Adds step-by-step debugging and stack navigation capabilities to pry using byebug.

To use, invoke pry normally. No need to start your script or app differently. Execution will stop in the first statement after your binding.pry.

def some_method
  puts 'Hello World' # Run 'step' in the console to move here
end

binding.pry
some_method          # Execution will stop here.
puts 'Goodbye World' # Run 'next' in the console to move here.

MRI 2.4.0 or higher.

Add

gem 'pry-byebug'

to your Gemfile and run

bundle install

Make sure you include the gem globally or inside the :test group if you plan to use it to debug your tests!

break: Manage breakpoints.

step: Step execution into the next line or method. Takes an optional numeric argument to step multiple times.

next: Step over to the next line within the same frame. Also takes an optional numeric argument to step multiple lines.

finish: Execute until current stack frame returns.

continue: Continue program execution and end the Pry session.

backtrace: Shows the current stack. You can use the numbers on the left side with the frame command to navigate the stack.

up: Moves the stack frame up. Takes an optional numeric argument to move multiple frames.

down: Moves the stack frame down. Takes an optional numeric argument to move multiple frames.

frame: Moves to a specific frame. Called without arguments will show the current frame.

If you're coming from Byebug or from Pry-Byebug versions previous to 3.0, you may be lacking the 'n', 's', 'c' and 'f' aliases for the stepping commands. These aliases were removed by default because they usually conflict with scratch variable names. But it's very easy to reenable them if you still want them, just add the following shortcuts to your ~/.pryrc file:

if defined?(PryByebug)
  Pry.commands.alias_command 'c', 'continue'
  Pry.commands.alias_command 's', 'step'
  Pry.commands.alias_command 'n', 'next'
  Pry.commands.alias_command 'f', 'finish'
end

Also, you might find useful as well the repeat the last command by just hitting the Enter key (e.g., with step or next). To achieve that, add this to your ~/.pryrc file:

# Hit Enter to repeat last command
Pry::Commands.command /^$/, "repeat last command" do
  pry_instance.run_command Pry.history.to_a.last
end

You can set and adjust breakpoints directly from a Pry session using the break command:

break: Set a new breakpoint from a line number in the current file, a file and line number, or a method. Pass an optional expression to create a conditional breakpoint. Edit existing breakpoints via various flags.

Examples:

break SomeClass#run            # Break at the start of `SomeClass#run`.
break Foo#bar if baz?          # Break at `Foo#bar` only if `baz?`.
break app/models/user.rb:15    # Break at line 15 in user.rb.
break 14                       # Break at line 14 in the current file.

break --condition 4 x > 2      # Change condition on breakpoint #4 to 'x > 2'.
break --condition 3            # Remove the condition on breakpoint #3.

break --delete 5               # Delete breakpoint #5.
break --disable-all            # Disable all breakpoints.

break                          # List all breakpoints.
break --show 2                 # Show details about breakpoint #2.

Type break --help from a Pry session to see all available options.

Note that all of the alternatives here are incompatible with pry-byebug. If your platform is supported by pry-byebug, you should remove any of the gems mentioned here if they are present in your Gemfile.

• pry-debugger: Provides step-by-step debugging for MRI 1.9.3 or older rubies. If you're still using those and need a step-by-step debugger to help with the upgrade, pry-debugger can be handy.

• pry-stack_explorer: Provides stack navigation capabilities for MRI 1.9.3 or older rubies. If you're still using those and need to navigate your stack to help with the upgrade, pry-stack_explorer can be handy.

• pry-nav: Provides step-by-step debugging for JRuby.

See Getting Started with Development.

Subscribe to Tidelift to ensure pry-byebug stays actively maintained, and at the same time get licensing assurances and timely security notifications for your open source dependencies.

You can also help pry-byebug by leaving a small (or big) tip through Liberapay.

Please use the Tidelift security contact to report a security vulnerability. Tidelift will coordinate the fix and disclosure.

• Gopal Patel (@nixme), creator of pry-debugger, and everybody who contributed to it. pry-byebug is a fork of pry-debugger so it wouldn't exist as it is without those contributions.
• John Mair (@banister), creator of pry.

Patches and bug reports are welcome.