简体中文 Русский

ozzo-log is a Go package providing enhanced logging support for Go programs. It has the following features:

• High performance through asynchronous logging;
• Recording message severity levels;
• Recording message categories;
• Recording message call stacks;
• Filtering via severity levels and categories;
• Customizable message format;
• Configurable and pluggable message handling through log targets;
• Included console, file, network, and email log targets.

Go 1.2 or above.

Run the following command to install the package:

go get github.com/go-ozzo/ozzo-log

The following code snippet shows how you can use this package.

package main

import (
	"github.com/go-ozzo/ozzo-log"
)

func main() {
    // creates the root logger
	logger := log.NewLogger()

	// adds a console target and a file target
	t1 := log.NewConsoleTarget()
	t2 := log.NewFileTarget()
	t2.FileName = "app.log"
	t2.MaxLevel = log.LevelError
	logger.Targets = append(logger.Targets, t1, t2)

	logger.Open()
	defer logger.Close()

	// calls log methods to log various log messages
	logger.Error("plain text error")
	logger.Error("error with format: %v", true)
	logger.Debug("some debug info")

	// customizes log category
	l := logger.GetLogger("app.services")
	l.Info("some info")
	l.Warning("some warning")

	...
}

A logger provides various log methods that can be called by application code to record messages of various severity levels.

A target filters log messages by their severity levels and message categories and processes the filtered messages in various ways, such as saving them in files, sending them in emails, etc.

A logger can be equipped with multiple targets each with different filtering conditions.

The following targets are included in the ozzo-log package.

• ConsoleTarget: displays filtered messages to console window
• FileTarget: saves filtered messages in a file (supporting file rotating)
• NetworkTarget: sends filtered messages to an address on a network
• MailTarget: sends filtered messages in emails

You can create a logger, configure its targets, and start to use logger with the following code:

// creates the root logger
logger := log.NewLogger()
logger.Targets = append(logger.Targets, target1, target2, ...)
logger.Open()
...calling log methods...
logger.Close()

You can log a message of a particular severity level (following the RFC5424 standard) by calling one of the following methods of the Logger struct:

• Emergency(): the system is unusable.
• Alert(): action must be taken immediately.
• Critical(): critical conditions.
• Error(): error conditions.
• Warning(): warning conditions.
• Notice(): normal but significant conditions.
• Info(): informational purpose.
• Debug(): debugging purpose.

Each log message is associated with a category which can be used to group messages. For example, you may use the same category for messages logged by the same Go package. This will allow you to selectively send messages to different targets.

When you call log.NewLogger(), a root logger is returned which logs messages using the category named as app. To log messages with a different category, call the GetLogger() method of the root logger or a parent logger to get a child logger and then call its log methods:

logger := log.NewLogger()
// the message is of category "app"
logger.Error("...")

l1 := logger.GetLogger("system")
// the message is of category "system"
l1.Error("...")

l2 := l1.GetLogger("app.models")
// the message is of category "app.models"
l2.Error("...")

By default, each log message takes this format when being sent to different targets:

2015-10-22T08:39:28-04:00 [Error][app.models] something is wrong
...call stack (if enabled)...

You may customize the message format by specifying your own message formatter when calling Logger.GetLogger(). For example,

logger := log.NewLogger()
logger = logger.GetLogger("app", func (l *Logger, e *Entry) string {
    return fmt.Sprintf("%v [%v][%v] %v%v", e.Time.Format(time.RFC822Z), e.Level, e.Category, e.Message, e.CallStack)
})

By setting Logger.CallStackDepth as a positive number, it is possible to record call stack information for each log method call. You may further configure Logger.CallStackFilter so that only call stack frames containing the specified substring will be recorded. For example,

logger := log.NewLogger()
// record call stacks containing "myapp/src" up to 5 frames per log message
logger.CallStackDepth = 5
logger.CallStackFilter = "myapp/src"

By default, messages of all severity levels will be recorded. You may customize Logger.MaxLevel to change this behavior. For example,

logger := log.NewLogger()
// only record messages between Emergency and Warning levels
logger.MaxLevel = log.LevelWarning

Besides filtering messages at the logger level, a finer grained message filtering can be done at target level. For each target, you can specify its MaxLevel similar to that with the logger; you can also specify which categories of the messages the target should handle. For example,

target := log.NewConsoleTarget()
// handle messages between Emergency and Info levels
target.MaxLevel = log.LevelInfo
// handle messages of categories which start with "system.db." or "app."
target.Categories = []string{"system.db.*", "app.*"}

When an application is deployed for production, a common need is to allow changing the logging configuration of the application without recompiling its source code. ozzo-log is designed with this in mind.

For example, you can use a JSON file to specify how the application and its logger should be configured:

{
    "Logger": {
        "Targets": [
            {
                "type": "ConsoleTarget",
            },
            {
                "type": "FileTarget",
                "FileName": "app.log",
                "MaxLevel": 4   // Warning or above
            }
        ]
    }
}

Assuming the JSON file is app.json, in your application code you can use the ozzo-config package to load the JSON file and configure the logger used by the application:

package main

import (
	"github.com/go-ozzo/ozzo-config"
    "github.com/go-ozzo/ozzo-log"
)

func main() {
    c := config.New()
    c.Load("app.json")
    // register the target types to allow configuring Logger.Targets.
    c.Register("ConsoleTarget", log.NewConsoleTarget)
    c.Register("FileTarget", log.NewFileTarget)

    logger := log.NewLogger()
    if err := c.Configure(logger, "Logger"); err != nil {
        panic(err)
    }
}

To change the logger configuration, simply modify the JSON file without recompiling the Go source files.