MKS-Robin-Nano-V3.X
Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.
Related tutorials and Notice
- User Manual.click here
- Welcome to follow us on Facebook to learn about the company's latest developments.click here
How to buy
Compare between Robin Nano V2.0 and V3.0
| ITEMS | Robin Nano V2.0 | Robin Nano V3.0 |
|---|---|---|
| MCU | STM32F103VET6(72MHz) | STM32F407VGT6（168MHz） |
| FLASH/RAM | 512KB FLASH/64KB RAM | 1024KB FLASH/192KB RAM |
| USB Disk | Not support | Support |
| TF card | Support(SDIO) | Support(SPI3) |
| WIFI connect | USART1 | USART1+SPI2 |
| Virtural USB Device | Not support | Support |
| Motor interface | 5 axis | 6 axis(Two Z axis share the same driver) |
| PWM FAN(s) | 1 channel | 2 channels |
| PWM TTL | Not Support | Support |
| Independent serial port | Not support | Support(UART3) |
| Power TVS protect | No | Yes |
| Expansion SD slot | Support | Not support |
| MAX31855 interface | Support | Not support |
| EEPROM | 4KB | 4KB |
| SPI Flash | 8M | 8M |
| LCD support | MKS TS35/MKS H43/MKS MINI12864 V3/LCD12864/LCD2004 | MKS TS35/MKS H43/MKS MINI12864 V3/LCD12864/LCD2004 |
| Firmware | Marlin 2.0.x, Klipper | Marlin 2.0.x, Klipper, Reprap firmware(MKS version) |
Note: As MKS Robin Nano V2.0 doesn't has an independent serial port, so if using with the MKS H43, V2.0 cannot work with Wifi module, but V3.0 can make it.
Hardware
The hardware design is openned source on : https://github.com/makerbase-mks/MKS-Robin-Nano-V3.X/tree/main/hardware
Firmware
The factory firmware of Nano V3 is based on Marlin 2.x, actually, we directly use the same respository of Nano V1.2/2.0:https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware. Just modify the type of motherboard to compile the related firmware.
Now Nano V3 also supports RepRapFirmware (RRF). For details, please refer to:https://github.com/makerbase-mks/RepRapFirmware-for-MKS-Boards
Nano V3 has supported klipper firmware. For details, please refer to:https://github.com/makerbase-mks/Klipper-for-MKS-Boards
Note
- Thank you for using MKS products. If you have any questions during use, please contact us in time and we will work with you to solve it.
- For more product dynamic information and tutorial materials, you can always follow MKS's Facebook/Twitter/Discord/Reddit/Youtube and Github. Thank you!
- MKS Github: https://github.com/makerbase-mks
- MKS Facebook: https://www.facebook.com/Makerbase.mks/
- MKS Twitter: https://twitter.com/home?lang=en
- MKS Discord: https://discord.gg/4uar57NEyU
- MKS Reddit: https://www.reddit.com/user/MAKERBASE-TEAM/
