%

Introduction

make4ht is a build system for \TeX4ht, \TeX\ to XML converter. It provides a command line tool that drives the conversion process. It also provides a library that can be used to create customized conversion tools. An example of such a tool is tex4ebook, a tool for conversion from \TeX\ to ePub and other e-book formats.

See section \ref{sec:htlatex} for some reasons why you should consider to use make4ht instead of htlatex,
section \ref{sec:output} talks about supported output formats and extensions and section \ref{sec:buildfiles} describes build files, which can be used to execute additional commands or post-process the generated files.

Usage

The basic conversion from \LaTeX\ to HTML using make4ht can be executed using the following command:

$ make4ht filename.tex

It will produce a file named filename.html if the compilation goes without fatal errors.

Command line options {#clioptions}

\label{sec:clioptions}

make4ht - build system for TeX4ht
Usage:
make4ht [options] filename ["tex4ht.sty op." "tex4ht op." 
     "t4ht op" "latex op"]
-a,--loglevel (default status) Set log level.
            possible values: debug, info, status, warning, error, fatal
-b,--backend (default tex4ht) Backend used for xml generation.
     possible values: tex4ht or lua4ht
-c,--config (default xhtml) Custom config file
-d,--output-dir (default "")  Output directory
-e,--build-file (default nil)  If the build filename is different 
     than `filename`.mk4
-f,--format  (default nil)  Output file format
-j,--jobname (default nil)  Set the jobname
-l,--lua  Use lualatex for document compilation
-m,--mode (default default) Switch which can be used in the makefile
-n,--no-tex4ht  Disable DVI file processing with tex4ht command
-s,--shell-escape Enables running external programs from LaTeX
-u,--utf8  For output documents in utf8 encoding
-x,--xetex Use xelatex for document compilation
-v,--version  Print version number
<filename> (string) Input filename

Option handling

It is possible to invoke make4ht in the same way as htlatex:

$ make4ht filename "customcfg, charset=utf-8" "-cunihtf -utf8" "-dfoo"

Note that this will not use make4ht routines for the output directory handling. See section \ref{sec:output-dir} for more information about this issue. To use these routines, change the previous listing to:

$ make4ht -d foo filename "customcfg, charset=utf-8" "-cunihtf -utf8"

This call has the same effect as the following:

$ make4ht -u -c customcfg -d foo filename

Output directory does not have to exist, it make4ht creates it automatically. Specified path can be relative to the current directory, or absolute:

$ make4ht -d use/current/dir/ filename
$ make4ht -d ../gotoparrentdir filename
$ make4ht -d ~/gotohomedir filename
$ make4ht -d c:\documents\windowspathsareworkingtoo filename

The short options that do not take parameters can be collapsed:

$ make4ht -ulc customcfg -d foo filename

Input from the standard input

To pass the output from other commands to make4ht, use the - character as a filename. It is best to use this feature together with the --jobname or -j option.

$ cat hello.tex | make4ht -j world -

Change amount of information printed on the command line

By default, make4ht tries to be quiet, so it hides most of the command line messages and output from the executed commands. It displays status messages, warnings, and errors. The logging level can be selected using the --loglevel or -a options. If the compilation fails, it may be useful to display more information using the info or debug levels.

$ make4ht -a debug faulty.tex

Difference of make4ht from htlatex

\label{sec:htlatex}

\TeX4ht\ system supports several output formats, most notably XHTML, HTML 5 and ODT, but it also supports TEI or Docbook.

The conversion can be invoked using several scripts, which are distributed with \TeX4ht. They differ in parameters passed to the underlying commands.

These scripts invoke \LaTeX\ or Plain \TeX\ with special instructions to load the tex4ht.sty package. The \TeX\ run produces a special DVI file that contains the code for the desired output format. The produced DVI file is then processed using the tex4ht command, which in conjunction with the t4ht command produces the desired output files.

