The Rails Style Guide
Introduction
Role models are important.
 — Officer Alex J. Murphy / RoboCop
Tip
|
You can find a beautiful version of this guide with much improved navigation at https://rails.rubystyle.guide. |
The goal of this guide is to present a set of best practices and style prescriptions for Ruby on Rails 4 development. It’s a complementary guide to the already existing community-driven Ruby coding style guide.
This Rails style guide recommends best practices so that real-world Rails programmers can write code that can be maintained by other real-world Rails programmers. A style guide that reflects real-world usage gets used, and a style guide that holds to an ideal that has been rejected by the people it is supposed to help risks not getting used at all - no matter how good it is.
The guide is separated into several sections of related rules. I’ve tried to add the rationale behind the rules (if it’s omitted I’ve assumed it’s pretty obvious).
I didn’t come up with all the rules out of nowhere - they are mostly based on my extensive career as a professional software engineer, feedback and suggestions from members of the Rails community and various highly regarded Rails programming resources.
Note
|
Some of the advice here is applicable only to Rails 4.0+. |
You can generate a PDF copy of this guide using AsciiDoctor PDF, and an HTML copy with AsciiDoctor using the following commands:
# Generates README.pdf
asciidoctor-pdf -a allow-uri-read README.adoc
# Generates README.html
asciidoctor
Tip
|
Install the gem install rouge |
Translations of the guide are available in the following languages:
Tip
|
RuboCop, a static code analyzer (linter) and formatter, has a rubocop-rails extension, based on this style guide.
|
Configuration
Config Initializers
Put custom initialization code in config/initializers
.
The code in initializers executes on application startup.
Gem Initializers
Keep initialization code for each gem in a separate file with the same name as the gem, for example carrierwave.rb
, active_admin.rb
, etc.
Dev/Test/Prod Configs
Adjust accordingly the settings for development, test and production environment (in the corresponding files under config/environments/
)
Mark additional assets for precompilation (if any):
# config/environments/production.rb
# Precompile additional assets (application.js, application.css,
#and all non-JS/CSS are already added)
config.assets.precompile += %w( rails_admin/rails_admin.css rails_admin/rails_admin.js )
App Config
Keep configuration that’s applicable to all environments in the config/application.rb
file.
Load Rails Config Defaults
When upgrading to a newer Rails version, your application’s configuration setting will remain on the previous version. To take advantage of the latest recommended Rails practices, the config.load_defaults
setting should match your Rails version.
# good
config.load_defaults 6.1
Staging Like Prod
Avoid creating additional environment configurations than the defaults of development
, test
and production
.
If you need a production-like environment such as staging, use environment variables for configuration options.
YAML Config
Keep any additional configuration in YAML files under the config/
directory.
Since Rails 4.2 YAML configuration files can be easily loaded with the new config_for
method:
Rails::Application.config_for(:yaml_file)
Routing
Member Collection Routes
When you need to add more actions to a RESTful resource (do you really need them at all?) use member
and collection
routes.
# bad
get 'subscriptions/:id/unsubscribe'
resources :subscriptions
# good
resources :subscriptions do
get 'unsubscribe', on: :member
end
# bad
get 'photos/search'
resources :photos
# good
resources :photos do
get 'search', on: :collection
end
Many Member Collection Routes
If you need to define multiple member/collection
routes use the alternative block syntax.
resources :subscriptions do
member do
get 'unsubscribe'
# more routes
end
end
resources :photos do
collection do
get 'search'
# more routes
end
end
Nested Routes
Use nested routes to express better the relationship between Active Record models.
class Post < ActiveRecord::Base
has_many :comments
end
class Comment < ActiveRecord::Base
belongs_to :post
end
# routes.rb
resources :posts do
resources :comments
end
Shallow Routes
If you need to nest routes more than 1 level deep then use the shallow: true
option.
This will save user from long URLs posts/1/comments/5/versions/7/edit
and you from long URL helpers edit_post_comment_version
.
resources :posts, shallow: true do
resources :comments do
resources :versions
end
end
Namespaced Routes
Use namespaced routes to group related actions.
namespace :admin do
# Directs /admin/products/* to Admin::ProductsController
# (app/controllers/admin/products_controller.rb)
resources :products
end
No Wild Routes
Never use the legacy wild controller route. This route will make all actions in every controller accessible via GET requests.
