Teensy footprint library for KiCAD
This repo includes KiCAD footprints for the following Teensy versions:
| Teensy | Pinouts | 3D model |
|---|---|---|
| Teensy 1.0 | C, Arduino | ❌ |
| Teensy++ 1.0 | C, Arduino | ❌ |
| Teensy 2.0 | C, Ardino | ❌ |
| Teensy++ 2.0 | C, Arduino | ❌ |
| Teensy 3.0 | Front, Back | ❌ |
| Teensy 3.1 | Front, Back | ❌ |
| Teensy 3.2 | Front, Back | ❌ |
| Teensy LC | Front, Back | ❌ |
| Teensy 3.5 | Front, Back | ✔️ (by Darcy) |
| Teensy 3.6 | Front, Back | ✔️ (by Darcy) |
| Teensy 4.0* | Front, Back | ✔️ |
| Teensy 4.1 | Front, Back | ✔️ (by Zack Kummer) |
* includes SMT version
Notes:
- The Teensy 4.0 SMT footprint requires the addition of edge cuts (indicated
by lines in the
Dwgs.Userlayer) which create castellated connections for most pins. Pins 2, 3, 31, 32 & 34 are not castellated and will require careful soldering and probably a wire to ensure a reliable connection. - There are two footprints for Teensy 3.0/3.1/3.2 and 3.5/3.6. One that includes the through-hole connections on Teensy and one that adds all of the SMT connections on the bottom of the Teensy.
For symbols look here: https://github.com/XenGi/teensy_library