Calimero-core

git clone https://github.com/calimero-project/calimero-core.git

Calimero-core provides (secure) KNX communication protocols, KNX datapoint & property access, and management functionality. JDK 17 (java.base) is the minimum required runtime environment. Calimero was developed with a focus on applications that run on embedded devices and require a small footprint.

Code examples for using this library are shown in the introduction.

Changes with Calimero v3 snapshots

Supported Features

Access Protocols

• KNX IP Secure
  • Discovery and Self-description
  • Tunneling
  • Multicast (example of creating a secure network link)
  • Busmonitor
  • Device Management
• KNXnet/IP
  • Discovery and Self-description
  • Tunneling
  • Routing
  • Busmonitor
  • Device Management
• KNX IP
• KNX RF USB
• KNX USB
• KNX FT1.2 protocol (serial connections using EMI2 or cEMI)
• TP-UART (access TP1 networks over serial connections)
• BAOS (Bus Access und Object Server)

Process Communication

• DPT encoding/decoding of Java/KNX data types
• Process Communicator client
• Group Monitor
• KNX Data Secure

Supported Datapoint Types (DPTs)

• 1.x - Boolean, e.g., Switch, Alarm
• 2.x - Boolean controlled, e.g., Switch Controlled, Enable Controlled
• 3.x - 3 Bit controlled, e.g., Dimming, Blinds
• 5.x - 8 Bit unsigned value, e.g., Scaling, Tariff information
• 6.x - 8 Bit signed value, e.g., Percent (8 Bit), Status with mode
• 7.x - 2 octet unsigned value, e.g., Unsigned count, Time period
• 8.x - 2 octet signed value, e.g., Percent, Delta time seconds
• 9.x - 2 octet float value, e.g., Temperature, Humidity
• 10.x - Time
• 11.x - Date
• 12.x - 4 octet unsigned value
• 13.x - 4 octet signed value, e.g., Counter pulses, Active Energy
• 14.x - 4 octet float value, e.g., Acceleration, Electric charge
• 16.x - String, e.g., ASCII string, ISO-8859-1 string (Latin 1)
• 17.x - Scene number
• 18.x - Scene control
• 19.x - Date with time
• 20.x - 8 Bit enumeration, e.g., Occupancy Mode, Blinds Control Mode
• 21.x - Bit array of length 8, e.g., General Status, Room Heating Controller Status, 8-bit Cannel Activation
• 22.x - Bit array of length 16, implemented are DHW Controller Status, RHCC Status, Media Type, 16-bit Channel Activation
• 28.x - UTF-8 string
• 29.x - 64 Bit signed value, e.g., Active Energy, Apparent energy
• 229.001 - M-Bus metering value, with the various M-Bus VIF/VIFE codings
• 232.x - RGB color value
• 242.600 - xyY color
• 243.600 - color transition xyY
• 249.600 - brightness & color temperature transition
• 250.600 - brightness & color temperature control
• 251.600 - RGBW color
• 252.600 - relative control RGBW
• 253.600 - relative control xyY
• 254.600 - relative control RGB

Network Monitor / Busmonitor

Access via KNXnet/IP, KNX USB, KNX RF USB, TP-UART, and FT1.2

Raw Frame Decoding

• TP1
• KNX IP
• PL110
• RF

Management

• KNX Management Layer
• KNX Management Procedures
• cEMI Local Device Management
• KNX Data Secure

EMI Support

• cEMI standard and extend L-Data
• cEMI Busmonitor
• cEMI Device Management
• EMI1/2 standard L-Data
• EMI1/2 Busmonitor

Network Buffer

• State/command-based datapoint buffer to answer .reqs, buffer incoming .ind updates

Logging

Calimero uses the System.Logger. Bind any desired logging frameworks of your choice.

Testing

For unit tests, Calimero provides a test network consisting of a KNXnet/IP server and a virtual KNX network with two KNX devices. The complete test network is implemented in software, and can be executed in any J2SE runtime environment. The network provides the remote KNXnet/IP endpoint for executing unit tests for KNXnet/IP tunneling, busmonitoring, routing, device management, and KNX IP protocols. The same network setup is used for Calimero Travis CI.

Start the test network (gradle run) in the directory "calimero-core/test/testnetwork-launcher" before running any KNXnet/IP or KNX IP tests. When using Gradle, KNXnet/IP tests can be excluded via useJUnitPlatform() { excludeTags 'knxnetip' }.

Currently, the TP-UART and FT1.2 protocols can only be tested if the corresponding hardware is available.

More Features, Tools, Examples

• introduction provides code examples in Java and Kotlin for programming with Calimero.
• calimero-tools offers command-line tools for (secure) KNX process communication, monitoring, and management, BAOS communication, and ETS 5 datapoint import.
• calimero-gui provides a graphical user interface (based on SWT) for (secure) process communication, monitoring, and management.
• calimero-server is the Calimero KNXnet/IP Server and provides KNXnet/IP (Secure) access to KNX networks.
• calimero-device is the communication stack to implement a KNX device.
• serial-native provides native libraries for serial port access (using JNI) on Windows, Linux, and MacOS.
• import-ets-xml imports ETS XML KNX datapoints for use with Calimero (ETS 5.7 and later is not supported, use calimero-tools).