Luassert
luassert extends Lua's built-in assertions to provide additional tests and the ability to create your own. You can modify chains of assertions with not.
Check out busted for extended examples.
assert = require("luassert")
assert.True(true)
assert.is.True(true)
assert.is_true(true)
assert.is_not.True(false)
assert.is.Not.True(false)
assert.is_not_true(false)
assert.are.equal(1, 1)
assert.has.errors(function() error("this should fail") end)Extend your own:
local assert = require("luassert")
local say = require("say") --our i18n lib, installed through luarocks, included as a luassert dependency
local function has_property(state, arguments)
local property = arguments[1]
local table = arguments[2]
for key, value in pairs(table) do
if key == property then
return true
end
end
return false
end
say:set_namespace("en")
say:set("assertion.has_property.positive", "Expected property %s in:\n%s")
say:set("assertion.has_property.negative", "Expected property %s to not be in:\n%s")
assert:register("assertion", "has_property", has_property, "assertion.has_property.positive", "assertion.has_property.negative")
assert.has_property("name", { name = "jack" })
When writing your own assertions you can also use modifiers to set specific objects to work against. An example
is the array modifier with its
accompanying holes assertion.
Which can be used as;
local arr = { "one", "two", "three" }
assert.array(arr).has.no.holes() -- checks the array to not contain holes --> passes
assert.array(arr).has.no.holes(4) -- sets explicit length to 4 --> failsImplementation notes:
- assertion/modifiers that are Lua keywords (
true,false,nil,function, andnot) cannot be used using '.' chaining because that results in compilation errors. Instead chain using '_' (underscore) or use one or more capitals in the reserved word (see code examples above), whatever your coding style prefers - Most assertions will only take 1 or 2 parameters and an optional failure message, except for the
returned_argumentsassertion, which does not take a failure message - To specify a custom failure message for the
returned_argumentsassertion, use themessagemodifier
local f = function() end
assert.message("the function 'f' did not return 2 arguments").returned_arguments(2, f())Matchers
Argument matching can be performed on spies/stubs with the ability to create your own. This provides flexible argument matching for called_with and returned_with assertions. Like assertions, you can modify chains of matchers with not. Furthermore, matchers can be combined using composite matchers.
local assert = require 'luassert'
local match = require 'luassert.match'
local spy = require 'luassert.spy'
local s = spy.new(function() end)
s('foo')
s(1)
s({}, 'foo')
assert.spy(s).was.called_with(match._) -- arg1 is anything
assert.spy(s).was.called_with(match.is_string()) -- arg1 is a string
assert.spy(s).was.called_with(match.is_number()) -- arg1 is a number
assert.spy(s).was.called_with(match.is_not_true()) -- arg1 is not true
assert.spy(s).was.called_with(match.is_table(), match.is_string()) -- arg1 is a table, arg2 is a string
assert.spy(s).was.called_with(match.has_match('.oo')) -- arg1 contains pattern ".oo"
assert.spy(s).was.called_with({}, 'foo') -- you can still match without using matchersExtend your own:
local function is_even(state, arguments)
return function(value)
return (value % 2) == 0
end
end
local function is_gt(state, arguments)
local expected = arguments[1]
return function(value)
return value > expected
end
end
assert:register("matcher", "even", is_even)
assert:register("matcher", "gt", is_gt)local assert = require 'luassert'
local match = require 'luassert.match'
local spy = require 'luassert.spy'
local s = spy.new(function() end)
s(7)
assert.spy(s).was.called_with(match.is_number()) -- arg1 was a number
assert.spy(s).was.called_with(match.is_not_even()) -- arg1 was not even
assert.spy(s).was.called_with(match.is_gt(5)) -- arg1 was greater than 5Composite matchers have the form:
match.all_of(m1, m2, ...) -- argument matches all of the matchers m1 to mn
match.any_of(m1, m2, ...) -- argument matches at least one of the matchers m1 to mn
match.none_of(m1, m2, ...) -- argument does not match any of the matchers m1 to mnIf you're creating a spy for methods that mutate any properties on self you should should use match.is_ref(obj):
local t = { cnt = 0, }
function t:incrby(i) self.cnt = self.cnt + i end
local s = spy.on(t, "incrby")
t:incrby(2)
assert.spy(s).was_called_with(match.is_ref(t), 2)Snapshots
To be able to revert changes created by tests, inserting spies and stubs for example, luassert supports 'snapshots'. A snapshot includes the following;
- spies and stubs
- parameters
- formatters
Example:
describe("Showing use of snapshots", function()
local snapshot
before_each(function()
snapshot = assert:snapshot()
end)
after_each(function()
snapshot:revert()
end)
it("does some test", function()
-- spies or stubs registered here, parameters changed, or formatters added
-- will be undone in the after_each() handler.