# very bad
match ':controller(/:action(/:id(.:format)))'
No Match Routes
Don’t use match
to define any routes unless there is need to map multiple request types among [:get, :post, :patch, :put, :delete]
to a single action using :via
option.
Controllers
Skinny Controllers
Keep the controllers skinny - they should only retrieve data for the view layer and shouldn’t contain any business logic (all the business logic should naturally reside in the model).
One Method
Each controller action should (ideally) invoke only one method other than an initial find or new.
Shared Instance Variables
Minimize the number of instance variables passed between a controller and a view.
Lexically Scoped Action Filter
Controller actions specified in the option of Action Filter should be in lexical scope. The ActionFilter specified for an inherited action makes it difficult to understand the scope of its impact on that action.
# bad
class UsersController < ApplicationController
before_action :require_login, only: :export
end
# good
class UsersController < ApplicationController
before_action :require_login, only: :export
def export
end
end
Controllers: Rendering
Inline Rendering
Prefer using a template over inline rendering.
# very bad
class ProductsController < ApplicationController
def index
render inline: "<% products.each do |p| %><p><%= p.name %></p><% end %>", type: :erb
end
end
# good
## app/views/products/index.html.erb
<%= render partial: 'product', collection: products %>
## app/views/products/_product.html.erb
<p><%= product.name %></p>
<p><%= product.price %></p>
## app/controllers/products_controller.rb
class ProductsController < ApplicationController
def index
render :index
end
end
Plain Text Rendering
Prefer render plain:
over render text:
.
# bad - sets MIME type to `text/html`
...
render text: 'Ruby!'
...
# bad - requires explicit MIME type declaration
...
render text: 'Ruby!', content_type: 'text/plain'
...
# good - short and precise
...
render plain: 'Ruby!'
...
HTTP Status Code Symbols
Prefer corresponding symbols to numeric HTTP status codes. They are meaningful and do not look like "magic" numbers for less known HTTP status codes.
# bad
...
render status: 403
...
# good
...
render status: :forbidden
...
Models
Model Classes
Introduce non-Active Record model classes freely.
Meaningful Model Names
Name the models with meaningful (but short) names without abbreviations.
Non-ActiveRecord Models
If you need objects that support ActiveRecord-like behavior (like validations) without the database functionality, use ActiveModel::Model
.
class Message
include ActiveModel::Model
attr_accessor :name, :email, :content, :priority
validates :name, presence: true
validates :email, format: { with: /\A[-a-z0-9_+\.]+\@([-a-z0-9]+\.)+[a-z0-9]{2,4}\z/i }
validates :content, length: { maximum: 500 }
end
Starting with Rails 6.1, you can also extend the attributes API from ActiveRecord using ActiveModel::Attributes
.
class Message
include ActiveModel::Model
include ActiveModel::Attributes
attribute :name, :string
attribute :email, :string
attribute :content, :string
attribute :priority, :integer
validates :name, presence: true
validates :email, format: { with: /\A[-a-z0-9_+\.]+\@([-a-z0-9]+\.)+[a-z0-9]{2,4}\z/i }
validates :content, length: { maximum: 500 }
end
Model Business Logic
Unless they have some meaning in the business domain, don’t put methods in your model that just format your data (like code generating HTML). These methods are most likely going to be called from the view layer only, so their place is in helpers. Keep your models for business logic and data-persistence only.
Models: Active Record
Keep Active Record Defaults
Avoid altering Active Record defaults (table names, primary key, etc) unless you have a very good reason (like a database that’s not under your control).
