same code work in both places -- unparsed for Node.js and processed via Webpack for the frontend.

Application vs. Archetype Dependencies

Out of the box builder does not manage application dependencies, instead managing dependencies only for builder workflows and tasks, e.g. things starting with the builder command.

Most notably, this means that if your application code includes a dependency like lodash:

// <root>/src/index.js
var _ = require("lodash");

module.exports = _.camelCase("Hi There");

and the root project is consumed by anything besides a builder command, then it must have a dependency like:

// <root>/package.json
"dependencies": {
  "lodash": "^4.2.1"
}

However, if you want to use builder to also manage application dependencies, then you can follow the module pattern and provide an <archetype>/require.js file consisting of:

// Contents of <archetype>/require.js
module.exports = require;

The root project could then require code like:

var modFromProd = require("<archetype>/require")("lib-name");               // Module
var pathFromProd = require("<archetype>/require").resolve("lib-name");      // Module path
var modFromDev = require("<archetype-dev>/require")("lib-name");            // Module
var pathFromDev = require("<archetype-dev>/require").resolve("lib-name");   // Module path

Using the above pattern, <archetype> or <archetype-dev> dependencies would override <root>/node_modules dependencies reliably and irrespective of npm flattening.

So, turning back to our original example, we could utilize archetype dependencies by refactoring to something like:

// <root>/src/index.js
var _ = require("<archetype>/require")("lodash");

module.exports = _.camelCase("Hi There");

and dev code like:

// <root>/test/index.js
var _ = require("<archetype-dev>/require")("lodash");

module.exports = _.camelCase("Hi There");

after which you would not need a lodash dependency in root/package.json.

Moving `dependencies` and `scripts` to a New Archetype

Once everything is configured and npm link'd, it should be easy to move scripts to your archetype and quickly test them out from a consuming project.

Moving `dependencies` and `devDependencies` from an Existing `package.json`

copy dependencies to package.json dependencies.
copy devDependencies to dev/package.json dependencies.

Note that you should only copy dependencies from <root>/package.json to <archetype>/package.json that are needed within the archetype itself for:

Execution of a script. (E.g., the istanbul script).
Required by a configuration file in the archetype. (E.g., webpack if a webpack configuration calls require("webpack")).

You can then remove any dependencies only used by the scripts tasks that you have moved to the archetype. However, take care to not remove real application dependencies unless you are using a module pattern to provide application dependencies.

Moving `scripts` and Config Files

All scripts defined in archetypes will be run from the root of the project consuming the archetype. This means you have to change all paths in your scripts to reference their new location within the archetype.

An example script and config you may be moving to an archetype would look like:

"test-server-unit": "mocha --opts test/server/mocha.opts test/server/spec"

When moving this script to an archetype, we'd also move the config from test/server/mocha.opts within the original project to within the archetype such as config/mocha/server/mocha.opts.

For this example script, we'd need to update the path to mocha.opts as so:

"test-server-unit": "mocha --opts node_modules/new-archetype-name/config/mocha/server/mocha.opts test/server/spec"

Any paths that reference files expected in the consuming app (in this example test/server/spec) do not need to change.

Updating Path and Module References in Config Files

Any JavaScript files run from within an archetype (such as config files) require a few changes related to paths now that the files are being run from within an npm module. This includes all require() calls referencing npm modules and all paths to files that aren't relative.

For example, karma.conf.js:

module.exports = function (config) {
  require("./karma.conf.dev")(config);

  config.set({
    preprocessors: {
      "test/client/main.js": ["webpack"]
    },
    files: [
      "sinon/pkg/sinon",
      "test/client/main.js"
    ],
  });
};

All non-relative paths to files and npm modules need to be full paths, even ones not in the archetype directory. For files expected to be in the consuming project, this can be achieved by prepending process.cwd() to all paths. For npm modules, full paths can be achieved by using require.resolve().

