Manage declarative NixOS containers like imperative containers, without system rebuilds.
Each declarative container adds a full system module evaluation to every NixOS rebuild, which can be prohibitively slow for systems with many containers or when experimenting with single containers.
On the other hand, the faster imperative containers lack the full range of options of declarative containers. This tool brings you the best of both worlds.
sudo extra-container create --start <<'EOF'
{
containers.demo = {
privateNetwork = true;
hostAddress = "10.250.0.1";
localAddress = "10.250.0.2";
config = { pkgs, ... }: {
systemd.services.hello = {
wantedBy = [ "multi-user.target" ];
script = ''
while true; do
echo hello | ${pkgs.netcat}/bin/nc -lN 50
done
'';
};
networking.firewall.allowedTCPPorts = [ 50 ];
};
};
}
EOF
curl --http0.9 10.250.0.2:50 # Returns 'hello' from the container
# Now change the 'hello' string in the container definition to something
# else and re-run the `extra-container create --start` command.
# The container is automatically updated via NixOS' `switch-to-configuration`.
# The container is a regular container that can be controlled
# with nixos-container
nixos-container status demo
# Remove the container
sudo extra-container destroy democfg='{
containers.demo.config = {
networking.hostName = "hello";
};
}'
extra-container shell -E "$cfg" --run c hostname # => helloAdd programs.extra-container.enable = true to your configuration.
Import extra-container.nixosModules.default in your configuration.
git clone https://github.com/erikarvstedt/extra-container
# Calls sudo during install
extra-container/util/install.shinstall.sh installs extra-container to the root nix user profile
and edits /etc/sudoers to enable running extra-container with sudo.
Command shell starts a container shell session.
The shell provides helper functions for interacting with the container. The container is destroyed when exiting the shell.
This config uses extra options that are explained below.
read -d '' src <<'EOF' || :
{
containers.demo = {
extra.addressPrefix = "10.250.0"; # Sets up a private network.
extra.enableWAN = true;
};
}
EOF
# Provide container config via `-E` instead of stdin because the shell's stdin
# should be connected to the terminal.
extra-container shell -E "$src" --sshextra-container automatically runs itself via sudo when called as a non-root user.
An example shell session
...
Starting shell.
Enter "h" for documentation.
$ h
Container address: 10.250.0.2 ($ip)
Container filesystem: /var/lib/nixos-containers/demo
Run "c COMMAND" to execute a command in the container
Run "c" to start a shell session inside the container
Run "cssh" for SSH
# Container internet access, enabled via option `extra.enableWAN`
$ c curl example.com
<!doctype html>
<html>
...
# Connect with SSH, enabled by `--ssh`
$ cssh hostname
demo
Run a command in a shell session and exit. The container is destroyed afterwards.
cfg='{ containers.demo = {}; }'
extra-container shell -E "$cfg" --run c hostname
# => demoStart a shell inside the container.
cfg='{ containers.demo = {}; }'
extra-container shell -E "$cfg" --run cWhen extra-container shell detects that it is already running in a container shell
session, it updates the running container instead of destroying and restarting it and
starting a new shell.
To prevent sudo from clearing the environment variables that are needed for shell
detection, call extra-container without sudo.
extra-container will automatically run itself via sudo only when it is first
called as a non-root user outside of a shell session.
To force container destruction inside a shell session, use extra-container shell --destroy|-d.
By default, shell destroys the shell container before starting and before exiting.
This ensures that containers start with no leftover filesystem state from
previous runs and that containers do not consume system resources after use.
To disable auto-destructing containers, run
extra-container shell --no-destroy|-n
Container options extra.* are defined by extra-container and help with setting up private network containers.
See eval-config.nix for full option descriptions.
containers.demo = {
extra = {
# Sets
# privateNetwork = true
# hostAddress = "${addressPrefix}.1"
# localAddress = "${addressPrefix}.2"
addressPrefix = "10.250.0";
# Enable internet access for the container
enableWAN = true;
# Always allow connections from hostAddress
firewallAllowHost = true;
# Make the container's localhost reachable via localAddress
exposeLocalhost = true;
}
};extra-container appends pwd to NIX_PATH to allow configs given via --expr|-E
or via stdin to access the working directory.
extra-container create -E '{ imports = [ <pwd/myfile.nix> ]; ... }'See examples/flake.
extra-container create <container-config-file>
[--attr|-A attrPath]
[--nixpkgs-path|--nixos-path path]
[--start|-s | --restart-changed|-r]
[--ssh]
[--build-args arg...]