# bad - don't do this if you can modify the schema
class Transaction < ActiveRecord::Base
self.table_name = 'order'
...
end
Enums
Prefer using the hash syntax for enum
. Array makes the database values implicit
& any insertion/removal/rearrangement of values in the middle will most probably
lead to broken code.
class Transaction < ActiveRecord::Base
# bad - implicit values - ordering matters
enum type: %i[credit debit]
# good - explicit values - ordering does not matter
enum type: {
credit: 0,
debit: 1
}
end
Macro Style Methods
Group macro-style methods (has_many
, validates
, etc) in the beginning of the class definition.
class User < ActiveRecord::Base
# keep the default scope first (if any)
default_scope { where(active: true) }
# constants come up next
COLORS = %w(red green blue)
# afterwards we put attr related macros
attr_accessor :formatted_date_of_birth
attr_accessible :login, :first_name, :last_name, :email, :password
# Rails 4+ enums after attr macros
enum role: { user: 0, moderator: 1, admin: 2 }
# followed by association macros
belongs_to :country
has_many :authentications, dependent: :destroy
# and validation macros
validates :email, presence: true
validates :username, presence: true
validates :username, uniqueness: { case_sensitive: false }
validates :username, format: { with: /\A[A-Za-z][A-Za-z0-9._-]{2,19}\z/ }
validates :password, format: { with: /\A\S{8,128}\z/, allow_nil: true }
# next we have callbacks
before_save :cook
before_save :update_username_lower
# other macros (like devise's) should be placed after the callbacks
...
end
has_many :through
Prefer has_many :through
to has_and_belongs_to_many
.
Using has_many :through
allows additional attributes and validations on the join model.
# not so good - using has_and_belongs_to_many
class User < ActiveRecord::Base
has_and_belongs_to_many :groups
end
class Group < ActiveRecord::Base
has_and_belongs_to_many :users
end
# preferred way - using has_many :through
class User < ActiveRecord::Base
has_many :memberships
has_many :groups, through: :memberships
end
class Membership < ActiveRecord::Base
belongs_to :user
belongs_to :group
end
class Group < ActiveRecord::Base
has_many :memberships
has_many :users, through: :memberships
end
Read Attribute
Prefer self[:attribute]
over read_attribute(:attribute)
.
# bad
def amount
read_attribute(:amount) * 100
end
# good
def amount
self[:amount] * 100
end
Write Attribute
Prefer self[:attribute] = value
over write_attribute(:attribute, value)
.
# bad
def amount
write_attribute(:amount, 100)
end
# good
def amount
self[:amount] = 100
end
New-style Validations
Always use the "new-style" validations.
# bad
validates_presence_of :email
validates_length_of :email, maximum: 100
# good
validates :email, presence: true, length: { maximum: 100 }
Single-attribute Validations
To make validations easy to read, don’t list multiple attributes per validation.
# bad
validates :email, :password, presence: true
validates :email, length: { maximum: 100 }
# good
validates :email, presence: true, length: { maximum: 100 }
validates :password, presence: true
Custom Validator File
When a custom validation is used more than once or the validation is some regular expression mapping, create a custom validator file.
# bad
class Person
validates :email, format: { with: /\A([^@\s]+)@((?:[-a-z0-9]+\.)+[a-z]{2,})\z/i }
end
# good
class EmailValidator < ActiveModel::EachValidator
def validate_each(record, attribute, value)
record.errors[attribute] << (options[:message] || 'is not a valid email') unless value =~ /\A([^@\s]+)@((?:[-a-z0-9]+\.)+[a-z]{2,})\z/i
end
end
class Person
validates :email, email: true
end
App Validators
Keep custom validators under app/validators
.
Custom Validators Gem
Consider extracting custom validators to a shared gem if you’re maintaining several related apps or the validators are generic enough.
Named Scopes
Use named scopes freely.
class User < ActiveRecord::Base
scope :active, -> { where(active: true) }
scope :inactive, -> { where(active: false) }
scope :with_orders, -> { joins(:orders).select('distinct(users.id)') }
end
Named Scope Class
When a named scope defined with a lambda and parameters becomes too complicated, it is preferable to make a class method instead which serves the same purpose of the named scope and returns an ActiveRecord::Relation
object.
Arguably you can define even simpler scopes like this.
class User < ActiveRecord::Base
def self.with_orders
joins(:orders).select('distinct(users.id)')
end
end
Callbacks Order
Order callback declarations in the order in which they will be executed. For reference, see Available Callbacks.
#bad
class Person
after_commit :after_commit_callback
before_validation :before_validation_callback
end
#good
class Person
before_validation :before_validation_callback
after_commit :after_commit_callback
end
Beware Skip Model Validations
Beware of the behavior of the following methods. They do not run the model validations and could easily corrupt the model state.