Passing of command line arguments to low-level commands used in the conversion

The basic conversion script provided by \TeX4ht\ system is named htlatex. It compiles \LaTeX\
files to HTML with this command sequence:

$ latex $latex_options 'code for loading tex4ht.sty \input{filename}'
$ latex $latex_options 'code for loading tex4ht.sty \input{filename}'
$ latex $latex_options 'code for loading tex4ht.sty \input{filename}'
$ tex4ht $tex4ht_options filename
$ t4ht $t4ht_options filename

The options for various parts of the system can be passed on the command line:

$ htlatex filename "tex4ht.sty options" "tex4ht_options" "t4ht_options" "latex_options"

For basic HTML conversion it is possible to use the most basic invocation:

$ htlatex filename.tex

It can be much more involved for the HTML 5 output in UTF-8 encoding:

$ htlatex filename.tex "xhtml,html5,charset=utf-8" " -cmozhtf -utf8"

make4ht can simplify it:

$ make4ht -u filename.tex

The -u option requires the UTF-8 encoding. HTML 5 is used as the default output format by make4ht.

More information about the command line arguments can be found in section \ref{sec:clioptions}.

Compilation sequence

htlatex has a fixed compilation order and a hard-coded number of \LaTeX\ invocations.

It is not possible to execute additional commands during the compilation. When we want to run a program that interacts with \LaTeX, such as Makeindex or Bibtex, we have two options. The first option is to create a new script based on htlatex and add the wanted commands to the modified script. The second option is to execute htlatex, then the additional and then htlatex again. The second option means that \LaTeX\ will be invoked six times, as each call to htlatex executes three calls to \LaTeX. This can lead to significantly long compilation times.

make4ht provides a solution for this issue using a build file, or extensions. These can be used for interaction with external tools.

make4ht also provides compilation modes, which enables to select commands that should be executed using a command line option.

There is a built-in draft mode, which invokes \LaTeX\ only once, instead of the default three invocations. It is useful for the compilations of the document before its final stage, when it is not important that all cross-references work. It can save quite a lot of the compilation time:

$ make4ht -um draft filename.tex

Another buil-in mode is clean. It executes the Make:clean() command to remove all generated and temporary files from the current directory. No \LaTeX\ compilation happens in this mode.

It should be used in this way:

# copy generated files to a direcory
$ make4ht -d outdir filename.tex 
# remove all generated files in the current dir
# the -a info option will print files that are removed
$ make4ht -m clean -a info filename.tex

More information about the build files can be found in section \ref{sec:buildfiles}.

Handling of the generated files

\label{sec:output-dir}

There are also issues with the behavior of the t4ht application. It reads the .lg file generated by the tex4ht command. This file contains information about the generated files, CSS instructions, calls to the external applications, instructions for image conversions, etc.

t4ht can be instructed to copy the generated files to an output directory, but it doesn't preserve the directory structure. When the images are placed in a
subdirectory, they will be copied to the output directory, losing the directory structure. Links will be pointing to a non-existing subdirectory. The following command should copy all output files to the correct destinations.

$ make4ht -d outputdir filename.tex

Image conversion and postprocessing of the generated files

\TeX4ht\ can convert parts of the document to images. This is useful for diagrams or complicated math, for example.

By default, the image conversion is configured in a .env file. It has a bit of strange syntax, with operating system dependent rules. make4ht provides simpler means for the image conversion in the build files. It is possible to change the image conversion parameters without a need to modify the .env file. The process is described in section \ref{sec:imageconversion}.

It is also possible to post-process the generated output files. The post-processing can be done either using external programs such as XSLT processors and HTML Tidy or using Lua functions. More information can be found in section \ref{sec:postprocessing}.

Output file formats and extensions

\label{sec:output}

The default output format used by make4ht is html5. A different format can be requested using the --format option. Supported formats are:

• xhtml
• html5
• odt
• tei
• docbook

The --format option can be also used for extension loading.

Extensions

Extensions can be used to modify the build process without the need to use a build file. They may post-process the output files or request additional commands for the compilation.

