There are no reviews yet. Be the first to send feedback to the community and the maintainers!
NucleoTNC
The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3. It omits the battery charging and Bluetooth components of the TNC3. It presents as a KISS TNC over a USB serial port. This repository contains the build instructions, KiCAD schematics, and firmware source code.tnc1
Mobilinkd TNC1 Firmwaretnc3-firmware
Firmware for the Mobilinkd TNC3. STM32L433-based Bluetooth/LE KISS TNC.stm-morpho-template
KiCad Template for STM32 Nucleo-64 Expansion Boardsm17-cxx-demod
M17 Demodulator in C++ (GPL)m17-gnuradio
afsk-demodulator
Jupyter notebooks explaining AFSK demodulationm17-kiss-ht
An Android app for M17 voice communication via an M17 KISS modem/radio.tnc1-python-config
Python package for configuring the Mobilinkd TNCtnc4-firmware
TNC4 firmwarem17-demodulator
M17 Demodulator in Python (Jupyter Notebook)tnc1-android-config
Mobilinkd TNC Configuration App for Androiduv-k6-digital-mod
UV-K6 Mods for Digital Modulationafsk-demodulator-pynq
A series of tutorials & notebooks on migrating the AFSK Demodulator in Python to PYNQ.m17-pynq
M17 RF via FPGA for Zynq (Pynq Z2)iosTncConfig
TNC configuration app for iOSKenwoodTK-x90
Article, schematics, and models for the Kenwood TK-690, TK-790 and TK-890 radiostk-x90-basic-programmer
Models for the basic programmer connector for the Kenwood TK-x90 radiosserdes-rf-hdmi
HDMI test fixture for LVDS to single-ended SMA for RF testing.tnc2e-hardware
ffcx-skr-pro-mount
Mount to adapt the FlashForge Creator X Mightyboard mount to the BTT SKR Pro 1.1.gr-mobilinkd
GNU Radio Companion modulesm17-tnc3-python
Test app for interacting with the Mobilinkd TNC3 (and NucleoTNC) using M17 protocol over KISS.dac-pmod
pygattlib
Fork of https://bitbucket.org/OscarAcena/pygattlibNucleoTNC-KiCAD
KiCAD files for NucleoTNC PCB and EnclosureNucleo_RRC_Filter
RRC Filter for M17 on an STM32L432KC Nucleo32 BoardSTM32CubeMonitor
Container build for STM32CubeMonitorMotorolaSM50
Using the Motorola Radius SM50 / SM120 for amateur packet radioblepty
Create a PTY interface for an HM-1x Bluetooth LE module on Linux.mobilinkd
m17-practicum
Practicum: a practical section of a course of study. Transmitting and receiving M17.tk-x90-programmer-pcb
This is a programmer for the Kenwood TK-x90 series radios.stm32L432kc-nucleo32-demo
SRAM2 Demo on STM32L452KC Nucleo-32 Board (no fault)ffcx-tft35-v3-mount
This is a mounting bracket for the FlashForge Creator X used for the BTT TFT35 V3.tk-x90-mic-connector-housing
This is a microphone connector housing for the Kenwood TK-x90 series radios.lvds-pmod
Love Open Source and this site? Check out how you can help us