Rust port of github's cmark-gfm. Currently synced with release 0.29.0.gfm.13.

• Installation
• Usage
• Security
• Extensions
• Related projects
• Contributing
• Legal

Specify it as a requirement in Cargo.toml:

[dependencies]
comrak = "0.22"

Comrak's library supports Rust 1.62.1+.

curl https://webinstall.dev/comrak | bash

curl.exe -A "MS" https://webinstall.dev/comrak | powershell

$ comrak --help
A 100% CommonMark-compatible GitHub Flavored Markdown parser and formatter

Usage: comrak [OPTIONS] [FILE]...

Arguments:
  [FILE]...
          CommonMark file(s) to parse; or standard input if none passed

Options:
  -c, --config-file <PATH>
          Path to config file containing command-line arguments, or 'none'
          
          [default: /Users/kivikakk/.config/comrak/config]

  -i, --inplace
          To perform an in-place formatting

      --hardbreaks
          Treat newlines as hard line breaks

      --smart
          Use smart punctuation

      --github-pre-lang
          Use GitHub-style <pre lang> for code blocks

      --full-info-string
          Enable full info strings for code blocks

      --gfm
          Enable GitHub-flavored markdown extensions: strikethrough, tagfilter, table, autolink, and
          tasklist. Also enables --github-pre-lang

      --relaxed-tasklist-character
          Enable relaxing which character is allowed in a tasklists

      --relaxed-autolinks
          Enable relaxing of autolink parsing, allowing links to be recognized when in brackets

      --default-info-string <INFO>
          Default value for fenced code block's info strings if none is given

      --unsafe
          Allow raw HTML and dangerous URLs

      --gemojis
          Translate gemojis into UTF-8 characters

      --escape
          Escape raw HTML instead of clobbering it

      --escaped-char-spans
          Wrap escaped characters in span tags

  -e, --extension <EXTENSION>
          Specify extension name(s) to use
          
          Multiple extensions can be delimited with ",", e.g. --extension strikethrough,table
          
          [possible values: strikethrough, tagfilter, table, autolink, tasklist, superscript,
          footnotes, description-lists, multiline-block-quotes, math-dollars, math-code]

  -t, --to <FORMAT>
          Specify output format
          
          [default: html]
          [possible values: html, xml, commonmark]

  -o, --output <FILE>
          Write output to FILE instead of stdout

      --width <WIDTH>
          Specify wrap width (0 = nowrap)
          
          [default: 0]

      --header-ids <PREFIX>
          Use the Comrak header IDs extension, with the given ID prefix

      --front-matter-delimiter <DELIMITER>
          Ignore front-matter that starts and ends with the given string

      --syntax-highlighting <THEME>
          Syntax highlighting for codefence blocks. Choose a theme or 'none' for disabling
          
          [default: base16-ocean.dark]

      --list-style <LIST_STYLE>
          Specify bullet character for lists (-, +, *) in CommonMark output
          
          [default: dash]
          [possible values: dash, plus, star]

      --sourcepos
          Include source position attribute in HTML and XML output

  -h, --help
          Print help information (use `-h` for a summary)

  -V, --version
          Print version information

By default, Comrak will attempt to read command-line options from a config file specified by
--config-file. This behaviour can be disabled by passing --config-file none. It is not an error if
the file does not exist.

And there's a Rust interface. You can use comrak::markdown_to_html directly:

use comrak::{markdown_to_html, Options};
assert_eq!(markdown_to_html("Hello, **世界**!", &Options::default()),
           "<p>Hello, <strong>世界</strong>!</p>\n");

Or you can parse the input into an AST yourself, manipulate it, and then use your desired formatter:

extern crate comrak;
use comrak::{parse_document, format_html, Arena, Options};
use comrak::nodes::{AstNode, NodeValue};

// The returned nodes are created in the supplied Arena, and are bound by its lifetime.
let arena = Arena::new();

let root = parse_document(
    &arena,
    "This is my input.\n\n1. Also my input.\n2. Certainly my input.\n",
    &Options::default());

fn iter_nodes<'a, F>(node: &'a AstNode<'a>, f: &F)
    where F : Fn(&'a AstNode<'a>) {
    f(node);
    for c in node.children() {
        iter_nodes(c, f);
    }
}

iter_nodes(root, &|node| {
    match &mut node.data.borrow_mut().value {
        &mut NodeValue::Text(ref mut text) => {
            let orig = std::mem::replace(text, vec![]);
            *text = String::from_utf8(orig).unwrap().replace("my", "your").as_bytes().to_vec();
        }
        _ => (),
    }
});

let mut html = vec![];
format_html(root, &Options::default(), &mut html).unwrap();

assert_eq!(
    String::from_utf8(html).unwrap(),
    "<p>This is your input.</p>\n\
     <ol>\n\
     <li>Also your input.</li>\n\
     <li>Certainly your input.</li>\n\
     </ol>\n");

For running benchmarks, you will need to install hyperfine and optionally cmake.