The extensions can be enabled or disabled by appending +EXTENSION or -EXTENSION after the output format name:

 $ make4ht -uf html5+tidy filename.tex

Available extensions:

common_filters

: clean the output HTML files using filters.

common_domfilters

: clean the HTML file using DOM filters. It is more powerful than common_filters. Used DOM filters are fixinlines, idcolons, joincharacters, sectionid and tablerows.

copy_images

: Copies the images to the output directory. This is useful if the original images are stored in directories above the document directory.

detect_engine

: detect engine and format necessary for the document compilation from the magic comments supported by \LaTeX\ editors such as TeXShop or TeXWorks. Add something like the following line at the beginning of the main \TeX\ file:

 `%!TEX TS-program = xelatex`

 It supports also Plain \TeX, use for example `tex` or `luatex` as the program name.

dvisvgm_hashes

: efficient generation of SVG pictures using Dvisvgm. It can utilize multiple processor cores and generates only changed images.

inlinecss

: load the inlinecss DOM filter.

join_colors

: load the joincolors DOM filter for all HTML files.

latexmk_build

: use Latexmk for the \LaTeX\ compilation.

mathjaxnode

: (deprecated, use mjcli extension instead) Old information: use mathjax-node-page to convert from MathML code to HTML + CSS or SVG. See the available settings.

mjcli

: use mjcli to convert math in MathML or \LaTeX\ format to plain HTML + CSS. MathML is used by default. If you want to use \LaTeX\ math, add "mathjax" option on the command line (like make4ht -f html5+mjcli filename.tex "mathjax"). See the available settings.

odttemplate

: it automatically loads the odttemplate filter (page \pageref{sec:odttemplate}).

preprocess_input

: compilation of the formats supported by Knitr (.Rnw, .Rtex, .Rmd, .Rrst) and also Markdown and reStructuredText formats. It requires R + Knitr installation, it requires also Pandoc for formats based on Markdown or reStructuredText.

staticsite

: build the document in a form suitable for static site generators like Jekyll.

tidy

: clean the HTML files using the tidy command.

Build files

\label{sec:buildfiles}

make4ht supports build files. These are Lua scripts that can adjust the build process. They can request external applications like BibTeX or Makeindex, pass options to the commands, modify the image conversion process, or post-process the generated files.

make4ht tries to load default build file named as filename + .mk4 extension. It is possible to select a different build file with -e or --build-file command line option.

Sample build file:

Make:htlatex()
Make:match("html$", "tidy -m -xml -utf8 -q -i ${filename}")

Make:htlatex() is preconfigured command for calling \LaTeX\ with the tex4ht.sty package loaded. In this example, it will be executed only once. After the compilation, the tidy command is executed on the output HTML files.

Note that it is not necessary to call tex4ht and t4ht commands explicitly in the build file, they are called automatically.

User commands

It is possible to add more commands like Make:htlatex using the Make:add command:

Make:add("name", "command", {settings table}, repetition)

This defines the name command, which can be then executed using Make:name() command in the build file.

The name and command parameters are required, the rest of the parameters are optional.

The defined command receives a table with settings as a parameter at the call time. The default settings are provided by make4ht. Additional settings can be declared in the Make:add commands, user can also override the default settings when the command is executed in the build file:

Make:name({hello="world"})

More information about settings, including the default settings provided by make4ht, can be found in section \ref{sec:settings} on page \pageref{sec:settings}.

The command function

\label{sec:commandfunction}

The command parameter can be either a string template or function:

Make:add("text", "echo hello, input file: ${input}")

The template can get a variable value from the parameters table using a ${var_name} placeholder. Templates are executed using the operating system, so they should invoke existing OS commands.

The settings table table

The settings table parameter is optional. If it is present, it should be a table with new settings available in the command. It can also override the default make4ht settings for the defined command.

Make:add("sample_function", function(params) 
  for k, v in pairs(params) do 
    print(k..": "..v) 
  end, {custom="Hello world"}
)

Repetition

The repetition parameter specifies the maximum number of executions of the particular command. This is used for instance for tex4ht and t4ht commands, as they should be executed only once in the compilation. They would be executed multiple times when they are included in the build file, as they are called by make4ht by default. Because these commands allow only one repetition, the second execution is blocked.

Expected exit code

You can set the expected exit code from a command with a correct_exit key in the settings table. The compilation will be terminated when the command returns a different exit code.

Make:add("biber", "biber ${input}", {correct_exit=0})

Commands that execute lua functions can return the numerical values using the return statement.

