Display Manager

An open-source Python library which can modify your Mac's display settings.

Includes the library itself, and a command-line API + GUI to use it in pre-specified ways.

Contents

• Download
• Contact - how to reach us
• System Requirements - what you need
• Purpose - what can be done with Display Manager?
• Limitations - what can't be done with Display Manager?
• Get Started - how to get started with Display Manager
• Overview - what is included in this library?
  • Library
  • Command-Line API
  • GUI
• Command-Line Usage - how to use the command-line API
  • Help
  • Show
  • Res
  • Rotate
  • Brightness
  • Underscan
  • Mirror
• Usage Examples - potential use cases for Display Manager
  • Library Examples
  • Command-Line Examples
  • System Administration Examples
• Update History

Download

The latest release is available for download here.

Contact

If you have any comments, questions, or concerns, feel free to send us an email.

System Requirements

Display Manager only runs on Mac computers. It depends on the Apple-supplied Python 2.7 binary, which lives at /usr/bin/python and comes pre-configured with the PyObjC bindings. These bindings allow Python to access the Objective-C methods that perform display manipulations.

If you have replaced the setDefault /usr/bin/python binary (which is not generally advised), you should ensure that it has the PyObjC bindings set up correctly.

Note: Display Manager has only been tested on El Capitan (10.11), Sierra (10.12), High Sierra (10.13), and Mojave Beta (10.14). If you experience issues on other versions of macOS, please let us know.

Purpose

Display Manager programmatically manages Mac displays, including display resolution, refresh rate, rotation, brightness, screen mirroring, and HDMI underscan. Its primary intended purpose is to allow system administrators and developers to automatically configure any number of Mac displays, by use of the command-line scripts and the Display Manager Python library.

Several intended use-cases for Display Manager are elaborated in usage examples.

Limitations

Currently, Display Manager has a few important limitations that are worth noting:

• Must be currently logged in as the user of the current Aqua Session to use Display Manager (and in cases when there is no such user (e.g. the login screen), Display Manager cannot be used).

Recommended workarounds:

• Transfer CoreGraphics control to the desired user via $ sudo /System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/CGSession -switchToUserID <UID>, where <UID> is the user ID of the desired user.
• Switch to the user of the current Aqua Session via $ su <user>, where <user> is the user of the current Aqua Session.
• Simply configure displays during login/logout, or while logged in. Settings persist after logout, so whichever configurations you set during logout will remain active at the login screen.

Get Started

First, check that your system satisfies the requirements in System Requirements. If you haven't touched /usr/bin/python, it should.

Next, download the latest installer here. Included within are two files: Display Manager.pkg, and Uninstall Display Manager.pkg. To install, click the former and follow the prompts on-screen; to uninstall, do the same for the latter.

For the curious: Display Manager.pkg puts the Display Manager library in /Library/Python/2.7/site-packages/, and the command-line interface in /usr/local/bin. (Note: currently, if you wish to use the GUI, you must manually run gui.py from the command line. Standalone app in /Applications coming in a future version.)

Next, see Overview for an idea of what you can do with Display Manager.

Overview

The Display Manager suite comes in 3 parts: the Display Manager library (display_manager_lib.py), the command-line API (display_manager.py), and the GUI (gui.py).

Library

The Display Manager library is housed in display_manager_lib.py, which contains the following:

• Classes:

  • The Display class is a virtual representation of a connected physical display. It allows one to check the status of various display parameters (e.g. brightness, resolution, rotation, etc.) and to configure such parameters.
  • The DisplayMode class is a simple representation of Quartz's Display Modes. DisplayModes can be sorted, converted to strings, and passed as parameters to various methods which configure the display.

• Functions:

  • getMainDisplay returns the primary Display;
  • getAllDisplays returns a Display for each connected display
  • getIOKit allows one to manually access the IOKit functions and constants used in Display Manager (usage not recommended -- it's much simpler to go through Displays instead, if possible)

Command-Line API

The command-line API, accessed via display_manager.py, allows you to manually set display resolution, refresh rate, brightness, rotation, screen mirroring, and HDMI underscan. See command-line usage below for more information.

GUI

First, set the display you'd like to configure the settings for in the displays dropdown menu. Any time you select a display, all of the other menus automatically switch to that display's current settings, but you can refresh them manually by clicking the "refresh" button.

Next, select the display settings you'd like from the other menus. Note that the brightness, rotation, and underscan sliders default to 0 and cannot be changed if your display does not allow us to access them.

To configure screen mirroring, select the display you'd like to mirror, and choose whether to enable or disable it.

Finally, select either "Set Display" or "Build Script". If you click "Set Display", the display will be configured to the settings you've selected. If you pick "Build Script", you'll be given a file dialog to save a script which sets your display to these settings automatically whenever run (using the commands seen in display_manager.py).

