ipv666

NOTE - This software was previously licensed under GPLv3 and has since been updated to BSD.

ipv666 is a set of tools that enables the discovery of IPv6 addresses both in the global IPv6 address space and in more narrow IPv6 network ranges. These tools are designed to work out of the box with minimal knowledge of their workings.

As of v0.4 we have provided functionality into the tool set wherein you can choose to share any addresses you discover with us. All results uploaded by all parties can be queried on our website. The web site is bare bones right now but we have lots of plans for improvements!

The tools included in this codebase are as follows:

scan discover - Locates live hosts over IPv6 using statistical modeling and ICMP ping scans
scan alias - Tests a single IPv6 network range to see if the network range is aliased
generate addresses - Generate IPv6 addresses based on the content of a probabilistic clustering model
generate model - Generate a probabilistic clustering model based off an input set of IPv6 addresses
generate blacklist - Adds the contents of a file containing IPv6 network ranges to the aliased network blacklist
clean - Cleans the contents of a file containing IPv6 addresses based on an aliased network blacklist
convert - Converts the contents of a file containing IPv6 addresses to another IP address representation

Unless you're doing more complicated IPv6 research it is likely that the scan discover tool is what you're looking for.

To get started check out the Installation section first and then head to whichever section details the tool you're looking to use.

This software is brought to you free of charge by @_lavalamp and @marcnewlin, and we hope that you find it useful. If you do find it useful and you'd like to support our continued contributions to the codebase, please consider donating via any of the following:

PayPal - paypal.me/thelavalamp
BTC - 371FzLrE7dzd3cZNjDytSyV5hDhDpLj1Mr
ETH - 0x2A35C6987a7E2515EEdB8fB43a7FA86a9Ea917f4
LTC - MGkiBazpfs17ek7DuVJKwzwcFjVcmwrXur

Installation

As of v0.2 ipv666 should be much easier to install!

First you'll need to have the Golang environment installed. As ipv666 makes use of Go modules we recommend using Golang v1.11 and above to ensure a working installation.

Once you have Golang v1.11 or above installed, do the following:

go get github.com/lavalamp-/ipv666/ipv666

Once this command completes you should have the ipv666 binary on your path. If you don't, double check to make sure that $GOPATH/bin is in your PATH.

NOTE - This software is only intended to be run on Linux-based operating systems. Support for other operating systems is not presently planned.

NOTE - As of v0.4 we have built in the ability for users of ipv666 to upload the addresses they discover to our central service. You will be prompted on first use as to whether or not you would like to provide data to us. The addresses that are uploaded in this manner are made queryable on our IPv666 web site. If you choose not to upload your discovered addresses, no worries! We will ask for your approval again once every seven days, just in case you change your mind.

scan discover

The scan discover tool is the main workhorse of this toolset. It uses some fairly complicated statistical modeling, analysis, and blacklisting to predict legitimate IPv6 addresses and scan for their presence. More details on how exactly this tool works can be found in this blog post.

Please note that any networks that you scan with this tool will receive a considerable amount of traffic for a significant variety of IPv6 addresses. In some cases the networking infrastructure that is carrying your traffic will be unhappy and may either fall over and/or block you. We recommend exercising caution when using this tool (especially for targeted network scans) and choosing a bandwidth value with care (default is currently 20 Mbps).

Usage

This utility scans for live hosts over IPv6 based on the network range you specify. If no range is 
specified, then this utility scans the global IPv6 address space (e.g. 2000::/4). The scanning process 
generates candidate addresses, scans for them, tests the network ranges where live addresses are found 
for aliased conditions, and adds legitimate discovered IPv6 addresses to an output list.

Usage:
  ipv666 scan discover [flags]

Flags:
  -h, --help                 help for discover
  -o, --output string        The path to the file where discovered addresses should be written.
  -t, --output-type string   The type of output to write to the output file (txt or bin).

Global Flags:
  -b, --bandwidth string   The maximum bandwidth to use for ping scanning
  -f, --force              Whether or not to force accept all prompts (useful for daemonized scanning).
  -l, --log string         The log level to emit logs at (one of debug, info, success, warn, error).
  -n, --network string     The IPv6 CIDR range to scan.

