CRypted Admin SHell
An SSH alternative featuring:
- IPv6 ready
- lightweight, straight forward and extensible protocol using TLS 1.3 or optionally DTLS 1.2 as transport layer
- man-in-the-middle safe due to its authentication mechanism which involves the servers host key into the auth process
- built-in traffic blinding against timing and packet-size info-leak attacks
- not relying on any system auth frameworks such as PAM
- can be entirely run as user, no need to setup config files
- passive/active connects on both ends with most flexible local/remote port binding possibilities
- easy to port to embedded systems such as routers
- quiet/hidden mode for secret administration and take-back functionality for owned boxes
- trigger-mode via syslog, mail or other files if requested
- emergency mode to extract all necessary key files from the running binary
- may be started as a CGI with all above functionality, command switches passed via query-string
- integrated tcp-wrapper-like D/DoS protection
- intentionally not passing local $ENV to remote to avoid info leaks
- supports Perfect Forward Secrecy via DH Kex
- can forward TCP and UDP sockets to remote
- SOCKS4 and SOCKS5 support to forward browser sessions to remote
- messenger proxy support
- proxying based on SNI
- SNI hiding mode
- can use UDP transport mode with DTLS and added reliability and flow-control layer
Build
Build requires OpenSSL version >= 1.1 or 3.0 or compatible LibreSSL (3.6.1 tested).
Inside the cloned git repo:
$ make -C src
On BSD systems you need to install GNU make and type gmake instead.
If you have a particular OpenSSL or LibreSSL setup, check the Makefile and
set the appropriate $SSL variable. crash builds also nicely with LibreSSL and BoringSSL.
For Android, edit the Makefile.android or Makefile.android.aarch64 to reflect
your NDK and BoringSSL install and use these. The build was tested with android-ndk-r17b.
On OSX you want to install OpenSSL via brew install [email protected] or by hand before make.
crash was successfully tested on Linux, FreeBSD, NetBSD, OpenSolaris, OSX and Android.
After that, to generate the required server and authentication keys:
$ make -C src keys
or see further instructions in this document. If you want to use ephemeral keying (aka PFS), invoke
$ cd src; ./newdh
before make in order to generate DH parameters before the build. Thats not strictly necessary
as of TLS 1.3, since the Kex will most likely chose one of the ECDH variants, but if you customize
your setup, it is recommended to generate your own DH params.
OpenSSL3 builds
The OpenSSL 3 API is quite different from the OpenSSL-1.1 API. In order to make
use of OpenSSL 3, you have to edit Makefile and newdh to reflect your path setup
for your OpenSSL install. Invoking newdh is mandatory, unlike for the 1.1 builds. After
that you just do make and everything should be the same as with 1.1.
proudly sponsored by:
Run
crash does not need any config or option files to run. Its easy and straight forward to use. Anything can be enabled/disabled by runtime switches:
stealth@linux ~> ./crashd -h
crypted admin shell (C) 2022 Sebastian Krahmer https://github.com/stealth/crash
Usage: ./crashc [-6] [-v] [-H host] [-p port] [-P local port] [-i auth keyfile]
[-K server key/s] [-c cmd] [-S SNI] [-D] [-X IP] [-U lport:[ip]:rport]
[-T lport:[ip]:rport] [-Y lport:SNI:[ip]:rport [-4 lport] [-5 lport]
[-R level] <-l user>
-6 -- use IPv6 instead of IPv4
-v -- be verbose
-H -- host to connect to; if omitted: passive connect (default)
-p -- port to connect/listen to; default is 2222
-P -- local port used in active connects (default is no bind)
-i -- private key used for authentication
-K -- folder of known host keys if it ends with '/';
absolute path of known-hosts file otherwise;
'none' to disable; default is .crash/
-c -- command to execute on remote host
-X -- run proxy on this IP (default 127.0.0.1)
-Y -- forward TLS port lport with SNI to ip:rport on remote site
-U -- forward UDP port lport to ip:rport on remote site
-T -- forward TCP port lport to ip:rport on remote site
-4 -- start SOCKS4 server on lport to forward TCP sessions
-5 -- start SOCKS5 server on lport to forward TCP sessions
-R -- traffic blinding level (0-6, default 1)
-D -- use DTLS transport (requires -S)
-S -- SNI to use
-l -- user to login as (no default!)
Most of it is pretty self-explaining. crashd can run as user. -U lets crashd
skip setuid() calls, effectively being able to run as user. In this case, it only accepts
logins to that user then by checking login name's uid against current euid.