# bad
Article.first.decrement!(:view_count)
DiscussionBoard.decrement_counter(:post_count, 5)
Article.first.increment!(:view_count)
DiscussionBoard.increment_counter(:post_count, 5)
person.toggle :active
product.touch
Billing.update_all("category = 'authorized', author = 'David'")
user.update_attribute(:website, 'example.com')
user.update_columns(last_request_at: Time.current)
Post.update_counters 5, comment_count: -1, action_count: 1
# good
user.update_attributes(website: 'example.com')
User-friendly URLs
Use user-friendly URLs.
Show some descriptive attribute of the model in the URL rather than its id
.
There is more than one way to achieve this.
Override the to_param
Method of the Model
This method is used by Rails for constructing a URL to the object.
The default implementation returns the id
of the record as a String.
It could be overridden to include another human-readable attribute.
class Person
def to_param
"#{id} #{name}".parameterize
end
end
In order to convert this to a URL-friendly value, parameterize
should be called on the string.
The id
of the object needs to be at the beginning so that it can be found by the find
method of Active Record.
friendly_id
Gem
It allows creation of human-readable URLs by using some descriptive attribute of the model instead of its id
.
class Person
extend FriendlyId
friendly_id :name, use: :slugged
end
Check the gem documentation for more information about its usage.
find_each
Use find_each
to iterate over a collection of AR objects.
Looping through a collection of records from the database (using the all
method, for example) is very inefficient since it will try to instantiate all the objects at once.
In that case, batch processing methods allow you to work with the records in batches, thereby greatly reducing memory consumption.
# bad
Person.all.each do |person|
person.do_awesome_stuff
end
Person.where('age > 21').each do |person|
person.party_all_night!
end
# good
Person.find_each do |person|
person.do_awesome_stuff
end
Person.where('age > 21').find_each do |person|
person.party_all_night!
end
before_destroy
Since Rails creates callbacks for dependent associations, always call before_destroy
callbacks that perform validation with prepend: true
.
# bad (roles will be deleted automatically even if super_admin? is true)
has_many :roles, dependent: :destroy
before_destroy :ensure_deletable
def ensure_deletable
raise "Cannot delete super admin." if super_admin?
end
# good
has_many :roles, dependent: :destroy
before_destroy :ensure_deletable, prepend: true
def ensure_deletable
raise "Cannot delete super admin." if super_admin?
end
has_many
/has_one
Dependent Option
Define the dependent
option to the has_many
and has_one
associations.
# bad
class Post < ActiveRecord::Base
has_many :comments
end
# good
class Post < ActiveRecord::Base
has_many :comments, dependent: :destroy
end
save!
When persisting AR objects always use the exception raising bang! method or handle the method return value.
This applies to create
, save
, update
, destroy
, first_or_create
and find_or_create_by
.
# bad
user.create(name: 'Bruce')
# bad
user.save
# good
user.create!(name: 'Bruce')
# or
bruce = user.create(name: 'Bruce')
if bruce.persisted?
...
else
...
end
# good
user.save!
# or
if user.save
...
else
...
end
Models: Active Record Queries
Avoid Interpolation
Avoid string interpolation in queries, as it will make your code susceptible to SQL injection attacks.
# bad - param will be interpolated unescaped
Client.where("orders_count = #{params[:orders]}")
# good - param will be properly escaped
Client.where('orders_count = ?', params[:orders])
Named Placeholder
Consider using named placeholders instead of positional placeholders when you have more than 1 placeholder in your query.
# okish
Client.where(
'created_at >= ? AND created_at <= ?',
params[:start_date], params[:end_date]
)
# good
Client.where(
'created_at >= :start_date AND created_at <= :end_date',
start_date: params[:start_date], end_date: params[:end_date]
)
find
Favor the use of find
over where.take!
, find_by!
, and find_by_id!
when you need to retrieve a single record by primary key id and raise ActiveRecord::RecordNotFound
when the record is not found.
# bad
User.where(id: id).take!
# bad
User.find_by_id!(id)
# bad
User.find_by!(id: id)
# good
User.find(id)
find_by
Favor the use of find_by
over where.take
and find_by_attribute
when you need to retrieve a single record by one or more attributes and return nil
when the record is not found.
