Tabspaces
Tabspaces leverages tab-bar.el and project.el (both built into emacs 27+) to create buffer-isolated workspaces (or โtabspacesโ) that also integrate with your version-controlled projects. It should work with emacs 27+. It is tested to work with a single frame workflow, but should work with multiple frames as well.
While other great packages exist for managing workspaces, such as bufler, perspective and persp-mode, this package is less complex than those alternatives, and works entirely based on the built-in (to emacs 27+) tab-bar and project packages. If you like simple, this may be the workspace package for you. That said, bufler, perspective or persp-mode, etc. may better fit your needs.
NOTE: version 1.2 renames several functions and streamlines tab and project creation. Apologies if this breaks your workflow. Please update your configuration accordingly.
Basic Usage
Calling the minor-mode tabspaces-mode sets up newly created tabs as
buffer-isolated workspaces using tab.el in the background. Calling
tabspaces-mode does not itself create a new tabbed workspace.
Switch or create workspace via tabspaces-switch-or-create-workspace. Close a
workspace by invoking tabspaces-close-workspace. Note that these two functions
are simply wrappers around native tab-bar commands. You can close a workspace
and kill all buffers associated with it using
tabspaces-kill-buffers-close-workspace.
Open an existing version-controlled project in its own workspace using
tabspaces-open-or-create-project-and-workspace. If no such project exists it
will then create one in its own workspace for you.
See workspace buffers using tabspaces-switch-buffer (for consult integration see
below), which will only show buffers in the workspace (but list-buffers,
ibuffer, etc. will show all buffers). Setting
tabspaces-use-filtered-buffers-as-default to t remaps switch-to-buffer to
tabspaces-switch-to-buffer.
Adding buffers to a workspace is as simple as opening the buffer in
the workspace. Delete buffers from a workspace either by killing them or using
one of either tabspaces-remove-selected-buffer or
tabspaces-remove-current-buffer. Removed buffers are still available from the
default tabspace unless the variable tabspaces-remove-to-default is set to nil.
NOTE that other than tabbed buffer isolation for all created window tabs this
package does not modify tab-bar, tab-line, or project in any way. It simply adds
convenience functions for use with those packages. So it is still up to the user
to configure tabs, etc., however they like.
Here are some screenshots of tabspaces (with my lambda-themes) and using consult-buffer (see below for instructions on that setup). You can see the workspace isolated buffers in each and the tabs at top:
Installation
You may install this package either from Melpa (M-x package-install tabspaces
RET) or by cloning this repo and adding it to your load-path.
Setup
Hereโs one possible way of setting up the package using use-package (and straight, if you use that).
(use-package tabspaces
;; use this next line only if you also use straight, otherwise ignore it.
:straight (:type git :host github :repo "mclear-tools/tabspaces")
:hook (after-init . tabspaces-mode) ;; use this only if you want the minor-mode loaded at startup.
:commands (tabspaces-switch-or-create-workspace
tabspaces-open-or-create-project-and-workspace)
:custom
(tabspaces-use-filtered-buffers-as-default t)
(tabspaces-default-tab "Default")
(tabspaces-remove-to-default t)
(tabspaces-include-buffers '("*scratch*"))
;; sessions
(tabspaces-session t)
(tabspaces-session-auto-restore t))
Keybindings
Workspace Keybindings are defined in the following variable:
(defvar tabspaces-command-map
(let ((map (make-sparse-keymap)))
(define-key map (kbd "C") 'tabspaces-clear-buffers)
(define-key map (kbd "b") 'tabspaces-switch-to-buffer)
(define-key map (kbd "d") 'tabspaces-close-workspace)
(define-key map (kbd "k") 'tabspaces-kill-buffers-close-workspace)
(define-key map (kbd "o") 'tabspaces-open-or-create-project-and-workspace)
(define-key map (kbd "r") 'tabspaces-remove-current-buffer)
(define-key map (kbd "R") 'tabspaces-remove-selected-buffer)
(define-key map (kbd "s") 'tabspaces-switch-or-create-workspace)
(define-key map (kbd "t") 'tabspaces-switch-buffer-and-tab)
map)
"Keymap for tabspace/workspace commands after `tabspaces-keymap-prefix'.")The variable tabspaces-keymap-prefix sets a key prefix (default is C-c TAB) for
the keymap, but this can be changed to anything the user prefers.
Buffer Filtering
When tabspaces-mode is enabled use tabspaces-switch-to-buffer to choose from a
filtered list of only those buffers in the current tab/workspace. Though nil by
default, when tabspaces-use-filtered-buffers-as-default is set to t and
tabspaces-mode is enabled, switch-to-buffer is globally remapped to
tabspaces-switch-to-buffer, and thus only shows those buffers in the current
workspace. For use with consult-buffer, see below.
