Those are false-positives. As you know, wtrace source code is open, and all the officially released binaries are built using GitHub Actions (you may check the workflow in the release.yml file). If your antivirus thinks that wtrace is malware, calculate the binary checksum, and if it matches the one on the release page, please report it as false-positive. Thank you!
Table of contents:
Wtrace [spelled: wɪtreɪs] is a command-line tool for recording trace events from the Operating System or a group of processes. Wtrace may collect, among others, File I/O and Registry operations, TPC/IP connections, and RPC calls. Its purpose is to give you some insights into what is happening in the system.
Additionally, it has various filtering capabilities and may also dump statistics at the end of the trace session. As it's just a standard command-line tool, you may pipe its output to another tool for further processing.
The available options are listed below:
Usage: wtrace [OPTIONS] [pid|imagename args]
Options:
-f, --filter=FILTER Displays only events which satisfy a given FILTER.
(Does not impact the summary)
--handlers=HANDLERS Displays only events coming from the specified HANDLERS.
-c, --children Collects traces from the selected process and all its
children.
--newconsole Starts the process in a new console window.
-s, --system Collect only system statistics (Processes and DPC/ISR)
- shown in the summary.
--nosummary Prints only ETW events - no summary at the end.
-v, --verbose Shows wtrace diagnostics logs.
-h, --help Shows this message and exits.
The HANDLERS parameter is a list of handler names, separated with a comma.
Accepted handlers include:
process - only Process/Thread events (this handler is always enabled)
file - File I/O events
registry - Registry events (voluminous, disabled by default)
rpc - RPC events (enable image handler to allow RPC method name resolution)
tcp - TCP/IP events
udp - UDP events
image - image (module) events (load/unload)
Example: --handlers 'tcp,file,registry'
Each FILTER is built from a keyword, an operator, and a value. You may
define multiple events (filters with the same keywords are OR-ed).
Keywords include:
pid - filtering on the proces ID
pname - filtering on on the process name
name - filtering on the event name
level - filtering on the event level (1 [critical] - 5 [debug])
path - filtering on the event path
details - filtering on the event details
Operators include:
=, <> (does not equal), <= (ends with), >= (starts with), ~ (contains)
Example: -f 'pid = 1234', -f 'name ~ FileIO', -f 'level <= 4'
Wtrace works on Windows 8.1+ and requires .NET 4.8.x. It is a single file application, and you may download the latest version from the release page.
Alternatively, you may install wtrace using Chocolatey:
choco install wtrace
Wtrace may trace drivers, all processes in the system, or only a specific process with its children.
The -s option (system-only) is a special mode in which wtrace collects statistics of the ISR/DPC and process events. It later dumps them at the end of the trace session. It will also show the tree of processes running during the session.
To trace all processes (system-wide), run wtrace with no arguments. Tracing system-wide produces lots of events, and if no filtering is applied, there is a risk that wtrace will lose some events. Therefore, I highly recommend setting event filters or limit the number of handles in the system-wide sessions. If you want to trace the system for a longer time, consider adding the –no-summary option. This option will turn off the statistics, keeping wtrace memory usage minimum.
# show File write events from all the processes
wtrace --handlers file -f ‘eventname=FileIO/Write’
# show RPC events from all the processes
wtrace --handlers rpc
Wtrace can either trace a running process or start and trace a new process. In both scenarios, adding the -c/--children option makes wtrace also trace the processes launched by the target process, including their future children.
If the first command-line argument is a number, wtrace assumes that it's a process ID that it should start tracing:
# Trace File I/O operations of the process with id 1234 and its children
wtrace -f “name >= FileIO/” -c 1234
If the command-line argument is not a number, wtrace tries to start the process with arguments that follow the executable path.
