🚀 SSH for GitHub Actions

繁體中文

GitHub Action for executing remote ssh commands.

Important: Only support Linux docker container.

This thing is built using Golang and drone-ssh. 🚀

Input variables

See action.yml for more detailed information.

Usage

Executing remote ssh commands.

name: remote ssh command
on: [push]
jobs:

  build:
    name: Build
    runs-on: ubuntu-latest
    steps:
    - name: executing remote ssh commands using password
      uses: appleboy/[email protected]
      with:
        host: ${{ secrets.HOST }}
        username: ${{ secrets.USERNAME }}
        password: ${{ secrets.PASSWORD }}
        port: ${{ secrets.PORT }}
        script: whoami

output:

======CMD======
whoami
======END======
out: ***
==============================================
✅ Successfully executed commands to all host.
==============================================

Setting up a SSH Key

Make sure to follow the below steps while creating SSH Keys and using them. The best practice is create the SSH Keys on local machine not remote machine. Login with username specified in Github Secrets. Generate a RSA Key-Pair:

Generate rsa key

ssh-keygen -t rsa -b 4096 -C "[email protected]"

Generate ed25519 key

ssh-keygen -t ed25519 -a 200 -C "[email protected]"

Add newly generated key into Authorized keys. Read more about authorized keys here.

Add rsa key into Authorized keys

cat .ssh/id_rsa.pub | ssh b@B 'cat >> .ssh/authorized_keys'

Add ed25519 key into Authorized keys

cat .ssh/id_ed25519.pub | ssh b@B 'cat >> .ssh/authorized_keys'

Copy Private Key content and paste in Github Secrets.

Copy rsa Private key

clip < ~/.ssh/id_rsa

Copy ed25519 Private key

clip < ~/.ssh/id_ed25519

See the detail information about SSH login without password.

A note from one of our readers: Depending on your version of SSH you might also have to do the following changes:

• Put the public key in .ssh/authorized_keys2
• Change the permissions of .ssh to 700
• Change the permissions of .ssh/authorized_keys2 to 640

If you are using OpenSSH

If you are currently using OpenSSH and are getting the following error:

ssh: handshake failed: ssh: unable to authenticate, attempted methods [none publickey]

Make sure that your key algorithm of choice is supported. On Ubuntu 20.04 or later you must explicitly allow the use of the ssh-rsa algorithm. Add the following line to your OpenSSH daemon file (which is either /etc/ssh/sshd_config or a drop-in file under /etc/ssh/sshd_config.d/):

CASignatureAlgorithms +ssh-rsa

Alternatively, ed25519 keys are accepted by default in OpenSSH. You could use this instead of rsa if needed:

ssh-keygen -t ed25519 -a 200 -C "[email protected]"

Example

Executing remote ssh commands using password

- name: executing remote ssh commands using password
  uses: appleboy/[email protected]
  with:
    host: ${{ secrets.HOST }}
    username: ${{ secrets.USERNAME }}
    password: ${{ secrets.PASSWORD }}
    port: ${{ secrets.PORT }}
    script: whoami

Using private key

- name: executing remote ssh commands using ssh key
  uses: appleboy/[email protected]
  with:
    host: ${{ secrets.HOST }}
    username: ${{ secrets.USERNAME }}
    key: ${{ secrets.KEY }}
    port: ${{ secrets.PORT }}
    script: whoami

Multiple Commands

- name: multiple command
  uses: appleboy/[email protected]
  with:
    host: ${{ secrets.HOST }}
    username: ${{ secrets.USERNAME }}
    key: ${{ secrets.KEY }}
    port: ${{ secrets.PORT }}
    script: |
      whoami
      ls -al

Multiple Hosts

  - name: multiple host
    uses: appleboy/[email protected]
    with:
-     host: "foo.com"
+     host: "foo.com,bar.com"
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
      script: |
        whoami
        ls -al