Examples

Scan the global address space for live hosts over IPv6 with a maximum speed of 20 Mbps and write the results to a file entitled discovered_addrs.txt:

ipv666 scan discover

Scan the network 2600:6000::/32 for live hosts over IPv6 with a maximum speed of 10 Mbps and write the results to a file entitled addresses.txt:

ipv666 scan discover -b 10M -o addresses.txt -n 2600:6000::/32

scan alias

The scan alias tool will test a target network to see if it exhibits traits of being an aliased network (ie: all addresses in the range respond to ICMP pings). If the target network is aliased it will perform a binary search to find the exact network length for how large the aliased network is.

Usage

A utility for testing whether or not a network range exhibits traits of an aliased network range. 
Aliased network ranges are ranges in which every host responds to a ping request, thereby making it 
look like the range is full of IPv6 hosts. Pointing this utility at a network range will let tell you 
whether or not that network range is aliased and, if it is, the boundary of the network range that is 
aliased.

Usage:
  ipv666 scan alias [flags]

Flags:
  -h, --help   help for alias

Global Flags:
  -b, --bandwidth string   The maximum bandwidth to use for ping scanning
  -f, --force              Whether or not to force accept all prompts (useful for daemonized scanning).
  -l, --log string         The log level to emit logs at (one of debug, info, success, warn, error).
  -n, --network string     The IPv6 CIDR range to scan.

Examples

Test the network range 2600:9000:2173:6d50:5dca:2d48::/96 to see if it's aliased with a maximum speed of 20 Mbps:

ipv666 scan alias -n 2600:9000:2173:6d50:5dca:2d48::/96

Test the network range 2600:9000:2173:6d50:5dca:2d48::/96 to see ifit's aliased with maximum speed of 10 Mbps and show debug logging:

ipv666 scan alias -n 2600:9000:2173:6d50:5dca:2d48::/96 -b 10M -l debug

generate addresses

The generate addresses tool uses a predictive clustering model to generate a set number of IPv6 addresses. The addresses are subsequently written to a specified file.

Usage

This utility will generate IPv6 addresses in target network range (or in the global address 
space) based on the default included cluster model or a cluster model that you specify.

Usage:
  ipv666 generate addresses [flags]

Flags:
  -c, --count int        The number of IP addresses to generate. (default 1000000)
  -h, --help             help for addresses
  -m, --model string     Local file path to the model to generate addresses from (if empty, 
                         uses the default model packaged with ipv666).
  -n, --network string   The address range to generate addresses within (if empty, generates 
                         addresses in the global address space of ::/0).
  -o, --out string       File path to where the generated IP addresses should be written.

Global Flags:
  -f, --force        Whether or not to force accept all prompts (useful for daemonized scanning).
  -l, --log string   The log level to emit logs at (one of debug, info, success, warn, error).

Examples

Generate 1,000,000 addresses in the global address space based on the default clustering model packaged with ipv666 and write the results to a file at /tmp/output:

ipv666 generate addresses -o /tmp/output

Generate 500,000 addresses in the network 2600::/4 based on the model contained in the file at /tmp/model and write the results to a file at /tmp/output:

ipv666 generate addresses -c 500000 -n 2600::/4 -m /tmp/model -o /tmp/output

generate model

The generate model tool creates a new predictive clustering model based on a list of known IPv6 addresses.

Usage

This utility will generate a predictive clustering model based on the contents of
an IPv6 address file.

Usage:
  ipv666 generate model [flags]

Flags:
  -h, --help           help for model
  -i, --input string   An input file containing IPv6 addresses to use for the model.
  -o, --out string     The file path to write the resulting model to.

Global Flags:
  -f, --force        Whether or not to force accept all prompts (useful for daemonized scanning).
  -l, --log string   The log level to emit logs at (one of debug, info, success, warn, error).

Examples

Generate a new clustering model based on the IP addresses in the file /tmp/addresses and write the resulting model to the file /tmp/model:

ipv666 generate model -i /tmp/addresses -o /tmp/model

generate blacklist

The generate blacklist tool processes the content of a file containing IPv6 CIDR ranges (new-line delimited) and adds all of the network ranges to either (1) a new blacklist or (2) your existing blacklist. These blacklists are automatically located and loaded from specific file paths during the operation of discover, alias, and clean.

You will be prompted after invocation asking whether you'd like to create a new blacklist or add these new networks to your existing blacklist.

Usage

This utility takes a list of IPv6 CIDR ranges from a text file (new-line delimited),
adds them to the current network blacklist, and sets the new blacklist as the one to use
for the 'scan' command.

Usage:
  ipv666 generate blacklist [flags]

Flags:
  -h, --help           help for blacklist
  -i, --input string   An input file containing IPv6 network ranges to build a blacklist from.