# bad
User.where(email: email).take
User.where(first_name: 'Bruce', last_name: 'Wayne').take
# bad
User.find_by_email(email)
User.find_by_first_name_and_last_name('Bruce', 'Wayne')
# good
User.find_by(email: email)
User.find_by(first_name: 'Bruce', last_name: 'Wayne')
Hash conditions
Favor passing conditions to where
and where.not
as a hash over using fragments of SQL.
# bad
User.where("name = ?", name)
# good
User.where(name: name)
# bad
User.where("id != ?", id)
# good
User.where.not(id: id)
Order by id
Don’t use the id
column for ordering.
The sequence of ids is not guaranteed to be in any particular order, despite often (incidentally) being chronological.
Use a timestamp column to order chronologically.
As a bonus the intent is clearer.
# bad
scope :chronological, -> { order(id: :asc) }
# good
scope :chronological, -> { order(created_at: :asc) }
pluck
Use pluck to select a single value from multiple records.
# bad
User.all.map(&:name)
# bad
User.all.map { |user| user[:name] }
# good
User.pluck(:name)
pick
Use pick to select a single value from a single record.
# bad
User.pluck(:name).first
# bad
User.first.name
# good
User.pick(:name)
Squished Heredocs
When specifying an explicit query in a method such as find_by_sql
, use heredocs with squish
.
This allows you to legibly format the SQL with line breaks and indentations, while supporting syntax highlighting in many tools (including GitHub, Atom, and RubyMine).
User.find_by_sql(<<-SQL.squish)
SELECT
users.id, accounts.plan
FROM
users
INNER JOIN
accounts
ON
accounts.user_id = users.id
# further complexities...
SQL
String#squish
removes the indentation and newline characters so that your server log shows a fluid string of SQL rather than something like this:
SELECT\n users.id, accounts.plan\n FROM\n users\n INNER JOIN\n acounts\n ON\n accounts.user_id = users.id
size
over count
or length
When querying Active Record collections, prefer size
(selects between count/length behavior based on whether collection is already loaded) or length
(always loads the whole collection and counts the array elements) over count
(always does a database query for the count).
# bad
User.count
# good
User.all.size
# good - if you really need to load all users into memory
User.all.length
Migrations
Schema Version
Keep the schema.rb
(or structure.sql
) under version control.
DB Schema Load
Use rake db:schema:load
instead of rake db:migrate
to initialize an empty database.
Default Migration Values
Enforce default values in the migrations themselves instead of in the application layer.
# bad - application enforced default value
class Product < ActiveRecord::Base
def amount
self[:amount] || 0
end
end
# good - database enforced
class AddDefaultAmountToProducts < ActiveRecord::Migration
def change
change_column_default :products, :amount, 0
end
end
While enforcing table defaults only in Rails is suggested by many Rails developers, it’s an extremely brittle approach that leaves your data vulnerable to many application bugs. And you’ll have to consider the fact that most non-trivial apps share a database with other applications, so imposing data integrity from the Rails app is impossible.
3-state Boolean
With SQL databases, if a boolean column is not given a default value, it will have three possible values: true
, false
and NULL
.
Boolean operators [work in unexpected ways](https://en.wikipedia.org/wiki/Three-valued_logic) with NULL
.
For example in SQL queries, true AND NULL
is NULL
(not false), true AND NULL OR false
is NULL
(not false). This can make SQL queries return unexpected results.
To avoid such situations, boolean columns should always have a default value and a NOT NULL
constraint.
# bad - boolean without a default value
add_column :users, :active, :boolean
# good - boolean with a default value (`false` or `true`) and with restricted `NULL`
add_column :users, :active, :boolean, default: true, null: false
add_column :users, :admin, :boolean, default: false, null: false
Foreign Key Constraints
Enforce foreign-key constraints. As of Rails 4.2, Active Record supports foreign key constraints natively.
Change vs Up/Down
When writing constructive migrations (adding tables or columns), use the change
method instead of up
and down
methods.
# the old way
class AddNameToPeople < ActiveRecord::Migration
def up
add_column :people, :name, :string
end
def down
remove_column :people, :name
end
end
# the new preferred way
class AddNameToPeople < ActiveRecord::Migration
def change
add_column :people, :name, :string
end
end
Define Model Class Migrations
If you have to use models in migrations, make sure you define them so that you don’t end up with broken migrations in the future.
