RP2040 PIO Emulator

An emulator of the RP2040 state machines. This emulator is not intended as a real-time emulation of the actual hardware, but as a handy tool for understanding how the PIO works and for testing and debugging when developing code for the PIO.

For detailed information, see the full docs on readthedocs.io

Motivation

What is the purpose of an RP2040 emulator if you can easily use the original? There are a number of good reasons for doing so:

• To be able to trace / single step a PIO program as an invaluable aid for developing and debugging, which is not easily possible directly on the RP2040 hardware.

• To inspect all of the PIO's internal state while developing and debugging a PIO program. This feature applies even to those parts of the PIO that are not accessible when running on real RP2040 hardware, such as:

  • the contents of PIO registers X, Y, ISR and OSR,

  • the current value of the ISR / OSR shift count or

  • the number of an instruction's pending delays.

  In contrast, the emulator has access to the PIO's complete internal logical state (otherwise, the emulation could not correctly work).

• To debug your PIO program in the context of your IDE: The emulator will typically run on your development host machine. That is, there is no need to upload the PIO program to a real RPI2040 for each and every tiny change, thus saving time and stress in the course of small and frequent development cycles.

• To be able to automatically generate detailed timing diagrams straight from an emulated run of a PIO program. Timing diagrams are highly useful for debugging as well as for documentation, as proof of concept or fact sheet. The selection of signals shown on the diagram is freely configurable.

• To be able to debug a PIO program even if there is no RP2040 hardware at hand. (Fun fact: The RP2040 is still sold out at all of the distributors easily accessible to me. That is, I still do not own an RP2040 of my own, but solely have to rely on the specs and other sources of documentation.)

• A motivation that applies to me personally: If I succeed in implementing a (more or less) correctly working emulation of the PIO, than I am somewhat confident that I have basically understood how the PIO works and what capabilities it has when it comes to writing PIO programs for it.

Current Features

• The core PIO emulator is already running, though it has not yet been extensively tested. That is, there are surely still many bugs in the emulation, such that emulation may behave wrong, especially for programs that use more exotic and therefore not well tested features of the PIO.

• The emulator can be used to automatically generate timing diagrams. However, configuration is still hard-wired in the source code (in the run() method of class org.soundpaint.rp2040pio.Main). With one of the next commits, flexible configuration and program loading will be made possible through a configuration file and/or via command line arguments, rather than having to recompile the source code of the emulator. Since there are surely still lots of bugs in the emulation, note that, as of now, the generated timing diagrams may be faulty as well.

Future Plans

A command line based monitor program will be provided to interactively:

• load programs,
• list (unassemble) program code,
• modify programs,
• start / stop / synchronize state machines,
• single step / trace into programs,
• define break points,
• inspect current contents of state machine registers, GPIO pins, FIFO registers, shift registers, etc.
• manipulate the current contents of registers and pins,
• generate timing diagrams,

and more.

Maybe, I will also provide a graphical user interface that depicts the internal state of the PIO in a graphical and more vivid manner.

• Support for interaction with the PIO's outer world. In particular:

  • Support specifying when and which logical values will be put onto the GPIO pins from an external source.

  • Support specifying when and which values will be shifted into the TX FIFO or shifted out from the RX FIFO via DMA access onto the PIO.

  • Support specifying when and which operations are triggered by DMA access onto the PIO memory-mapped registers.

  • Support specifying when and which instructions are inserted by DMA access onto the PIO memory-mapped SMx_INSTR registers.

  • Support specifying when an interrupt is requested by DMA access onto the PIO memory-mapped interrupt registers.

• Generate a warning whenever a race condition is detected. In particular, generate a warning when multiple state machines concurrently access the same resource, like writing simultaneously to the same GPIO pin. Warnings can be reported in the monitor program while debugging a program, as well as marked on the timing diagram.

• Generate a warning upon FIFO overflow / underflow.

• Generate a warning when reading from or writing to a GPIO pin that has pin direction that conflicts with the type of access.

• When generating a timing diagram, support alternative backends such as PDF or SVG.

• If an alternative backend for timing diagrams provides tooltips, add tooltips with additional info such as showing the complete instruction (with all of its parameters) when hovering over the instruction mnemonic in the timing diagram.

• Also add tooltips with descriptive / explanatory text for all warnings, where appropriate.