This mechanism isn't used for \TeX, because it doesn't differentiate between fatal and non-fatal errors. It returns the same exit code in all cases. Because of this, log parsing is used for a fatal error detection instead. Error code value 1 is returned in the case of a fatal error, 0 is used otherwise. The Make.testlogfile function can be used in the build file to detect compilation errors in the TeX log file.

Provided commands

Make:htlatex

: One call to the TeX engine with special configuration for loading of the tex4ht.sty package.

Make:clean

: This command removes all generated files, including images, HTML files and various auxilary files, from the current directory. It keeps files whose file names don't match the input file name. It is preferable to use make4ht -m clean filename.tex to clean output files.

Make:httex

: Variant of Make:htlatex suitable for Plain \TeX.

Make:latexmk

: Use Latexmk for the document compilation. tex4ht.sty will be loaded automatically.

Make:tex4ht

: Process the DVI file and create output files.

Make:t4ht

: Create the CSS file and generate images.

Make:biber

: Process bibliography using the biber command.

Make:pythontex

: Process the input file using pythontex.

Make:bibtex

: Process bibliography using the bibtex command.

Make:xindy

: Generate index using Xindy index processor.

Make:makeindex

: Generate index using the Makeindex command.

Make:xindex

: Generate index using the Xindex command.

File matches

\label{sec:postprocessing}

Another type of action that can be specified in the build file is Make:match. It can be used to post-process the generated files:

Make:match("html$", "tidy -m -xml -utf8 -q -i ${filename}")

The above example will clean all output HTML files using the tidy command.

The Make:match action tests output filenames using a Lua pattern matching function.
It executes a command or a function, specified in the second argument, on files whose filenames match the pattern.

The commands to be executed can be specified as strings. They can contain ${var_name} placeholders, which are replaced with corresponding variables from the settings table. The templating system was described in subsection \ref{sec:commandfunction}. There is an additional variable available in this table, called filename. It contains the name of the current output file.

If a function is used instead, it will get two parameters. The first one is the current filename, the second one is the settings table.

Make:match("html$", function(filename, settings)
  print("Post-processing file: ".. filename)
  print("Available settings")
  for k,v in pairs(settings)
    print(k,v)
  end
  return true

end)

Multiple post-processing actions can be executed on each filename. The Lua action functions can return an exit code. If the exit code is false, the execution of the post-processing chain for the current file will be terminated.

Filters

\label{sec:filters}

To make it easier to post-process the generated files using the match actions, make4ht provides a filtering mechanism thanks to the make4ht-filter module.

The make4ht-filter module returns a function that can be used for the filter chain building. Multiple filters can be chained into a pipeline. Each filter can modify the string that is passed to it from the previous filters. The changes are then saved to the processed file.

Several built-in filters are available, it is also possible to create new ones.

Example that use only the built-in filters:

local filter = require "make4ht-filter"
local process = filter{"cleanspan", "fixligatures", "hruletohr"}
Make:htlatex()
Make:match("html$",process)

Function filter accepts also function arguments, in this case this function takes file contents as a parameter and modified contents are returned.

Example with custom filter:

local filter  = require "make4ht-filter"
local changea = function(s) return s:gsub("a","z") end
local process = filter{"cleanspan", "fixligatures", changea}
Make:htlatex()
Make:match("html$",process)

In this example, spurious span elements are joined, ligatures are decomposed, and then all letters "a" are replaced with "z" letters.

Built-in filters are the following:

cleanspan

: clean spurious span elements when accented characters are used

cleanspan-nat

: alternative clean span filter, provided by Nat Kuhn

fixligatures

: decompose ligatures to base characters

hruletohr

: \hrule commands are translated to series of underscore characters by \TeX4ht, this filter translates these underscores to <hr> elements

entites

: convert prohibited named entities to numeric entities (only   currently).

fix-links

: replace colons in local links and id attributes with underscores. Some cross-reference commands may produce colons in internal links, which results in a validation error.

mathjaxnode

: (deprecated, use mjcli extension instead) Old information: use mathjax-node-page to convert from MathML code to HTML + CSS or SVG. See the available settings.

mjcli

: use mjcli to convert math in MathML or \LaTeX\ format to plain HTML + CSS. See the available settings.

odttemplate

: use styles from another ODT file serving as a template in the current document. It works for the styles.xml file in the ODT file. During the compilation, this file is named as \jobname.4oy. \label{sec:odttemplate}

staticsite

: create HTML files in a format suitable for static site generators such as Jekyll

svg-height

: some SVG images produced by dvisvgm seem to have wrong dimensions. This filter tries to set the correct image size.