An updated config might look like:

var path = require("path");
var ROOT = process.cwd();
var MAIN_PATH = path.join(ROOT, "test/client/main.js");

module.exports = function (config) {
  require("./karma.conf.dev")(config);

  config.set({
    preprocessors: {
      [MAIN_PATH]: ["webpack"]
    },
    files: [
      require.resolve("sinon/pkg/sinon"),                             // Normal archetype
      require("<archetype-dev>/require").resolve("sinon/pkg/sinon"),  // Dev archetype
      MAIN_PATH
    ],
  });
};

Example `builder` Archetype Project Structure

.
├── CONTRIBUTING.md
├── HISTORY.md
├── LICENSE.txt
├── README.md
├── config
│   ├── eslint
│   ├── karma
│   ├── mocha
│   │   ├── func
│   │   │   ├── mocha.dev.opts
│   │   │   └── mocha.opts
│   │   └── server
│   │       └── mocha.opts
│   └── webpack
│       ├── webpack.config.coverage.js
│       ├── webpack.config.dev.js
│       ├── webpack.config.hot.js
│       ├── webpack.config.js
│       └── webpack.config.test.js
├── dev
│   └── package.json
│   └── require.js
└── package.json

Tips, Tricks, & Notes

PATH, NODE_PATH Resolution

Builder uses some magic to enhance PATH and NODE_PATH to look in the installed modules of builder archetypes and in the root of your project (per normal). We mutate both of these environment variables to resolve in the following order:

PATH:

<cwd>/node_modules/<archetype>/.bin
<cwd>/node_modules/<archetype-dev>/.bin
<cwd>/node_modules/.bin
Existing PATH

require + NODE_PATH: For file.js with a require

/PATH/TO/file.js (all sub directories + node_modules going down the tree)
<cwd>/node_modules/<archetype>/node_modules
<cwd>/node_modules/<archetype-dev>/node_modules
<cwd>/node_modules
Existing NODE_PATH

The order of resolution doesn't often come up, but can sometimes be a factor in diagnosing archetype issues and script / file paths, especially when using npm v3.

Environment Variables

Builder clones the entire environment object before mutating it for further execution of tasks. On Mac/Linux, this has no real change of behavior of how the execution environment works. However, on Windows, there are some subtle issues with the fact that Windows has a case-insensitive environment variable model wherein you can set PATH in a node process, but internally this is transformed to set Path. Builder specifically handles PATH correctly across platforms for it's own specific mutation.

However, if your tasks rely on the Windows coercion of case-insensitivity of environment variables, you may run into some idiosyncratic problems with tasks.

Alternative to `npm link`

In some cases, npm link can interfere with the order of resolution. If you run into resolution problems, you can develop locally with the following in your consuming project's package.json as an alternative to npm link:

{
  "dependencies": {
    "YOUR_ARCHETYPE_NAME": "file:../YOUR_ARCHETYPE_REPO"
  },
  "devDependencies": {
    "YOUR_ARCHETYPE_NAME_dev": "file:../YOUR_ARCHETYPE_REPO/dev"
  }
}

Project Root

The enhancements to NODE_PATH that builder performs can throw tools / libraries for a loop. Generally speaking, we recommend using require.resolve("LIBRARY_OR_REQUIRE_PATH") to get the appropriate installed file path to a dependency.

This comes up in situations including:

Webpack loaders
Karma included files

The other thing that comes up in our Archetype configuration file is the general requirement that builder is running from the project root, not relative to an archetype. However, some libraries / tools will interpret "./" as relative to the configuration file which may be in an archetype.

So, for these instances and instances where you typically use __dirname, an archetype may need to use process.cwd() and be constrained to only ever running from the project root. Some scenarios where the process.cwd() path base is necessary include:

Webpack entry points, aliases
Karma included files (that cannot be require.resolve-ed)

Avoid npm Lifecycle Commands

We recommend not using any of the special npm scripts commands listed in https://docs.npmjs.com/misc/scripts such as:

prepublish, postinstall
test
stop, start

in your archetype scripts. This is due to the fact that the archetype package.json files are themselves consumed by npm for publishing (which can lead to tasks executing for the archetype instead of the project using the archetype) and potentially lead to awkward recursive composed task scenarios.

Instead, we recommend adding an npm:<task> prefix to your tasks to identify them as usable in root projects for real npm lifecycle tasks.