# db/migrate/<migration_file_name>.rb
# frozen_string_literal: true
# bad
class ModifyDefaultStatusForProducts < ActiveRecord::Migration
def change
old_status = 'pending_manual_approval'
new_status = 'pending_approval'
reversible do |dir|
dir.up do
Product.where(status: old_status).update_all(status: new_status)
change_column :products, :status, :string, default: new_status
end
dir.down do
Product.where(status: new_status).update_all(status: old_status)
change_column :products, :status, :string, default: old_status
end
end
end
end
# good
# Define `table_name` in a custom named class to make sure that you run on the
# same table you had during the creation of the migration.
# In future if you override the `Product` class and change the `table_name`,
# it won't break the migration or cause serious data corruption.
class MigrationProduct < ActiveRecord::Base
self.table_name = :products
end
class ModifyDefaultStatusForProducts < ActiveRecord::Migration
def change
old_status = 'pending_manual_approval'
new_status = 'pending_approval'
reversible do |dir|
dir.up do
MigrationProduct.where(status: old_status).update_all(status: new_status)
change_column :products, :status, :string, default: new_status
end
dir.down do
MigrationProduct.where(status: new_status).update_all(status: old_status)
change_column :products, :status, :string, default: old_status
end
end
end
end
Meaningful Foreign Key Naming
Name your foreign keys explicitly instead of relying on Rails auto-generated FK names. (https://guides.rubyonrails.org/active_record_migrations.html#foreign-keys)
# bad
class AddFkArticlesToAuthors < ActiveRecord::Migration
def change
add_foreign_key :articles, :authors
end
end
# good
class AddFkArticlesToAuthors < ActiveRecord::Migration
def change
add_foreign_key :articles, :authors, name: :articles_author_id_fk
end
end
Reversible Migration
Don’t use non-reversible migration commands in the change
method.
Reversible migration commands are listed below.
ActiveRecord::Migration::CommandRecorder
# bad
class DropUsers < ActiveRecord::Migration
def change
drop_table :users
end
end
# good
class DropUsers < ActiveRecord::Migration
def up
drop_table :users
end
def down
create_table :users do |t|
t.string :name
end
end
end
# good
# In this case, block will be used by create_table in rollback
# https://api.rubyonrails.org/classes/ActiveRecord/ConnectionAdapters.html#method-i-drop_table
class DropUsers < ActiveRecord::Migration
def change
drop_table :users do |t|
t.string :name
end
end
end
Views
No Direct Model View
Never call the model layer directly from a view.
No Complex View Formatting
Avoid complex formatting in the views. A view helper is useful for simple cases, but if it’s more complex then consider using a decorator or presenter.
Partials
Mitigate code duplication by using partial templates and layouts.
No Instance Variables in Partials
Avoid using instance variables in partials, pass a local variable to render
instead.
The partial may be used in a different controller or action, where the variable can have a different name or even be absent.
In these cases, an undefined instance variable will not raise an exception whereas a local variable will.
<!-- bad -->
<!-- app/views/courses/show.html.erb -->
<%= render 'course_description' %>
<!-- app/views/courses/_course_description.html.erb -->
<%= @course.description %>
<!-- good -->
<!-- app/views/courses/show.html.erb -->
<%= render 'course_description', course: @course %>
<!-- app/views/courses/_course_description.html.erb -->
<%= course.description %>
Internationalization
Locale Texts
No strings or other locale specific settings should be used in the views, models and controllers.
These texts should be moved to the locale files in the config/locales
directory.
Translated Labels
When the labels of an Active Record model need to be translated, use the activerecord
scope:
en: activerecord: models: user: Member attributes: user: name: 'Full name'
Then User.model_name.human
will return "Member" and User.human_attribute_name("name")
will return "Full name".
These translations of the attributes will be used as labels in the views.
Organize Locale Files
Separate the texts used in the views from translations of Active Record attributes.
Place the locale files for the models in a folder locales/models
and the texts used in the views in folder locales/views
.
When organization of the locale files is done with additional directories, these directories must be described in the application.rb
file in order to be loaded.