DOM filters

DOM filters are variants of filters that use the LuaXML library to modify directly the XML object. This enables more powerful operations than the regex-based filters from the previous section.

Example:

local domfilter = require "make4ht-domfilter"
local process = domfilter {"joincharacters"}
Make:match("html$", process)

Available DOM filters:

aeneas

: Aeneas is a tool for automagical synchronization of text and audio. This filter modifies the HTML code to support synchronization.

booktabs

: fix lines produced by the \cmidrule command provided by the Booktabs package.

collapsetoc

: collapse table of contents to contain only top-level sectioning level and sections on the current page.

fixinlines

: put all inline elements which are direct children of the <body> elements to a paragraph.

idcolons

: replace the colon (:) character in internal links and id attributes. They cause validation issues.

inlinecss

: remove CSS rules that target elements with unique attributes, such as color boxes, table rules, or inline math pictures, and insert their properties as a inline style attribute in the HTML document.

joincharacters

: join consecutive <span> or <mn> elements. This DOM filter supersedes the cleanspan filter.

joincolors

: many <span> elements with unique id attributes are created when \LaTeX\ colors are being used in the document. A CSS rule is added for each of these elements, which may result in substantial growth of the CSS file. This filter replaces these rules with a common one for elements with the same color value. See also the inlinecss DOM filter and extension, which provides an alternative using inline styles.

odtfonts

: fix styles for fonts that were wrongly converted by Xtpipes in the ODT format.

odtimagesize

: set correct dimensions for images in the ODT format. It is no longer used, as the dimensions are set by TeX4ht itself.

odtpartable

: resolve tables nested inside paragraphs, which is invalid in the ODT format.

tablerows

: remove spurious rows from HTML tables.

mathmlfixes

: fix common issues for MathML.

sectionid

: create id attribute for HTML sectioning elements derived from the section title. It also updates links to these sections. Use the notoc command line option to prevent that.

t4htlinks

: fix hyperlinks in the ODT format.

Image conversion

\label{sec:imageconversion}

It is possible to convert parts of the \LaTeX\ input as pictures. It can be used for preserving the appearance of math or diagrams, for example.

These pictures are stored in a special DVI file, which can be processed by a DVI to image commands, such as dvipng or dvisvgm.

This conversion is normally configured in the tex4ht.env file. This file is system dependent and it has quite an unintuitive syntax. The configuration is processed by the t4ht application and the conversion command is called for all pictures.

It is possible to disable t4ht image processing and configure image conversion in the build file using the image action:

Make:image("png$",
"dvipng -bg Transparent -T tight -o ${output}  -pp ${page} ${source}")

Make:image takes two parameters, a Lua pattern to match the image name, and the action.

Action can be either a string template with the conversion command or a function that takes a table with parameters as an argument.

There are three parameters:

• output - output image filename
• source - DVI file with the pictures
• page - page number of the converted image

The mode variable

The mode variable available in the build process contains contents of the --mode command line option. It can be used to run some commands conditionally. For example:

 if mode == "draft" then
   Make:htlatex{} 
 else
   Make:htlatex{}
   Make:htlatex{}
   Make:htlatex{}
 end

In this example (which is the default configuration used by make4ht), \LaTeX\ is called only once when make4ht is called with the draft mode:

make4ht -m draft filename

The settings table

\label{sec:settings}

It is possible to access the parameters outside commands, file matches and image conversion functions. For example, to convert the document to the OpenDocument Format (ODT), the following settings can be used. They are based on the oolatex command:

settings.tex4ht_sty_par = settings.tex4ht_sty_par ..",ooffice"
settings.tex4ht_par = settings.tex4ht_par .. " ooffice/! -cmozhtf"
settings.t4ht_par = settings.t4ht_par .. " -cooxtpipes -coo "

(Note that it is possible to use the --format odt option which is superior to the previous code. This example is intended just as an illustration)

