Sven Petersen (@svenpetersen1965)
  • Stars
    star
    1,221
  • Global Rank 25,280 (Top 0.9 %)
  • Followers 337
  • Following 10
  • Registered over 7 years ago
  • Most used languages
    G-code
    36.4 %
    C++
    27.3 %
    PLSQL
    18.2 %
    Assembly
    18.2 %
  • Location ๐Ÿ‡ฉ๐Ÿ‡ช Germany
  • Country Total Rank 1,622
  • Country Ranking
    G-code
    1
    PLSQL
    10
    C++
    1,130

Top repositories

1

C64-Diagnostic-Rev.-586220-Harness

A harness for the Diagnostic Rev. 586220 Test for the Commodore C64
G-code
161
star
2

C64-A-V-Adaptor

An A/V-adaptor board for the C64
82
star
3

C64-WiFi-Modem-User-Port

A NodeMCU (ESP8266) based WiFi modem for the C64's user port
G-code
79
star
4

Diag64cart

A multiple diagnostic cartridge for the Commodore C64 and/or C128
57
star
5

C64-replacement-PSU-230VAC-

This is a replacement PSU (230VAC input) for the Commodore C64.
54
star
6

C64-PSU-Global

A replacement PSU for the Commodore C64, which works with 230V/115V
49
star
7

VIC-20-Hyper-Expander

A ROM cartridge with RAM Expansion
37
star
8

Epyx-FastLoad

A rebuild of the Epyx Fast Load cartridge for the Commodore C64
37
star
9

DIN-connector_soldering-aid-The-Potato

33
star
10

Pi1541-HAT

A HAT for the Raspberry Pi, that allows to emulate the Commodore C64 floppy disk drive 1541. Switches and IEC-Bus detachable.
PLSQL
32
star
11

C64-Keyboard-Controlled-Kernal-Switch

C++
31
star
12

C64-Kernal-Adaptor-Switch-short-board-

This is a Kernal Adapter/Switch for the Commodore C64, ASSY250469 (short board).
29
star
13

Joystick-for_commodore_and_atar

This is a joystick for Commodore C64 etc.
27
star
14

Versa64Case

A case for the Versa64Cart
25
star
15

1541-parallel-adapter-SpeedDOS

This is a reliable and easy to build parallel User Port Adapter for the Commodore 1541/1541-II
25
star
16

C64-PSU-Combi

A PSU for the Commodore C64 and up to two 1541-II floppy disk drives
23
star
17

Commodore-VIC-20-Super-Expander-II

A Super Expander Cartridge with the option for EPROMs (instead of the original ROMs)
22
star
18

VIC-20_Diagnostics

This a a Diagnostics Harness for the Commodore VIC-20.
22
star
19

Commodore-Keyboard-Tester

This is a tester for Commodore matrix keyboards
22
star
20

C64---Cart64out

Cart64out is a breakout board for the Commodore C64 Expansion Port
21
star
21

C64_PSU_Z66

This is a PSU for the Commodore C64 in the Kradex Z66 case
21
star
22

VIC-20_AV-Adapter

An Adapter for connecting the Commodore VIC-20 to video equipment with off the shelve A/V-cables.
G-code
19
star
23

C64-CHARSET-Adaptor-Switch

An Adaptor for the Character ROM of the Commodore C64
18
star
24

C64-Kernal-Adapter-Switch-Long-Board

This is a Kernal Adapter/Switch for the Commodore C64 long board
17
star
25

C64-Kernal-2.1

This Kernal prevents the killer CBM80 signature, that some games leave in memory from hooking up the C64 for a while
17
star
26

LumaFix64

15
star
27

C64-Promenade-Model-D

This is a remake of an EPROM programmer, originally created by Jason-Ranheim
15
star
28

SIDalyzer

This is a software for analyzing the Commodore C64 SID. Every parameter for every voice can be set separately. The base address of the SID can be selected from a list or entered manually.
15
star
29

C64-Control-Port-Switch-Rapid-Fire-

This is a Control Port Switch for the C64. It provides a rapid fire function
C++
14
star
30

C128-A-V-Adapter

13
star
31

Project-overview

This is an overview of all of my Github repositories
13
star
32

VIC-20-RAM-Expansion-Test-Software

A Test Software for RAM Expansions of the Commodore VIC-20
Assembly
12
star
33

openC64case

A case for the SukkoPera's openC64cart (8k and 16k)
12
star
34

Stepper_Motor_Controller

C++
12
star
35

IEC-Bus-Breakout-Board

This is a breakout board for the Commodore C64/C128/C16/VIC-20 etc. IEC-Bus
11
star
36

PET_CBM_1541_Adapter

This is an adapter for connecting the 1541 (or other IEC floppy disk drives) to the Userport of a CBM8032 etc.
11
star
37

23128-Adapter-passive

Commodore, C16, C254, EPROM, Adapter
10
star
38

Ultimate-64-Keyboard-Adapter

This is an extension for the Ultimate 64 (elite) keyboard connector to get it into a position, that can be reached easily with the standard length keyboard cable.
10
star
39

REX-9628-Extern-Kernal-8

This is the reverse engineering of the REX Datentechnik 9628 Extern Kernal 8
10
star
40

PET-Diagnostic-Clip

This is a modern remake of the two Commodore Diagnostic Clips
G-code
9
star
41

C64-WiFi-Modem-Adapter-for-PET-CBM

This is an adapter for connecting a WiFi-Modem to teh PET/CBM User Port
8
star
42

VIC-20_Character_ROM_Adapter

A character ROM adapter for the Commodore VIC-20 for 27C64...512 EPROMs
8
star
43

Atari-XL-XE-A-V-Adapter

This is an A/V-Adapter for the Atari 8bit XL and XE-
7
star
44

CBM-Tape-Pi-PCB

7
star
45

Illuminated-Commmodore-logo

This is, what you need for your hobby retro computer projects: a Commodore logo, which is illuminated with two LEDs!
6
star
46

PET-2332-Adapter

An EPROM adapter for the 2332 sockets in the Commodore (dynamic) PET and 40xx/80xx
6
star
47

PET-A-V-Interface

And A/V Interface for Commodore PET computers
5
star
48

Kernal64cart

A simple Kernal Cartridge for the Commodore C64, which has to get the /HIRAM signal for functioning 100%
PLSQL
4
star
49

PET-IEEE-488-Extension

This is a splitter and cable adapter for the Commodore PET IEEE-488 edge connector port
4
star
50

Versa64cart-adapter_km20-z7

A 3D printed adapter the the Kradex Z-7 and the Maszczyk KM-20 cartridge case
4
star
51

Illuminated-64-logo

Thsi is a 3D printed illuminated (Commodore) 64 Logo
4
star
52

RS232-loopback

This is a loopback module for the serial interface (RS232 and TTL).
4
star
53

PET-CBM-SCRGRID

Prints a grid on the screen of the Commodore PET and CBM computers
Assembly
4
star
54

Commodore-Port-Breakout

3
star
55

Framemeister_Overlay_English

An overlay for the Framemeister XRGB mini remote control (English)
3
star
56

AVR-ISP-Adapter

The ISP (in system programming) connector for Atmel ยตControllers is not compatible for breadboards. This is an adater, which allows to connect a 2x3 pin programmer connector to the projects.
2
star