Both, crashc and crashd can use active and passive connects. Whenever
a host-argument -H is given, it uses active connect to this host
and the belonging port -p. If -H is given, it also accepts
-P which specifies the local port it has to bind to before doing active connect.
Without -H it will listen for incoming connects. This way, from TCP view client
and server role may be reversed, while still having crashd as the shell server.
If -w is used it forks itself as [kthreadd] and tries to wrap around its
pid to be somewhere around the system daemons. As -w is overwriting main()'s argv array,
it must appear last in the option list, otherwise option processing will not work
correctly. You can set the process name as TITLE def inside the Makefile.
For testing, when you did make keys (next section), you can just run
src $ ./crashd -U -p 2222
and
src $ ./crashc -v -K none -i authkey.priv -H 127.0.0.1 -p 2222 -l $USER
Key setup
Unless you want to use SNI-hiding (see section below), you can type straight ahead:
$ make -C src keys
But you can also do it by hand. To generate a X509 certificate containing the server key:
$ umask 066
$ openssl genrsa -out serverkey.priv 4096
$ openssl req -new -x509 -nodes -sha1 -key serverkey.priv -out serverkey.pub
To extract the public key in a form crashc can use it as a hostkey for comparison:
$ openssl x509 -in serverkey.pub -pubkey -noout > HK_127.0.0.1
So you have HK_127.0.0.1 as the known-hosts keyfile for this host.
As an alternative, you can use crashc with -v upon connect to
extract the pubkey. But note that this might already be a key presented to
you during an attack. So only do that if you know that the connection is
not tampered with (e.g. single user on localhost).
Unless you use SNI hiding (see section below), the values you enter for Country-Name, Email, CN etc. do not matter since crashc is not validating the X509. It just compares the public key value it obtained from the server with the key it has in its local key-store belonging to that server (similar to SSH). The server key is not encrypted since crashd is usually started via init scripts. Instead, the key file must have proper permissions so only appropriate users can read it (mode 0600). You can, if you like, also encrypt the server key but then you have to enter a pass-phrase whenever crashd is started.
To generate a public/private RSA keypair for your authentication:
$ openssl genrsa -out authkey.priv -aes256 4096
$ openssl rsa -in authkey.priv -pubout -out authkey.pub
Copy authkey.pub to ~/.crash/authorized_keys on the remote box, and
use authkey.priv for the crashc -i argument. Note, that upon authentication
you will be asked for the pass-phrase to unlock your private key that is
stored locally. The pass-phrase will not travel the network.
Auth-Key sizes larger than 7500 bit must not be used; the tokens do not fit into the auth handshake otherwise.
crashc is using the .crash/ subdir by default to check for
already seen server keys. If you connect to a host via -H $host -p $port,
a keyfile of form .crash/HK_$host:$port is looked up unless you specify an
absolute path to a known keyfile.
Hostkeys
By default, crashc will compare server hostkeys to the local key cache
that is found inside the .crash/ subdir of CWD. You may override the path of the cache
folder by using the -K switch. For example by using -K ~/.crash/, you use the folder
inside your home directory. If the pathname does not end with a slash, it is treated as
a filename instead of a directory. If a cache directory is used instead of an
filename, each hostkey is expected to be found inside the folder as of the name HK_$HOST:$PORT
where $HOST is the -H argument and $PORT the -p argument. If using -v
the server hostkey will be printed on stderr and may be pasted to the cache folder
into the HK_$HOST:$PORT file.
Hostkey checking may be suppressed by using -K none.
The crash auth protocol incorporates the server host key when signing authentication
requests. This way its not strictly necessary to check server host keys as
you know it from SSH password authentication. Two things have to be considered
if host-key checks are suppressed with -K none though:
- The user-name will potentially leak to a MiM server
This is not an issue if you use a system user-name such as root.
- The MiM could sort of phish you, by showing you a fake-shell where
you think it belongs to your real server. This could be used to
wait for
suand similar commands and to record sensitive information as you type on the MiM shell.
To conquer this, you have to make sure you are indeed on your real shell
when you see the prompt. This can be achieved by echoing a secret token
to the tty upon login, for example via one of the .profile or .bashrc
files. As the MiM cannot know this token, you can be sure you have a
confidential and untampered session when you see this token upon login;
even if you omit the host-key check.
Term setup
As crashc is not transfering env vars to the remote side for a reason, keep in mind
that certain stuff is unset, such as $TERM. I.e. if you want to run an editor on the remote
shell and started crashc from within an xterm, you have to TERM=xterm vi file in order
to have a useful editing session. Likewise for other programs that you expect to work and
require specific environment setup.