There are some functions to simplify access to the settings:

set_settings{parameters}

: overwrite settings with values from a passed table

settings_add{parameters}

: add values to the current settings

filter_settings "filter name" {parameters}

: set settings for a filter

get_filter_settings(name)

: get settings for a filter

For example, it is possible to simplify the sample from the previous code listings:

settings_add {
  tex4ht_sty_par =",ooffice",
  tex4ht_par = " ooffice/! -cmozhtf",
  t4ht_par = " -cooxtpipes -coo "
}

Settings for filters and extensions can be set using filter_settings:

filter_settings "test" {
  hello = "world"
}

These settings can be retrieved in the extensions and filters using the get_filter_settings function:

function test(input)
   local options = get_filter_settings("test")
   print(options.hello)
   return input
end

Default settings

The default parameters are the following:

htlatex

: used \TeX\ engine

input

: content of \jobname, see also the tex_file parameter.

interaction

: interaction mode for the \TeX\ engine. The default value is batchmode to suppress user input on compilation errors. It also suppresses most of the \TeX\ compilation log output. Use the errorstopmode for the default behavior.

tex_file

: input \TeX\ filename

latex_par

: command line parameters to the \TeX\ engine

packages

: additional \LaTeX\ code inserted before \documentclass. Useful for passing options to packages used in the document or to load additional packages.

tex4ht_sty_par

: options for tex4ht.sty

tex4ht_par

: command line options for the tex4ht command

t4ht_par

: command line options for the t4ht command

outdir

: the output directory

correct_exit

: expected exit code from the command. The compilation will be terminated if the exit code of the executed command has a different value.

make4ht configuration file {#configfile}

It is possible to globally modify the build settings using the configuration file. It is a special version of a build file where the global settings can be set.

Common tasks for the configuration file can be a declaration of the new commands, loading of the default filters or specification of a default build sequence.

One additional functionality not available in the build files are commands for enabling and disabling of extensions.

Location

The configuration file can be saved either in the $HOME/.config/make4ht/config.lua file, or in the .make4ht file placed in the current directory or it's parent directories (up to the $HOME directory).

Additional commands

There are two additional commands:

Make:enable_extension(name)

: require extension

Make:disable_extension(name)

: disable extension

Example

The following example of the configuration file adds support for the biber command, requires common_domfilters extension and requires MathML output for math.

Make:add("biber", "biber ${input}")
Make:enable_extension "common_domfilters"
settings_add {
  tex4ht_sty_par =",mathml"
}

List of available settings for filters and extensions.

These settings may be set using filter_settings function in a build file or in the make4ht configuration file.

Indexing commands

The indexing commands (like xindy or makeindex) use some common settings.

idxfile

: name of the .idx file. Default value is \jobname.idx.

indfile

: name of the .ind file. Default value is the same as idxfile with the file extension changed to .ind.

Each indexing command can have some additional settings.

The xindy command

encoding

: text encoding of the .idx file. Default value is utf8.

language

: index language. Default language is English.

modules

: table with names of additional Xindy modules to be used.

The makeindex command

options

: additional command line options for the Makeindex command.

The xindex command

options

: additional command line options for the Xindex command.

language

: document language

The tidy extension

options

: command line options for the tidy command. Default value is -m -utf8 -w 512 -q.

The collapsetoc dom filter

toc_query

: CSS selector for selection of element that contains the table of contents.

title_query

: CSS selector for selecting all elements that contain the section ID attribute.

toc_levels

: table containing a hierarchy of classes used in TOC

max_depth

: set detph of displayed children TOC levels

Default values:

filter_settings "collapsetoc" {
  toc_query = ".tableofcontents",
  title_query = "h1 a, h2 a, h3 a, h4 a, h5 a, h6 a",
  max_depth = 1,
  toc_levels = {
    tocpart = 1,
    toclikepart = 1,
    tocappendix = 1,
    toclikechapter = 2,
    tocchapter = 2,
    tocsection = 3,
    toclikesection = 3,
    tocsubsection = 4,
    toclikesubsection = 4,
    tocsubsubsection = 5,
    toclikesubsubsection = 5,
    tocparagraph = 6,
    toclikeparagraph = 6,
    tocsubparagraph = 7,
    toclikesubparagraph = 7,
  }
}

The copy_images extension

extensions

: table with list of image extensions that should be processed.

img_dir

: name of the output directory where images should be stored

Default values:

 filter_settings "copy_images" {
    extensions = {"png", "jpg", "jpeg", "svg"},
    img_dir = ""
 }

The fixinlines dom filter

inline_elements

: table of inline elements that shouldn't be direct descendants of the body element. The element names should be table keys, the values should be true.