Multiple hosts with different port

  - name: multiple host
    uses: appleboy/[email protected]
    with:
-     host: "foo.com"
+     host: "foo.com:1234,bar.com:5678"
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      script: |
        whoami
        ls -al

Synchronous execution on multiple hosts

  - name: multiple host
    uses: appleboy/[email protected]
    with:
      host: "foo.com,bar.com"
+     sync: true
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
      script: |
        whoami
        ls -al

Pass environment variable to shell script

  - name: pass environment
    uses: appleboy/[email protected]
+   env:
+     FOO: "BAR"
+     BAR: "FOO"
+     SHA: ${{ github.sha }}
    with:
      host: ${{ secrets.HOST }}
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
+     envs: FOO,BAR,SHA
      script: |
        echo "I am $FOO"
        echo "I am $BAR"
        echo "sha: $SHA"

Inside env object, you need to pass every environment variable as a string, passing Integer data type or any other may output unexpected results.

Stop script after first failure

ex: missing abc folder

  - name: stop script if command error
    uses: appleboy/[email protected]
    with:
      host: ${{ secrets.HOST }}
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
+     script_stop: true
      script: |
        mkdir abc/def
        ls -al

output:

======CMD======
mkdir abc/def
ls -al

======END======
2019/11/21 01:16:21 Process exited with status 1
err: mkdir: cannot create directory ‘abc/def’: No such file or directory
##[error]Docker run failed with exit code 1

How to connect remote server using ProxyCommand?

+--------+       +----------+      +-----------+
| Laptop | <-->  | Jumphost | <--> | FooServer |
+--------+       +----------+      +-----------+

in your ~/.ssh/config, you will see the following.

Host Jumphost
  HostName Jumphost
  User ubuntu
  Port 22
  IdentityFile ~/.ssh/keys/jump_host.pem

Host FooServer
  HostName FooServer
  User ubuntu
  Port 22
  ProxyCommand ssh -q -W %h:%p Jumphost

How to convert to YAML format of GitHubActions

  - name: ssh proxy command
    uses: appleboy/[email protected]
    with:
      host: ${{ secrets.HOST }}
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
+     proxy_host: ${{ secrets.PROXY_HOST }}
+     proxy_username: ${{ secrets.PROXY_USERNAME }}
+     proxy_key: ${{ secrets.PROXY_KEY }}
+     proxy_port: ${{ secrets.PROXY_PORT }}
      script: |
        mkdir abc/def
        ls -al

Protecting a Private Key

The purpose of the passphrase is usually to encrypt the private key. This makes the key file by itself useless to an attacker. It is not uncommon for files to leak from backups or decommissioned hardware, and hackers commonly exfiltrate files from compromised systems.

  - name: ssh key passphrase
    uses: appleboy/[email protected]
    with:
      host: ${{ secrets.HOST }}
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
+     passphrase: ${{ secrets.PASSPHRASE }}
      script: |
        whoami
        ls -al

Using host fingerprint verification

Setting up SSH host fingerprint verification can help to prevent Person-in-the-Middle attacks. Before setting this up, run the command below to get your SSH host fingerprint. Remember to replace ed25519 with your appropriate key type (rsa, dsa, etc.) that your server is using and example.com with your host.

In modern OpenSSH releases, the default key types to be fetched are rsa (since version 5.1), ecdsa (since version 6.0), and ed25519 (since version 6.7).

ssh example.com ssh-keygen -l -f /etc/ssh/ssh_host_ed25519_key.pub | cut -d ' ' -f2

Now you can adjust you config:

  - name: ssh key passphrase
    uses: appleboy/[email protected]
    with:
      host: ${{ secrets.HOST }}
      username: ${{ secrets.USERNAME }}
      key: ${{ secrets.KEY }}
      port: ${{ secrets.PORT }}
+     fingerprint: ${{ secrets.FINGERPRINT }}
      script: |
        whoami
        ls -al

Contributing

We would love for you to contribute to appleboy/ssh-action, pull requests are welcome!

License

The scripts and documentation in this project are released under the MIT License