# config/application.rb
config.i18n.load_path += Dir[Rails.root.join('config', 'locales', '**', '*.{rb,yml}')]
Shared Localization
Place the shared localization options, such as date or currency formats, in files under the root of the locales
directory.
Short I18n
Use the short form of the I18n methods: I18n.t
instead of I18n.translate
and I18n.l
instead of I18n.localize
.
Lazy Lookup
Use "lazy" lookup for the texts used in views. Let’s say we have the following structure:
en: users: show: title: 'User details page'
The value for users.show.title
can be looked up in the template app/views/users/show.html.haml
like this:
= t '.title'
Dot-separated Keys
Use the dot-separated keys in the controllers and models instead of specifying the :scope
option.
The dot-separated call is easier to read and trace the hierarchy.
# bad
I18n.t :record_invalid, scope: [:activerecord, :errors, :messages]
# good
I18n.t 'activerecord.errors.messages.record_invalid'
I18n Guides
More detailed information about the Rails I18n can be found in the Rails Guides
Assets
Use the asset pipeline to leverage organization within your application.
Reserve app/assets
Reserve app/assets
for custom stylesheets, javascripts, or images.
lib/assets
Use lib/assets
for your own libraries that don’t really fit into the scope of the application.
gem/assets
When possible, use gemified versions of assets (e.g. jquery-rails, jquery-ui-rails, bootstrap-sass, zurb-foundation).
Mailers
Mailer Name
Name the mailers SomethingMailer
.
Without the Mailer suffix it isn’t immediately apparent what’s a mailer and which views are related to the mailer.
HTML Plain Email
Provide both HTML and plain-text view templates.
Enable Delivery Errors
Enable errors raised on failed mail delivery in your development environment. The errors are disabled by default.
# config/environments/development.rb
config.action_mailer.raise_delivery_errors = true
Local SMTP
Use a local SMTP server like Mailcatcher in development environment.
# config/environments/development.rb
config.action_mailer.smtp_settings = {
address: 'localhost',
port: 1025,
# more settings
}
Default Hostname
Provide default settings for the host name.
# config/environments/development.rb
config.action_mailer.default_url_options = { host: "#{local_ip}:3000" }
# config/environments/production.rb
config.action_mailer.default_url_options = { host: 'your_site.com' }
# in your mailer class
default_url_options[:host] = 'your_site.com'
Email Addresses
Format the from and to addresses properly. Use the following format:
# in your mailer class
default from: 'Your Name <info@your_site.com>'
Delivery Method Test
Make sure that the e-mail delivery method for your test environment is set to test
:
# config/environments/test.rb
config.action_mailer.delivery_method = :test
Delivery Method SMTP
The delivery method for development and production should be smtp
:
# config/environments/development.rb, config/environments/production.rb
config.action_mailer.delivery_method = :smtp
Inline Email Styles
When sending html emails all styles should be inline, as some mail clients have problems with external styles. This however makes them harder to maintain and leads to code duplication. There are two similar gems that transform the styles and put them in the corresponding html tags: premailer-rails and roadie.
Background Email
Sending emails while generating page response should be avoided. It causes delays in loading of the page and request can timeout if multiple email are sent. To overcome this emails can be sent in background process with the help of sidekiq gem.
Active Support Core Extensions
try!
Prefer Ruby 2.3’s safe navigation operator &.
over ActiveSupport#try!
.
# bad
obj.try! :fly
# good
obj&.fly
Active Support Aliases
Prefer Ruby’s Standard Library methods over ActiveSupport
aliases.
# bad
'the day'.starts_with? 'th'
'the day'.ends_with? 'ay'
# good
'the day'.start_with? 'th'
'the day'.end_with? 'ay'
Active Support Extensions
Prefer Ruby’s Standard Library over uncommon Active Support extensions.
# bad
(1..50).to_a.forty_two
1.in? [1, 2]
'day'.in? 'the day'
# good
(1..50).to_a[41]
[1, 2].include? 1
'the day'.include? 'day'
inquiry
Prefer Ruby’s comparison operators over Active Support’s Array#inquiry
, and String#inquiry
.
# bad - String#inquiry
ruby = 'two'.inquiry
ruby.two?
# good
ruby = 'two'
ruby == 'two'
# bad - Array#inquiry
pets = %w(cat dog).inquiry
pets.gopher?