Example

filter_settings "fixinlines" {inline_elements = {a = true, b = true}}

The joincharacters dom filter

charclasses

: table of elements that should be concatenated when two or more of such elements with the same value of the class attribute are placed one after another.

Example

filter_settings "joincharacters" { charclasses = { span=true, mn = true}}

The mjcli filter and extension {#mathjaxsettings}

mjcli detects whether to use MathML or \LaTeX\ input by use of the mathjax option for make4ht. By default, it uses MathML. \LaTeX\ input can be required using:

make4ht -f html5+mjcli filename.tex "mathjax"

Available settings

options

: command line options for the mjcli command.

Example

filter_settings "mjcli" {
  options="--svg"
}

cssfilename

: the mjcli command puts some CSS code into the HTML pages. The mjcli filter extracts this information and saves it to a standalone CSS file. Default name of this CSS file is ${input}-mathjax.css

fontdir

: directory with MathJax font files. This option enables the use of local fonts, which is useful in the conversion to ePub, for example. The font directory should be sub-directory of the current directory. Only \TeX\ font is supported at the moment.

Example

filter_settings "mjcli" {
  fontdir="fonts/TeX/woff/" 
}

The staticsite filter and extension

site_root

: directory where generated files should be copied.

map

: a hash table where keys contain patterns that match filenames and values contain destination directory for the matched files. The destination directories are relative to the site_root (it is possible to use .. to switch to a parent directory).

file_pattern

: a pattern used for filename generation. It is possible to use string templates and format strings for os.date function. The default pattern %Y-%m-%d-${input} creates names in the form of YYYY-MM-DD-file_name.

header

: table with variables to be set in the YAML header in HTML files. If the table value is a function, it is executed with current parameters and HTML page DOM object as arguments.

remove_maketitle

: the staticsite extension removes text produced by the \maketitle command by default. Set this option to false to disable the removal.

Example:

-- set the environmental variable 'blog_root' with path to 
-- the directory that should hold the generated HTML files
local outdir = os.getenv "blog_root" 

filter_settings "staticsite" {
  site_root = outdir, 
  map = {
    [".css$"] = "/css/"
  },
  header = {
     layout="post",
     date = function(parameters, dom)
       return os.date("!%Y-%m-%d %T", parameters.time)
     end
  }
}

The dvisvgm_hashes extension

options

: command line options for Dvisvgm. The default value is -n --exact -c 1.15,1.15.

cpu_cnt

: the number of processor cores used for the conversion. The extension tries to detect the available cores automatically by default.

parallel_size

: the number of pages used in each Dvisvgm call. The extension detects changed pages in the DVI file and constructs multiple calls to Dvisvgm with only changed pages.

scale

: SVG scaling.

The odttemplate filter and extension

template

: filename of the template ODT file

odttemplate can also get the template filename from the odttemplate option from tex4ht_sty_par parameter. It can be set using the following command line call:

 make4ht -f odt+odttemplate filename.tex "odttemplate=template.odt"

The aeneas filter

skip_elements

: List of CSS selectors that match elements that shouldn't be processed. Default value: { "math", "svg"}.

id_prefix

: prefix used in the ID attribute forming.

sentence_match

: Lua pattern used to match a sentence. Default value: "([^%.^%?^!]*)([%.%?!]?)".

The make4ht-aeneas-config package

Companion for the aeneas DOM filter is the make4ht-aeneas-config plugin. It can be used to write the Aeneas configuration file or execute Aeneas on the generated HTML files.

Available functions:

write_job(parameters)

: write Aenas job configuration to config.xml file. See the Aeneas documentation for more information about jobs.

execute(parameters)

: execute Aeneas.

process_files(parameters)

: process the audio and generated subtitle files.