Switch Tabs via Buffer
Sometimes the user may wish to switch to some open buffer in a tabspace and switch to that tab as well. Use (=tabspaces-switch-buffer-and-tab) to achieve this. If the buffer is open in more than one tabspace the user will be prompted to choose which tab to switch to. If there is no such buffer user will be prompted on whether to create it in a new tabspace or the current one.
Persistent Tabspaces
Rudimentary support for saving tabspaces across sessions has been implemented.
Setting tabspaces-session to t ensures that all open tabspaces and file-visiting
buffers are saved. These may either be restored interactively via
(tabspaces-restore-session), non-interactively via
(tabspaces--restore-session-on-startup), or they can be automatically opened
when (tabspaces-mode) is activated if tabspaces-session-auto-restore is set to
t. In addition, a particular project tabspace may be saved via
(tabspaces-save-current-project-session), and restored when the project is opened via (tabspaces-open-or-create-project-and-workspace).
Additional Customization
Consult
If you have consult installed you might want to implement the following in your
config to have workspace buffers in consult-buffer:
;; Filter Buffers for Consult-Buffer
(with-eval-after-load 'consult
;; hide full buffer list (still available with "b" prefix)
(consult-customize consult--source-buffer :hidden t :default nil)
;; set consult-workspace buffer list
(defvar consult--source-workspace
(list :name "Workspace Buffers"
:narrow ?w
:history 'buffer-name-history
:category 'buffer
:state #'consult--buffer-state
:default t
:items (lambda () (consult--buffer-query
:predicate #'tabspaces--local-buffer-p
:sort 'visibility
:as #'buffer-name)))
"Set workspace buffer list for consult-buffer.")
(add-to-list 'consult-buffer-sources 'consult--source-workspace))This should seamlessly integrate workspace buffers into consult-buffer,
displaying workspace buffers by default and all buffers when narrowing using
โbโ. Note that you can also see all project related buffers and files just by
narrowing with โpโ in a default consult setup.
NOTE: If you typically toggle between having tabspaces-mode active and inactive,
you may want to also include a hook function to turn off the
consult--source-workspace above and modify the visibility of
consult--source-buffer. You can do that with something like the following:
(defun my--consult-tabspaces ()
"Deactivate isolated buffers when not using tabspaces."
(require 'consult)
(cond (tabspaces-mode
;; hide full buffer list (still available with "b")
(consult-customize consult--source-buffer :hidden t :default nil)
(add-to-list 'consult-buffer-sources 'consult--source-workspace))
(t
;; reset consult-buffer to show all buffers
(consult-customize consult--source-buffer :hidden nil :default t)
(setq consult-buffer-sources (remove #'consult--source-workspace consult-buffer-sources)))))
(add-hook 'tabspaces-mode-hook #'my--consult-tabspaces) Ivy
If you use ivy you can use this function to limit your buffer search to only those in the tabspace.
(defun tabspaces-ivy-switch-buffer (buffer)
"Display the local buffer BUFFER in the selected window.
This is the frame/tab-local equivilant to `switch-to-buffer'."
(interactive
(list
(let ((blst (mapcar #'buffer-name (tabspaces-buffer-list))))
(read-buffer
"Switch to local buffer: " blst nil
(lambda (b) (member (if (stringp b) b (car b)) blst))))))
(ivy-switch-buffer buffer))Included Buffers
By default the *scratch* buffer is included in all workspaces. You can modify
which buffers are included by default by changing the value of
tabspaces-include-buffers.
If you want emacs to startup with a set of initial buffers in a workspace (something I find works well) you could do something like the following:
(defun my--tabspace-setup ()
"Set up tabspace at startup."
;; Add *Messages* and *splash* to Tab \`Home\'
(tabspaces-mode 1)
(progn
(tab-bar-rename-tab "Home")
(when (get-buffer "*Messages*")
(set-frame-parameter nil
'buffer-list
(cons (get-buffer "*Messages*")
(frame-parameter nil 'buffer-list))))
(when (get-buffer "*splash*")
(set-frame-parameter nil
'buffer-list
(cons (get-buffer "*splash*")
(frame-parameter nil 'buffer-list))))))
(add-hook 'after-init-hook #'my--tabspace-setup)Acknowledgments
Code for this package is derived from, or inspired by, a variety of sources. These include:
- The original buffer filter function
- Buffer filtering and removal
- Consult integration