There are no reviews yet. Be the first to send feedback to the community and the maintainers!
Project_AI_smartmethods_chatbot_voice-ar
These will help clever ways to offer assistance, welcome and offer company services and can be programmed to do more.Project_Mechanical_Wheels-Platform
Design and implementation of four wheel base analysis.Project_Electronics_WiFi-ESP32-LED-Control
WiFi ESP32 LED Controlproject_IOT_Arm
Arm control interface design for 6 Motors.Project_Mechanical_End-Effector-Arm
In robotics, an end effector is a device or tool that's connected to the end of a robot arm where the hand would be. The end effector is the part of the robot that interacts with the environment. ... If a robot needs to pick something up, a type of robot hand called a gripper is the most functional end effector.Project_Electronics_Two-wheel-robot-base
Motor drive design and implementation for two-wheel robot base.Project_Electronics_Arm
Motor drive design and implementation for robot arm, Controlling are 6 servos position using a potentiometer variable.Project_IOT_RobotControlPanel
Robot Control Panel a simple control panel for robotics .Project_AI_Real-time-Face-detection
Project_IOT_Two-Control-panel
Two Control panel, Slider Arm and car control.Project_Mechanical_Arm
Complete arm installationProject_Electronics_Two-wheel-robot-base-use-of-a-variable-resistance
Project_Electronics_Eyes-control-circuit-design
Eye control circuit design using (p n p) transistor.Project_Electronics_Adjustable-Output-Voltage-Regulator-using-7805
Fixed-Output voltage regulator is an important component in most electronic appliances. Fixed voltage regulation is important for microcontrollers and microprocessors. For microcontroller applications, 5V fixed voltage regulators are used. Normally 7805 voltage regulator is used in such applications. 7805 comes under 78xx series.Project_Electronics_Bluetooth-and-Ultrasonic-HC-with-6-Motors
Moving the robot’s arms three coordinated movements to welcome when a person approaches a certain distance and a signal will be sent to the iPad to open the screen through Bluetooth, at 10 cm the arms will be moved up and at 9 cm the arms will be moved forward and at 8 cm the arms will be joined and at 5 cm The arms will return down to the origin.Love Open Source and this site? Check out how you can help us