end)
end)Parameters
To register state information 'parameters' can be used. The parameter is included in a snapshot and can hence be restored in between tests. For an example see Configuring table depth display below.
Example:
assert:set_parameter("my_param_name", 1)
local s = assert:snapshot()
assert:set_parameter("my_param_name", 2)
s:revert()
assert.are.equal(1, assert:get_parameter("my_param_name"))Customizing argument formatting
luassert comes preloaded with argument formatters for common Lua types, but it is easy to roll your own. Customizing them is especially useful for limiting table depth and for userdata types.
Configuring table depth display
The default table formatter allows you to customize the levels displayed by setting the TableFormatLevel parameter (setting it to -1 displays all levels).
Example:
describe("Tests different levels of table display", function()
local testtable = {
hello = "hola",
world = "mundo",
liqour = {
"beer", "wine", "water"
},
fruit = {
native = { "apple", "strawberry", "grape" },
tropical = { "banana", "orange", "mango" },
},
}
it("tests display of 0 levels", function()
assert:set_parameter("TableFormatLevel", 0)
assert.are.same(testtable, {})
end)
it("tests display of 2 levels", function()
assert:set_parameter("TableFormatLevel", 2)
assert.are.same(testtable, {})
end)
end)Will display the following output with the table pretty-printed to the requested depth:
Failure: ...ua projects\busted\formatter\spec\formatter_spec.lua @ 45
tests display of 0 levels
...ua projects\busted\formatter\spec\formatter_spec.lua:47: Expected objects to be the same. Passed in:
(table): { }
Expected:
(table): { ... more }
Failure: ...ua projects\busted\formatter\spec\formatter_spec.lua @ 50
tests display of 2 levels
...ua projects\busted\formatter\spec\formatter_spec.lua:52: Expected objects to be the same. Passed in:
(table): { }
Expected:
(table): {
[hello] = 'hola'
[fruit] = {
[tropical] = { ... more }
[native] = { ... more } }
[liqour] = {
[1] = 'beer'
[2] = 'wine'
[3] = 'water' }
[world] = 'mundo' }
Customized formatters
The formatters are functions taking a single argument that needs to be converted to a string representation. The formatter should examine the value provided, if it can format the value, it should return the formatted string, otherwise it should return nil.
Formatters can be added through assert:add_formatter(formatter_func), and removed by calling assert:remove_formatter(formatter_func).
Example using the included binary string formatter:
local binstring = require("luassert.formatters.binarystring")
describe("Tests using a binary string formatter", function()
setup(function()
assert:add_formatter(binstring)
end)
teardown(function()
assert:remove_formatter(binstring)
end)
it("tests a string comparison with binary formatting", function()
local s1, s2 = "", ""
for n = 65,88 do
s1 = s1 .. string.char(n)
s2 = string.char(n) .. s2
end
assert.are.same(s1, s2)
end)
end)Because this formatter formats string values, and is added last, it will take precedence over the regular string formatter. The results will be:
Failure: ...ua projects\busted\formatter\spec\formatter_spec.lua @ 13
tests a string comparison with binary formatting
...ua projects\busted\formatter\spec\formatter_spec.lua:19: Expected objects to be the same. Passed in:
Binary string length; 24 bytes
58 57 56 55 54 53 52 51 50 4f 4e 4d 4c 4b 4a 49 XWVUTSRQ PONMLKJI
48 47 46 45 44 43 42 41 HGFEDCBA
Expected:
Binary string length; 24 bytes
41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 ABCDEFGH IJKLMNOP
51 52 53 54 55 56 57 58 QRSTUVWX