<container-config-file> is a NixOS config file with container
definitions like 'containers.mycontainer = { ... }'
--attr | -A attrPath
Select an attribute from the config expression
--nixpkgs-path
A nix expression that returns a path to the nixpkgs source
to use for building the containers
--nixos-path
Like '--nixpkgs-path', but for directly specifying the NixOS source
--start | -s
Start all created containers
Update running containers that have changed or restart them if '--restart-changed' was specified
--update-changed | -u
Update running containers with a changed system configuration by running
'switch-to-configuration' inside the container.
Restart containers with a changed container configuration
--restart-changed | -r
Restart running containers that have changed
--ssh
Generate SSH keys in /tmp and enable container SSH access.
The key files remain after exit and are reused on subsequent runs.
Unlocks the function 'cssh' in 'extra-container shell'.
Requires container option 'privateNetwork = true'.
--build-args arg...
All following args are passed to nix-build.
Example:
extra-container create mycontainers.nix --restart-changed
extra-container create mycontainers.nix --nixpkgs-path \
'fetchTarball https://nixos.org/channels/nixos-unstable/nixexprs.tar.xz'
extra-container create mycontainers.nix --start --build-args --builders 'ssh://worker - - 8'
echo <container-config> | extra-container create
Read the container config from stdin
Example:
extra-container create --start <<EOF
{ containers.hello = { enableTun = true; config = {}; }; }
EOF
extra-container create --expr|-E <container-config>
Provide container config as an argument
extra-container create <store-path>
Create containers from <store-path>/etc
Examples:
Create from nixos system derivation
extra-container create /nix/store/9h..27-nixos-system-foo-18.03
Create from nixos etc derivation
extra-container create /nix/store/32..9j-etc
extra-container shell ...
Start a container shell session.
See the README for a complete documentation.
Supports all arguments from 'create'
Extra arguments:
--run <cmd> <arg>...
Run command in shell session and exit
Must be the last option given
--no-destroy|-n
Do not destroy shell container before and after running
--destroy|-d
If running inside an existing shell session, force container to
be destroyed before and after running
Example:
extra-container shell -E '{ containers.demo.config = {}; }'
extra-container build ...
Build the container config and print the resulting NixOS system etc path
This command can be used like 'create', but options related
to starting are not supported
extra-container list
List all extra containers
extra-container restart <container>...
Fixes the broken restart command of nixos-container (nixpkgs issue #43652)
extra-container destroy <container-name>...
Destroy containers
extra-container destroy <args for create/shell>...
Destroy the containers defined by the args for command `create` or `shell` (see above).
For this to work, the first arg after `destroy` must start with one of the
following three characters: ./-
Example:
extra-container destroy ./containers.nix
extra-container destroy --all|-a
Destroy all extra containers
extra-container <cmd> <arg>...
All other commands are forwarded to nixos-container
The script works like this: Take a NixOS config with container definitions and build
the system's config.system.build.etc derivation. Because we're not building a full
system we can use a reduced module set (eval-config.nix) to improve evaluation
performance.
Now link the container files from the etc derivation to the main system, like so:
nixos-system/etc/systemd/system/[email protected] -> /etc/systemd-mutable/system
nixos-system/etc/containers/CONTAINER.conf -> /etc/containers (system.stateVersion < 22.05)
-> /etc/nixos-containers (system.stateVersion ≥ 22.05)
Finally, add gcroots pointing to the linked files.
All contributions and suggestions are welcome, even if they're minor or cosmetic.
Run nix develop in the project root directory to start a development shell.
Within the shell, you can run extra-container from the local
source via command extra-container.
When changing the Usage documentation in extra-container, run make doc to copy
these changes to README.md.
Run make to run the tests.
The following tests are executed:
-
Main test suite
Can be run manually via
sudo run-tests-in-container.sh.
This script creates a temporary container namedtest-extra-containerin which the main test scripttest.shis run.
test.shadds and removes temporary containers namedtest-*on the host system. It can also be called directly, but wrapping it withrun-tests-in-container.shhelps reducing interference with your main system. -
VM test
Can be run manually via
nix build .#test.
This is a basic test using the NixOS VM test framework. It is built as a Nix derivation, which makes it independent from the system environment.For debugging the VM, run
nix run .#debugTestto start a Python test driver shell inside the VM. -
nix flake checkEvaluates all flake outputs and builds the VM test.
Run nix run .#vm to start a VM where extra-container is installed.
This provides an isolated and reproducible testing environment.