# good
pets = %w(cat dog)
pets.include? 'cat'
exclude?
Prefer Active Support’s exclude?
over Ruby’s negated include?
.
# bad
!array.include?(2)
!hash.include?(:key)
!string.include?('substring')
# good
array.exclude?(2)
hash.exclude?(:key)
string.exclude?('substring')
Time
Time Zone Config
Configure your timezone accordingly in application.rb
.
config.time_zone = 'Eastern European Time'
# optional - note it can be only :utc or :local (default is :utc)
config.active_record.default_timezone = :local
Time.parse
Don’t use Time.parse
.
# bad
Time.parse('2015-03-02 19:05:37') # => Will assume time string given is in the system's time zone.
# good
Time.zone.parse('2015-03-02 19:05:37') # => Mon, 02 Mar 2015 19:05:37 EET +02:00
to_time
Don’t use String#to_time
# bad - assumes time string given is in the system's time zone.
'2015-03-02 19:05:37'.to_time
# good
Time.zone.parse('2015-03-02 19:05:37') # => Mon, 02 Mar 2015 19:05:37 EET +02:00
Time.now
Don’t use Time.now
.
# bad
Time.now # => Returns system time and ignores your configured time zone.
# good
Time.zone.now # => Fri, 12 Mar 2014 22:04:47 EET +02:00
Time.current # Same thing but shorter.
Duration
If used without a parameter, prefer from_now
and ago
instead of since
, after
, until
or before
.
# bad - It's not clear that the qualifier refers to the current time (which is the default parameter)
5.hours.since
5.hours.after
5.hours.before
5.hours.until
# good
5.hours.from_now
5.hours.ago
If used with a parameter, prefer since
, after
, until
or before
instead of from_now
and ago
.
# bad - It's confusing and misleading to read
2.days.from_now(yesterday)
2.days.ago(yesterday)
# good
2.days.since(yesterday)
2.days.after(yesterday)
2.days.before(yesterday)
2.days.until(yesterday)
Avoid using negative numbers for the duration subject. Always prefer using a qualifier that allows using positive literal numbers.
# bad - It's confusing and misleading to read
-5.hours.from_now
-5.hours.ago
# good
5.hours.ago
5.hours.from_now
Bundler
Dev/Test Gems
Put gems used only for development or testing in the appropriate group in the Gemfile.
Only Good Gems
Use only established gems in your projects. If you’re contemplating on including some little-known gem you should do a careful review of its source code first.
OS-specific Gemfile.lock
OS-specific gems will by default result in a constantly changing Gemfile.lock
for projects with multiple developers using different operating systems.
Add all OS X specific gems to a darwin
group in the Gemfile, and all Linux specific gems to a linux
group:
# Gemfile
group :darwin do
gem 'rb-fsevent'
gem 'growl'
end
group :linux do
gem 'rb-inotify'
end
To require the appropriate gems in the right environment, add the following to config/application.rb
:
platform = RUBY_PLATFORM.match(/(linux|darwin)/)[0].to_sym
Bundler.require(platform)
Gemfile.lock
Do not remove the Gemfile.lock
from version control.
This is not some randomly generated file - it makes sure that all of your team members get the same gem versions when they do a bundle install
.
Further Reading
There are a few excellent resources on Rails style, that you should consider if you have time to spare:
Contributing
Nothing written in this guide is set in stone. It’s my desire to work together with everyone interested in Rails coding style, so that we could ultimately create a resource that will be beneficial to the entire Ruby community.
Feel free to open tickets or send pull requests with improvements. Thanks in advance for your help!
You can also support the project (and RuboCop) with financial contributions via Patreon.
How to Contribute?
It’s easy, just follow the contribution guidelines below:
-
Make your feature addition or bug fix in a feature branch.
-
Include a good description of your changes
-
Push your feature branch to GitHub
-
Send a Pull Request
License
This work is licensed under a Creative Commons Attribution 3.0 Unported License
Spread the Word
A community-driven style guide is of little use to a community that doesn’t know about its existence. Tweet about the guide, share it with your friends and colleagues. Every comment, suggestion or opinion we get makes the guide just a little bit better. And we want to have the best possible guide, don’t we?
Cheers,
Bozhidar