PCB Business Card
In this repository I will explain the steps I followed to create this Business Card made out of PCB material inspired by Chris Tully's card from Hackaday
There are more pictures on the Media folder.
I have used 3 Open Source Programs in total:
- KiCad v5.1.6 <- I have also tried up to version 6.0.9 and it works
- Inkscape v1.0.0 <- Very important. I could only get it to export with the 1.0.0 version
- Svg2Shenzen v0.2.18.7
The instructions are very easy and clear on how to install each program.
Creating the Canvas in Inkscape
Once the extension has been added in Inkscape. Go to Extension > Svg2Shenzhen > Prepare Document and create a 100 x 100 mm document and click Apply.
Start creating your design by layers. Keep in mind how Unexposed Copper, Exposed Copper, SilkScreen and Naked FR4 look like. Try to play with those combinations. This video by TwinkleTwinkie gives a good tutorial on how the whole proccess works. He also shows a good overview of the color palette you will have:
After fiddling with Inkscape for a couple of hours (The GUI isn't that intuitive and I wasn't particularly inspired) I ended up with these layers:
Disclaimer: I couldn't get to work the edge.cuts layer in Inkscape (Same problem as him), so since it was a simple 85.6x54 mm card with edges of 2.5 mm radius. I easily drew them in KiCad in the Edge.Cuts Layer.
Sending the File
Once I had everything finished. I prepared my Gerber files in KiCad, packed them inside a rar and ordered them to JLCPCB with standard 0.8mm thickness and everything else with default settings: HASL with lead (Next batch will be done lead free, since it is safer for humans and the enviorenment, and the price only increases about 10 cents per card), FR4 base, black PCB Color... 10 of them cost me $4 + $20 shipping ($2.40 a card), so a bit expensive for my taste.
In this repository you can find the SVG file I made in Inkscape, as well as the Gerber files I made in KiCad and sent to JLCPCB.
Youtube Video
After quite a few requests from people telling me to help them with their PCB Business Cards, I decided to create my own Youtube tutorial! Enjoy it!
