mkgeiger/mqtt-geiger-counter

Stars
1
Language
C++
Created almost 4 years ago
Updated over 1 year ago

mkgeiger/mqtt-geiger-counter

mkgeiger

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

This project is based on my older Geiger Counter project on the same hardware. It converts the hardware in an MQTT client.

astro-tracker

equatorial mount stepper motor controller with GPS high precision star-, moon- and sun-tracking, Skysafari server for GOTO and Webinterface for stepper motor settings on an ESP32 microcontroller

matrix-weather-clock

Matrix Weather Clock on an ESP8266 microcontroller

mqtt-broker

setting up a local mqtt broker on raspberry-pi with mosquitto and node-red

geiger-counter-iot

Geiger Mueller counter for IoT on an ESP8266 microcontroller

node-red-sma

Control new generation of SMA inverters and home managers (e.g. Sunny HomeManager 2.0, Sunny Tripower X.0SE, etc.) from Node-Red

rpi-weather-clock

Dashboard for Raspberry Pi with display to show environmental data like weather information, weather forecast, indoor climate, power and energy consumption, etc.

ddns-updater

Cyclic update the WAN-IP with a DDNS provider

mqtt-plug

Modification of the Luminea ZX-2820 plug to run with an own MQTT client

mqtt-dimmer

MQTT 230V AC LED dimmer, based on a commercial dimmer with an ESP8266

mqtt-indoor-climate

This is an ESP8266 based MQTT client which measures indoor climate data via the Bosch BME680 sensor

mqtt-outdoor-climate

this is a battery powered esp8266 based MQTT client which measures climate data

mqtt-ww-led-controller

MQTT contoller for Warm White and Cold White LED stripes, based on a commercial ESP8266 product

mqtt-rgbw-led-controller

MQTT contoller for RGBW LED stripes, based on a commercial ESP8266 product

li-ion-battery-18v-to-14.4v-converter

Convert Li-ion 18V (5s) battery to Ni-Mh or Ni-Cd 14.4V for the usage in older power tools