By default, a SMIL file is created. It is assumed that there is an audio file in the mp3 format, named as the \TeX\ file. It is possible to use different formats and filenames using mapping.

The configuration options can be passed directly to the functions or set using filter_settings "aeneas-config" {parameters} function.

Available parameters

lang

: document language. It is interfered from the HTML file, so it is not necessary to set it.

map

: mapping between HTML, audio and subtitle files. More info below.

text_type

: type of input. The aeneas DOM filter produces an unparsed text type.

id_sort

: sorting of id attributes. The default value is numeric.

id_regex

: regular expression to parse the id attributes.

sub_format

: generated subtitle format. The default value is smil.

Additional parameters for the job configuration file

• description
• prefix
• config_name
• keep_config

It is possible to generate multiple HTML files from the \LaTeX\ source. For example, tex4ebook generates a separate file for each chapter or section. It is possible to set options for each HTML file, in particular names of the corresponding audio files. This mapping is done using the map parameter.

Example:

filter_settings "aeneas-config" {
  map = {
    ["sampleli1.html"] = {audio_file="sample.mp3"}, 
    ["sample.html"] = false
  }
}

Table keys are the configured filenames. It is necessary to insert them as ["filename.html"], because of Lua syntax rules.

This example maps audio file sample.mp3 to a section subpage. The main HTML file, which may contain title and table of contents doesn't have a corresponding audio file.

Filenames of the subfiles correspond to the chapter numbers, so they are not stable when a new chapter is added. It is possible to request filenames derived from the chapter titles using the sec-filename option for tex4ht.sty.

Available map options

audio_file

: the corresponding audio file

sub_file

: name of the generated subtitle file

The following options are the same as their counterparts from the main parameters table and generally, don't need to be set:

• prefix
• file_desc
• file_id
• text_type
• id_sort
• id_prefix
• sub_format

Full example

local domfilter = require "make4ht-domfilter"
local aeneas_config = require "make4ht-aeneas-config"

filter_settings "aeneas-config" {
  map = {
    ["krecekli1.xhtml"] = {audio_file="krecek.mp3"}, 
    ["krecek.xhtml"] = false
  }
}

local process = domfilter {"aeneas"}
Make:match("html$", process)

if mode == "draft" then
  aeneas_config.process_files {}
else
  aeneas_config.execute {}
end

Troubleshooting

Incorrect handling of command line arguments for tex4ht, t4ht or latex

Sometimes, you may get a similar error:

make4ht:unrecognized parameter: i

It may be caused by a following make4ht invocation:

$ make4ht hello.tex "customcfg,charset=utf-8" "-cunihtf -utf8" -d foo

The command line option parser is confused by mixing options for make4ht and \TeX4ht\ in this case. It tries to interpret the -cunihtf -utf8, which are options for the tex4ht command, as make4ht options. To fix that, try to move the -d foo directly after the make4ht command:

$ make4ht -d foo hello.tex "customcfg,charset=utf-8" "-cunihtf -utf8"

Another option is to add a space before the tex4ht options:

$ make4ht hello.tex "customcfg,charset=utf-8" " -cunihtf -utf8" -d foo

The former way is preferable, though.

Table of Contents points to a wrong destination

The sectionid DOM filter creates better link destinations for sectioning commands. In some cases, for example if you use Pandoc, the document may already contain the link destination with the same name. In such cases the original destination is preserved in the file. In this case links to the section will point to that place, instead of correct destination in the section. This may happen for example if you use Pandoc for the Markdown to \LaTeX\ conversion. It creates \hypertarget commands that are placed just before section. The links points to that place, instead of the actual section.

In this case you don't want to update links. Use the notoc option to prevent that.

Filenames containing spaces

tex4ht command cannot handle filenames containing spaces. to fix this issue, make4ht replaces spaces in the input filenames with underscores. The generated XML filenames use underscores instead of spaces as well.

Filenames containing non-ASCII characters

The odt output doesn't support accented filenames, it is best to stick to ASCII characters in filenames.

License

Permission is granted to copy, distribute and/or modify this software under the terms of the LaTeX Project Public License, version 1.3.