We plan on issuing warnings for archetypes that do implement lifecycle tasks in: #81

Other Process Execution

The execution of tasks generally must originate from Builder, because of all of the environment enhancements it adds. So, for things that themselves exec or spawn processes, like concurrently, this can be a problem. Typically, you will need to have the actual command line processes invoked by Builder.

I Give Up. How Do I Abandon Builder?

Builder is designed to be as close to vanilla npm as possible. So, if for example you were using the builder-react-component archetype with a project package.json like:

"scripts": {
  "postinstall": "builder run npm:postinstall",
  "preversion": "builder run npm:preversion",
  "version": "builder run npm:version",
  "test": "builder run npm:test",
  /* other deps */
},
"dependencies": {
  "builder": "v2.0.0",
  "builder-react-component": "v0.0.5",
  /* other deps */
},
"devDependencies": {
  "builder-react-component-dev": "v0.0.5",
  /* other deps */
}

and decided to no longer use Builder, here is a rough set of steps to unpack the archetype into your project and remove all Builder dependencies:

Copy all ARCHETYPE/package.json:dependencies to your PROJECT/package.json:dependencies (e.g., from builder-react-component). You do not need to copy over ARCHETYPE/package.json:devDependencies.
Copy all ARCHETYPE/package.json:scripts to your PROJECT/package.json:scripts that do not begin with the builder: prefix. Remove the npm: prefix from any scripts tasks and note that you may have to manually resolve tasks of the same name within the archetype and also with your project.
Copy all ARCHETYPE/package.json:config variables to your PROJECT/package.json:config.
Copy all ARCHETYPE-dev/package.json:dependencies to your PROJECT/package.json:devDependencies (e.g., from builder-react-component-dev)
Copy all configuration files used in your ARCHETYPE into the root project. For example, for builder-react-component you would need to copy the builder-react-component/config directory to PROJECT/config (or a renamed directory).
Replace all instances of require("<archetype-dev>/require") and require("<archetype>/require") with require in configuration / other Node.js files from the archetype.
Review all of the combined scripts tasks and:
- resolve duplicate task names
- revise configuration file paths for the moved files
- replace instances of builder run <task> with npm run <task>
- for builder concurrent <task1> <task2> tasks, first install the concurrently package and then rewrite to: concurrent 'npm run <task1>' 'npm run <task2>'

... and (with assuredly a few minor hiccups) that's about it! You are Builder-free and back to a normal npm-controlled project.

Maintenance Status:

Archived: This project is no longer maintained by Formidable. We are no longer responding to issues or pull requests unless they relate to security concerns. We encourage interested developers to fork this project and make it their own!

FormidableLabs/builder

FormidableLabs

Reviews

Repository Details

Builder

Overview

Usage

Global Install

Local Install

PATH Augmentation

Full Path Invocation

Configuration

Builder Actions

builder run

builder concurrent

builder envs

Setup Task

Task Lifecycle

The Basics

Other Builder Actions

Builder Flags During Pre and Post

Task Prefix Complexities

Custom Flags

Expanding the Archetype Path

Tasks

npm Config

npm Config Overview

Builder Configs

Config Notes

Tip - Use String Values

npmrc Configuration

Command Line Environment Variables

Archetypes

Task Resolution

Special Archetype Tasks

Creating an Archetype

Initializing a Project

Managing the dev Archetype

Node Require Resolution and Module Pattern

The Module Pattern

ES.next Imports and The Module Pattern

Webpack and Module Pattern

Application vs. Archetype Dependencies

Moving dependencies and scripts to a New Archetype

Moving dependencies and devDependencies from an Existing package.json

Moving scripts and Config Files

Updating Path and Module References in Config Files

Example builder Archetype Project Structure

Tips, Tricks, & Notes

PATH, NODE_PATH Resolution

Environment Variables

Alternative to npm link

Project Root

Avoid npm Lifecycle Commands

Other Process Execution

I Give Up. How Do I Abandon Builder?

Maintenance Status:

More Repositories

`npm` Config Overview

Managing the `dev` Archetype

Moving `dependencies` and `scripts` to a New Archetype

Moving `dependencies` and `devDependencies` from an Existing `package.json`

Moving `scripts` and Config Files

Example `builder` Archetype Project Structure

Alternative to `npm link`