# Start and trace the opening of the test.txt file by notepad.exe
wtrace notepad c:\temp\test.txt
We may define an event filter with the -f/--filter option. The filter is built from a keyword, an operator, and a value. The keyword represents an event field and must be one of the following values:
- pid - the process ID (useful in system-wide tracing)
- pname - the process name
- name - the event name
- level - the event level (debug [5], info [4], warning [3], error [2], critical [1])
- path - the event path
- details - the event details
The operators are the same for numeric and text values and include: =, <>, <=, >=, ~. For numbers, the ~ operator has the same effect as the = operator. For text fields, the >= operator returns true if the field value starts with a given text value. Consequently, the <= operator returns true if the field value ends with a given text value. The ~ operator returns true if the field value contains a given text value. The text filters are case-insensitive.
The value part of the filter string is everything that comes after the operator sign, except for white spaces at the beginning and the end of the text value. Therefore, you don't need to use any apostrophes inside the filter text unless you want them to be a part of the text value.
You may define multiple filters for a trace session. Wtrace combines them similarly to Process Monitor, so filters with the same keyword are OR-ed together (disjunction). Filters which keywords differ are AND-ed together (conjunction). At the start, wtrace will print the parsed filters so you can verify if it's what you expected. Event filters do not affect statistics. If the statistics collection is on (you haven't used the --nosummary flag), you will see the statistics at the end of the session for all the enabled handlers' events (check the Event Handlers section to learn more)
# Trace system-wide and filter events for processes which name
# is either notepad or notepad2 and the path starts with "d:\temp"
wtrace -f “pname = notepad” -f “pname = notepad2” -f “path >= d:\temp”
# Trace a process with id 12572 and its children and show only TCP/IP events
wtrace -f "name >= tcp" -c 12572
Apart from defining filters, we may also specify which handlers wtrace should enable in the session. Handlers are the components responsible for collecting and parsing trace events. Each handler handles a unique set of events. If we disable a handler, none of its events will appear in the live trace output. The statistics built from the handler's events will also be missing. The following handlers are available:
- process - for collecting process and thread lifetime events
- file - for collecting File I/O events
- registry - for collecting Windows Registry events (careful, > 1000 events / s)
- rpc - for collecting RPC events
- tcp - for collecting TCP/IP events
- udp - for collecting UDP events
- image - for collecting module load/unload events (this handler is required for RPC endpoint parsing)
By default, wtrace enables process, image, file, rpc,tcp, and udp handlers for a trace session. Even when tracing system-wide, this set of handlers should not be too voluminous and should not overload the console output. However, if you enable, for example, the registry handler, the number of events might quickly make the console window unusable. Therefore, it's essential to choose the right set of handlers for a session and apply filters, if only possible.
# Trace only registry and tcp events system-wide
wtrace --handlers registry,tcp
Wtrace displays the endpoint name, the interface ID, and the procedure index, for example:
14:14:53.3295 firefox (12572.21620) RPC/ClientCallEnd 'fb8a0729-2d04-4658-be93-27b4ad553fac (lsapolicylookup) [5]' -> SUCCESS
Thanks to the NtApiDotNet library, wtrace may resolve RPC procedure names in the summary view. To make it work, make sure the image handler is enabled and you have symbols configured for the wtrace session. If you have the _NT_SYMBOL_PATH environment variable set (I highly recommend configuring it), wtrace will use it. Otherwise, you need to set debugging symbols path through the --symbols parameter, for example:
wtrace.exe --symbols="SRV*C:\symbols\*https://msdl.microsoft.com/download/symbols" -v notepad.exe
If RPC procedure name resolution worked, you should see a procedure name in the curly braces, next to the procedure number:
--------------------------------
RPC (client calls)
--------------------------------
fb8a0729-2d04-4658-be93-27b4ad553fac (ncalrpc:[lsapolicylookup]) [5]{LsaLookuprGetDomainInfo} calls: 2
This warning may indicate a problem with ETW session handling. If it happens, the wtrace ETW session might still be running in your system. You may stop it using the logman tool:
logman stop wtrace-rt -ets
This warning usually indicates that the number of events was too high, and wtrace could not process them. In such a case, add some additional filters to the command line or disable the unneeded handlers.
If you find an error in wtrace, please report it on GitHub, providing the error message and steps to reproduce the problem. Thank you!
I would like to thank the authors of the TraceEvent and NtApiDotNet libraries. Wtrace would not exist without those libraries.