CGI
crashd automatically detects whether it has been invoked as a CGI by
a web-server by checking QUERY_STRING environment variable. It parses
and converts the query-string into arguments it understands. It
does not translate %2F etc characters! They should not be needed,
since spaces, '(' and other weird characters do not make sense when
calling crashd. Arguments that don't have a parameter such as -U
have to be given =1 argument to enable it, such as in:
http://127.0.0.1/cgi-bin/crashd?-K=/path/to/serverkey.pem& \
-C=/path/to/pubkey.x509&-p=1234&-A=/tmp/.crash/authorized_keys&-U=1&-a=1
which invokes crashd on the host 127.0.0.1 as user (probably "wwwrun" or whatever the web-server is running as).
For pen-testing or for emergency case, crashd has the -e option.
If -e is used, it extracts the server key-file and the X509 certificate
from the ELF binary file, which have to be appended before using -e:
$ cat serverkey.priv>>crashd
$ cat serverkey.pub>>crashd
$ cat authkey.pub>>crashd
The order of appended keys is important.
If you give -A self instead of a valid authentication directory or file,
crashd also extracts the user-key used for authentication from its binary.
The keys are extracted from the binary at runtime and stored in temp files
of pattern /tmp/sshXXXXXX (/data/local/tmp/sshXXXXXX on Android).
Make sure to erase them securely upon last login, since they contain private keying
material.
This is useful in pen-tests where you cannot upload arbitrary amount of files or you do not know the exact pathname of the upload storage:
$ curl 'http://127.0.0.1/cgi-bin/crashd?-A=self&-U=1&-e=1&-a=1'
-a is needed since most likely the wwwrun user has a /bin/false shell,
which -a ignores.
crashd is using mkstemp() to store the key files temporarily (just see above), with
mode 0444 (world readable) since it needs to access authentication
files as user. So be warned that, if you have users, they may read
the private key used during SSL handshake. After all, its just an
emergency mode. Stripping the crashd binary is not possible after
appending the keys, or they will get lost.
Back-connect etc. also work in CGI mode as well.
If using that, client should use -K switch to tell client which key to use
to authenticate the server.
TCP and UDP port forward
crash uses the same network engine as psc. Therefore
you may use the same -U and -T parameters as known from psc and which are similar
to those of OpenSSH's -L parameter. It will bind to lport and will forward connections
to [ip]:rport, initiating the connection from the remote host. The same works for UDP
packets, which is not possible with SSH.
If you are interested in messenger proxy setups in copland countries, you can check contrib
folder.
SOCKS4 and SOCKS5 support
crash also supports forwarding of TCP connections via SOCKS4 (-4 port) and SOCKS5
(-5 port). This sets up port as SOCKS port for TCP connections, so for instance you
can browse remote networks via crashc sessions without the need to open any other
connection during a pen-test. For chrome, SOCKS4 must be used, as the crash SOCKS implementation
does not support resolving domain names on their own. Instead, it requires IPv4 or IPv6
addresses to be passed along. Since chrome will set the SOCKS5 protocol address type
always to domain name (0x03) - even if an IP address is entered in the address bar -
SOCKS5 is not usable with chrome. But you can use chrome with SOCKS4, since this
protocol only supports IPv4 addresses, not domain names.
proxying based on SNI
In some circumstances you might want to change the endpoint of the proxy session based
on a SNI that you receive in the TLS ClientHello. For convenience, crashc integrates
support for that by using -Y lport:SNI:[ip]:rport which listens on lport and forwards the
given SNI to ip:rport. A fallback of default SNI can be given so that any non-matches or
missing SNIs will be forwarded to that destination.
DTLS transport
crash allows to use all of its trickery above also on a DTLS 1.2 transport layer based
on UDP. I have added basic flow control and reliability, so you can even xfer files and use
port forwarding as with TLS 1.3. The reason for adding DTLS is that some countries have
TCP egress filters that only allow incoming connections. It is harder for censors to tell
which UDP packets establish an outgoing connection, as there is nothing like a "connection"
with UDP. With DTLS sessions, which are established by the -D switch on both sides, a SNI
is mandatory.
When forwarding UDP ports on DTLS sessions, make sure you will not send UDP payloads larger than
1320 bytes across the sockets, as it is necessary in UDP case to keep enough room for headers
and record layer without the need to fragment the packet, as DTLS honors packet boundaries
(there is nothing like a stream as in TCP, just datagrams).
