CANable-MKS
MKS CANable firmware and schematic are open source.
MKS CANable V1.0
MKS CANable V1.0 module is an upgraded version of CANable, which adopts TJA1051T/3, a highly integrated chip with interface between controller area network (can) protocol controller and physical two-wire can bus. It is very suitable for product debugging, can bus control and high-speed can Application in automobile industry.
MKS CANable Pro V1.0 module is the upgraded version of MKS CANable V1.0 module, which adopts ADM3053BRWZ, a highly integrated fully isolated chip with 2.5KV rms signal and power isolation function. Under the premise of high transmission rate and high operation stability, MKS CANable Pro V1.0 module has stronger anti-interference ability, which is very suitable for industrial debugging or motor application.
MKS CANable V2.0
Features
- Support CAN2.0A, CAN2.0B, baud rate up to 1M;
- Support candleLight, slcan firmware, slcan initially supports CAN-FD, and the test rate can reach 2M/5M baud rate;
- Compatible with socketcan through slcand;
- You can choose to enable/disable the terminal resistance through the short-circuit cap;
- Support Type-C USB interface, online firmware upgrade and DFU mode upgrade firmware;
- Using high-performance ARM Cortex-M4 STM32G431C8T6 processor, operating frequency up to 170MHz;
- Provide schematic diagrams, firmware and source code, host computer, etc., complete and convenient to use;
Related tutorials and Notice
MKS CANable test video. Click here.
Hardware
MKS CANable V1.0 module. You can view the schematic diagram, layout, size and relevant component specifications of MKS CANable. MKS CANable hardware.Click here.
MKS CANable Pro V1.0 module. You can view the schematic diagram, layout, size and relevant component specifications of MKS CANable Pro.Click here
MKS CANable V2.0 module. You can view the schematic diagram, layout, size and relevant component specifications of MKS CANable Pro.Click here
Firmware
You can view and burn their firmware.Click here.