If you want to just run the benchmark for comrak, with the current state of the repo, you can simply run

make bench-comrak

This will build comrak in release mode, and run benchmark on it. You will see the time measurements as reported by hyperfine in the console.

Makefile also provides a way to run benchmarks for comrak current state (with your changes), comrak main branch, cmark-gfm, pulldown-cmark and markdown-it.rs. For this you will need to install cmake. After that make sure that you have set-up the git submodules. In case you have not installed submodules when cloning, you can do it by running

git submodule update --init

After this is done, you can run

make bench-all

which will run benchmarks across all, and report the time take by each as well as relative time.

Apart from this, CI is also setup for running benchmarks when a pull request is first opened. It will add a comment with the results on the pull request in a tabular format comparing the 5 versions. After that you can manually trigger this CI by commenting /run-bench on the PR, this will update the existing comment with new results. Note benchmarks won't be automatically run on each push.

As with cmark and cmark-gfm, Comrak will scrub raw HTML and potentially dangerous links. This change was introduced in Comrak 0.4.0 in support of a safe-by-default posture.

To allow these, use the unsafe_ option (or --unsafe with the command line program). If doing so, we recommend the use of a sanitisation library like ammonia configured specific to your needs.

Comrak supports the five extensions to CommonMark defined in the GitHub Flavored Markdown Spec:

• Tables
• Task list items
• Strikethrough
• Autolinks
• Disallowed Raw HTML

Comrak additionally supports its own extensions, which are yet to be specced out (PRs welcome!):

• Superscript
• Header IDs
• Footnotes
• Description lists
• Front matter
• Shortcodes
• Math
• Multiline Blockquotes

By default none are enabled; they are individually enabled with each parse by setting the appropriate values in the ComrakExtensionOptions struct.

At the moment syntax highlighting of codefence blocks is the only feature that can be enhanced with plugins.

Create an implementation of the SyntaxHighlighterAdapter trait, and then provide an instance of such adapter to Plugins.render.codefence_syntax_highlighter. For formatting a markdown document with plugins, use the markdown_to_html_with_plugins function, which accepts your plugin as a parameter.

See the syntax_highlighter.rs and syntect.rs examples for more details.

syntect is a syntax highlighting library for Rust. By default, comrak offers a plugin for it. In order to utilize it, create an instance of plugins::syntect::SyntectAdapter and use it as your Plugins option.

Comrak's design goal is to model the upstream cmark-gfm as closely as possible in terms of code structure. The upside of this is that a change in cmark-gfm has a very predictable change in Comrak. Likewise, any bug in cmark-gfm is likely to be reproduced in Comrak. This could be considered a pro or a con, depending on your use case.

The downside, of course, is that the code is not what I'd call idiomatic Rust (so many RefCells), and while contributors and I have made it as fast as possible, it simply won't be as fast as some other CommonMark parsers depending on your use-case. Here are some other projects to consider:

• Raph Levien's pulldown-cmark. It's very fast, uses a novel parsing algorithm, and doesn't construct an AST (but you can use it to make one if you want). cargo doc uses this, as do many other projects in the ecosystem.
• markdown-rs (1.x) looks worth watching.
• Know of another library? Please open a PR to add it!

As far as I know, Comrak is the only library to implement all of the GitHub Flavored Markdown extensions to the spec, but this tends to only be important if you want to reproduce GitHub's Markdown rendering exactly, e.g. in a GitHub client app.

Contributions are highly encouraged; where possible I practice Optimistic Merging as described by Peter Hintjens. Please keep the code of conduct in mind when interacting with this project.

Thank you to Comrak's many contributors for PRs and issues opened!

Become a financial contributor and help sustain Comrak's development. I'm self-employed --- open-source software relies on the collective.

• GitHub Sponsors

Amelia Cuss <amelia kivikakk ee>

Copyright (c) 2017–2024, Amelia Cuss and Comrak contributors. Licensed under the 2-Clause BSD License.

cmark itself is is copyright (c) 2014, John MacFarlane.

See COPYING for all the details.