Global Flags:
  -f, --force        Whether or not to force accept all prompts (useful for daemonized scanning).
  -l, --log string   The log level to emit logs at (one of debug, info, success, warn, error).

Examples

Add the IPv6 CIDR ranges found in the file /tmp/addrranges to a blacklist:

ipv666 generate blacklist -i /tmp/addrranges

Add the IPv6 CIDR ranges found in the file /tmp/addrranges to a blacklist and force accept all prompts:

ipv666 generate blacklist -i /tmp/addrranges -f

clean

The clean tool processes the content of a file containing IPv6 addresses (new-line delimited), removes all the addresses that are found within blacklisted networks, and writes the results to an output file. This tool is an easy way to remove addresses in aliased network ranges from a set of IP addresses.

Usage

This utility will clean the contents of an IPv6 address file (new-line delimited, standard ASCII hex 
representation) based on the contents of an IPv6 network blacklist file. If no blacklist path is 
supplied then the utility will use the default blacklist. The cleaned results will then be written to 
an output file.

Usage:
  ipv666 clean [flags]

Flags:
  -b, --blacklist string   The local file path to the blacklist to use. If not specified, defaults to 
                           the most recent blacklist in the configured blacklist directory.
  -h, --help               help for clean
  -i, --input string       An input file containing IPv6 addresses to clean via a blacklist.
  -o, --out string         The file path where the cleaned results should be written to.

Global Flags:
  -f, --force        Whether or not to force accept all prompts (useful for daemonized scanning).
  -l, --log string   The log level to emit logs at (one of debug, info, success, warn, error).

Examples

Process the IPv6 addresses in the file /tmp/addresses, remove all addresses found in the most up-to-date blacklist found in the default file path, and write the results to /tmp/cleanedaddrs):

ipv666 clean -i /tmp/addresses -o /tmp/cleanedaddrs

Process the IPv6 addresses in the file /tmp/addresses, remove all addresses found in the blacklist at /tmp/blacklist, and write the results to /tmp/cleanedaddrs):

ipv666 clean -i /tmp/addresses -o /tmp/cleanedaddrs -b /tmp/blacklist

convert

The convert tool is useful for converting a file containing IPv6 addresses to different file formats. It currently supports the three different output types of txt (standard ASCII hex IPv6 addresses), bin (the raw 16 bytes of all input addresses are written sequentially to a file) and hex (the full 32 character ASCII hex representation is written to a file delimited by new lines).

Usage

This utility will process the contents of a file as containing IPv6 addresses, convert those addresses 
to another format, and then write a new file with the same addresses in the new format. This 
functionality is (hopefully) intelligent enough to determine how the addresses are stored in the file 
without having to specify an input type.

Usage:
  ipv666 convert [flags]

Flags:
  -h, --help           help for convert
  -i, --input string   The file to process IPv6 addresses out of.
  -o, --out string     The file path to write the converted file to.
  -t, --type string    The format to write the IPv6 addresses in (one of 'txt', 'bin', 'hex').

Global Flags:
  -f, --force        Whether or not to force accept all prompts (useful for daemonized scanning).
  -l, --log string   The log level to emit logs at (one of debug, info, success, warn, error).

Examples

Convert the contents of the file at /tmp/addresses (in standard text format) to binary format and write the results to /tmp/out:

ipv666 convert -i /tmp/addresses -o /tmp/out -t bin

Convert the contents of the file at /tmp/addresses (in binary format) to fat hex format and write the results to /tmp/out:

ipv666 convert -i /tmp/addresses -o /tmp/out -t hex

References

We've given a few talks on ipv666 and a few folks have had kind words to say about it. Here's a running list:

License

This software is licensed via the GNU General Public License v3.0.

We invite people to contribute to the codebase, fork it, do whatever you'd like! The only requirement that we have with this license is that derivative work is similarly open sourced.

Thanks

Many thanks to the following people for their contributions, inspiration, and help.

Vasyl Pihur
Zakir Durumeric
David Adrian
Eric Wustrow
J. Alex Halderman
Paul Pearce
Ariana Mirian
HD Moore
Oliver Gasser
Quirin Scheitle
Tobias Fiebig
Matthew Bryant

lavalamp-/ipv666

lavalamp-

Reviews

Repository Details

ipv666

Installation

scan discover

Usage

Examples

scan alias

Usage

Examples

generate addresses

Usage

Examples

generate model

Usage

Examples

generate blacklist

Usage

Examples

clean

Usage

Examples

convert

Usage

Examples

References

License

Thanks

More Repositories