There are no reviews yet. Be the first to send feedback to the community and the maintainers!
ADS131M04-Lib
Library for the ADS131M04 four way ADC, for use with the Arduino frameworkPropulsionSystemModel
Simscape / Simulink Model for Hybrid Motor Nitrous Oxide Rocket Propulsion SystemRocketPy
A rocket maker.Avionics
The main repository for hardware and software assosciated with the Ricardo Avionics Ecosystem.The-Complete-Final-Absolute-Sporadic-Impusle
..... What it says above.injectorCFDModelling
WIP CFD model of injectors using openFOAMdaq-firmware
Data acquisition firmware for thermal, pressure, and load cell dataoptimalSizing
OptimalSizing of the rocket using GPkitCharacteristicMethod
Characteristic Method for 2d Nozzlecansat
NitrousModelling
All code relating to modelling nitrous oxide, including but not limited to: -Properties of Nitrous Oxide in different conditions -Predictions of flow rates for Nitrous Oxide -Predictions of tank conditions for Nitrous Oxide tanksroar
Pythonic implementation to design a hybrid engineiclr-hw
KiCAD Hardware Library for ICLRoptimalAscent
application of optimal control to ascent problemNimbus
Canard-controlled, throttle-able liquid bi-prop rocket, sounds pretty fun !Rocket-Control-System
daq-hardware
Data acquisition hardware for thermal, pressure, and load cell data.PyConfluenceToWikijs
Python scripts used to convert the Confluence based wiki to a format that is usable with Wiki.jsart-sims
ART Aerodynamics & Simulations filesVLAD-CanSat
Repository Containing the hardware and firmware of VLAD, a stabby boi who will participate in the Mach-21 CanSat competitionDual-Stage-Rocket
N2-Tank-and-Regulator-Sizing
First approximate models for sizing the pressure regulator and high pressure nitrogen tankMonte-Carlo-Sims---Rocketpy
A place for Systems' Monte Carlo Simslibrnp
Custom C++ networking protocol developed for RicardoOpenRocket-MassBreakdown
Quick code for a full mass breakdown from an OpenRocket .rkt modelThrottle-Control
Subsystem of Sporadic Impulse which controls lower electronics.art-astra2
PCB design and flight code for ART's Astra Mk2 rocketbigredbutton
Bipropellant-Propulsion-System-Model
Modelling and Simulation of the Bipropellant Feedsystem and Engine. Use for tuning the operating point of the engine, sizing components and active controller designFlight-Simulator
name tbcNeedleValveController
Arduino code to calibrate and control the needle valves in the plumbing systemart-designs
OpenRocket models of ART designscontrolled_explosion
Shearpin-BP-calculator
Full_Open_Rocket_Model
First complete competition rocket layout.Ricardo-PickleRick
A more compact Ricardo classic featuring a new sensor array, 4 pyro channels and 4 servo channels. Includes Ricardo bus plug too.Arc-Ignition
Zapicl-rocketry.github.io
Team website view at https://icl-rocketry.github.iopayload_gimbal
the ReAL payloadMPC
Hopper-Sim
Simulating a hopper hoppingRicardo-New-Radio-Board
Cold-Gas-Thruster
cansat-gcs
Simulink-Controls-Testbed
A simulink environment to perform flight simulations and to verify control algorithmsEncore_2021
art-apex
PCBs and software for ART's APEX rocketcansat-mock
parachute_shock_loads
Quick calculator for the maximum shock loads on the rocket at parachute deploymentDuct-Tape
Duct-Tape is a Systems designed rocket aimed at testing the air start and simultaneous ignition of boosters ( designed in 2 hours :D )Propulsion-PIDs
Ricardo-Melody-Converter
Generating song files for PickleRicardo-CapacitanceFillSensor
Ricardo-OS
The flight controller softwareOpen-Loop-Sim
glass_frog_design
A repository to contain all the design and analysis tools and documentation around Dev's implementation of the glass frogSpaceshotSizing
EngineSim
Love Open Source and this site? Check out how you can help us