DTLS mode is still experimental (although working stable) and will switch to DTLS 1.3 as soon
as it is implemented widely (DTLS 1.3 RFC was just finished 2022).
Mitigating traffic analysis
Traffic analysis mitigation has two goals. First, to make it hard to find out actual typing sequences and potential info leaks about whats being typed inside an encrypted, interactive channel. Second, to make it hard for a (semi-)global observer to track connections streams across packet mixes or hubs.
Completely mitigating traffic analysis for a capable (global) observer is very hard.
It would require many crash users so to sink all individual packets in a swarm and
make it impossible to find patterns that could be used to track individual users across
packet mixes. It would also require a fixed packet size for all packets as well as a
constant delay between the sends to make all connections look equal. Even then, there's
still the problem of the overall amount of traffic sent that may be measured and used
to track individuals. As having constant size and delays would make the connection
feel slow or even unusable, crash lets you choose between traffic policies which are
controlled by -R <value>. Value is an integer with the following meaning:
- 0: disable all padding of payloads and don't inject random traffic. The pure feeling!
- 1: pad payload to the next 256, 512, 1024 or 1320 byte boundary, no injects (default)
- 2: pad payload to the next 256, 512, 1024 or 1320 byte boundary, random injects client side
- 3: pad payload to the next 256, 512, 1024 or 1320 byte boundary, random injects with server responses
- 4: pad payload to 1320 byte boundary, no injects
- 5: pad payload to 1320 byte boundary, random injects client side
- 6: pad payload to 1320 byte boundary, random injects with server responses
1320 is crashds internally used MSS. The values were chosen in a way so that sent data fits most likely into a single packet. Note however that these are the packet sizes (plus the TLS record size) as it is passed to the TCP stack. TCP will decide itself how it will send the segments. There is no way to enforce 'TCP packet sizes', but this does not matter as the deps to the actual payload size is already blurred.
In DTLS mode there are always ping packets in order to implement synchronization and flow control.
If you live in a country with restrictive egress filtering, it may be helpful to test how long
connections can survive. Note that due to -4 and -U which allows to proxy TCP and UDP (DNS)
to a remote site, crash may be used as a shadowsocks alternative that requires
basically no setup and just needs a user-shell behind egress.
If you think that all of this is paranoia, go get some product sheets for devices that detect and classify SSH traffic by behavioral analysis.
Hiding by SNI
By default, the crashd will show a banner upon connect to tell the peer major and minor version
numbers. Censorship countries might block addresses which show banners they dislike. To combat this,
crash allows for a TLS-only mode that is indistinguishable from a HTTPS session. Just start
crashd with -S and give a semi-secret name (Server Name Indicator, SNI). Only clients that also
use the correct -S parameter will reach the gate for authentication at all. Other TLS sessions
will just be rejected. Note that the SNI travels the network in plain-text and that -S is not meant
for authentication. The only reason for SNI hiding is to hide the crash banner from probing/crawling.
You may also use SNI proxies such as sshttp to hide crash even
deeper and to forward all non-correct SNI connects to some web-site. This way you may hide your server
behind neutral web-sites from aggressively probing/blocking censors.
In order for probing to not reveal that you are running crash by checking the X509 certificate
details, you should use reasonable values for Country Name, City etc. when asked for it during
the make keys process. For instance it would make no sense to setup a pro-regime web-site
to hide behind and enter anti-regime values for the X509 specific naming.
File up/download
Although there is nothing like sftp for crash, it may be used for file up/downloads.
In order to upload a file:
~ $ crashc -H host -i authkey.priv -l root -c 'dd of=/path/on/remote status=progress' < local.file
Or to download a file:
~ $ crashc -H host -i authkey.priv -l root -c 'dd if=/path/on/remote status=progress' > local.file
Note that in the download case you must not specify the -v switch since this would add
the verbose output to the local.file. For -c commands, crash will forward stdout and
stderr separated to the local tty's fd 1 and 2, so above commands add a nice progress bar
during the xfer.
DoS mitigation
crashd includes some sort of D/DoS protection. Only one connection per second is allowed per IP, except if the IP is listed (or the network it belongs to) in a good-IP file given with -g at startup. Per default no good IPs are assigned. Network-address-goodness only works with IPv4 yet. A simple good-IP file may look like this:
# sample good-IP file
192.168.3.1
192.168.2.0
10.0.0.0
fe80:216::1234
# end of file
Together with the interval timer for hanging un-authenticated connections this allows to have no more than 12 'hanging' crashd's at the same time, still allowing you to login if you are listed in good-IPs and your underlying TCP/IP stack is not already trashed.