Command-Line Usage

The Display Manager command-line API supports the following commands:

$ display_manager.py [command]

For more information on each command, see its section below:

Help

Use help to see help documentation for any command.

Usage: $ display_manager.py help <command>

Examples

• Show help information for the res command:

$ display_manager.py help res

• Show general help information to see which commands are available:

$ display_manager.py help

Show

Use show to learn more about the supported display configurations for your hardware.

Usage: $ display_manager.py show [subcommand] [options] [scope...]

Notes:

• "HiDPI" , also known as "Retina Display" among Apple products, refers to a high ratio of pixels (or "dots" in "dots per inch"/"DPI") to the physical area they occupy in a display. Fore more information, see here
• By default, both HiDPI and non-HiDPI resolutions are shown.

Examples

• Show all displays' current configurations:

$ display_manager.py show or $ display_manager.py show all

• Show the main display's default configuration:

$ display_manager.py show default main

• Show the highest configuration for the first external display:

$ display_manager.py show highest ext0

• Show all available HiDPI configurations for all displays:

$ display_manager.py show available only-hidpi or $ display_manager.py show available only-hidpi all

Res

Use res to modify display resolution and refresh rate. (Checking desired configuration through show beforehand is recommended.)

usage: $ display_manager.py res <resolution> [refresh] [options] [scope...]

Note: width and height must be separated by at least one space.

Note: if refresh rate is not specified, it will default to whichever rate is available at the desired resolution.

Notes:

• "HiDPI" , also known as "Retina Display" among Apple products, refers to a high ratio of pixels (or "dots" in "dots per inch"/"DPI") to the physical area they occupy in a display. Fore more information, see here.
• By default, both HiDPI and non-HiDPI resolutions are shown.

Examples

• Set the main display to 1920x1080:

$ display_manager.py res 1920 1080 or $ display_manager.py res 1920 1080 main

• Set all displays to their default configurations:

$ display_manager.py res default all

• Set the first external display to its highest available configuration:

$ display_manager.py res highest ext0

• Set the first two external displays to 1024x768 at 60Hz:

$ display_manager.py res 1024 768 60 ext0 ext1

Rotate

Use rotate to change your display's orientation.

usage: $ display_manager.py rotate <angle> [scope...]

Examples

• Rotate the main display by 90 degrees (counter-clockwise):

$ display_manager.py rotate 90 or $ display_manager.py rotate 90 main

• Return all displays to default orientation:

$ display_manager.py rotate 0 all

Brightness

Use brightness to set the brightness on your display.

usage: $ display_manager.py brightness <brightness> [scope...]

Examples

• Set the brightness of the main display to 40% of its maximum brightness:

$ display_manager.py brightness .4 or $ display_manager.py brightness .4 main

• Set the brightness of all displays to their maximum:

$ display_manager.py brightness 1 all

Note: many displays do not support setting brightness automatically; this is most often the case with external monitors. If Display Manager cannot configure your display's brightness, see whether it can be set manually on the display's hardware.

Underscan

Use underscan to configure HDMI underscan settings.

usage: $ display_manager.py underscan <underscan> [scope...]

Notes:

• HDMI underscan settings can fix displays that under-render images, causing the outer edge of the screen to be left empty. Displays default to underscan 0. For more details, see here.
• Display Manager can only set underscan on HDMI screens, and not all HDMI screens are supported. If Display Manager cannot configure your display's underscan, see whether it can be set manually on the display's hardware.

Examples

• Set main display to 0% underscan:

$ display_manager.py underscan 0 or $ display_manager.py underscan 0 main

• Set all displays to 75% underscan:

$ display_manager.py underscan .75 all

Mirror

Use mirror to enable or disable display mirroring.

usage:

• $ display_manager.py mirror enable <source> <target...>
• $ display_manager.py mirror disable [scope...]

Note: if main is set to mirror another display, that display becomes main.

Examples

• Set all external displays to mirror the main display:

$ display_manager.py mirror enable main all

• Set the main display and the first external display to mirror the second external display:

$ display_manager.py mirror enable ext1 main ext0

• Stop mirroring on all displays:

$ display_manager.py mirror disable

• Stop mirroring on the main display:

$ display_manager.py mirror disable main

Usage Examples

Display Manager allows you to manipulate displays in a variety of ways. You can write your own Python scripts with the Display Manager library, write shell scripts or manually configure displays using the command-line API, or access the functionality of the command-line API through the GUI. A few potential use cases are outlined below:

Library Examples

First, import the Display Manager library, like so:

import display_manager_lib as dm

Next, say you'd like to automatically set all the displays connected to your computer to their highest resolution. A simple script might look like this:

for display in dm.getAllDisplays():
    display.setMode(display.highestMode())

Perhaps you'd like your main display to rotate to 90 degrees. The following would work:

display = dm.getMainDisplay()
display.setRotate(90)

Finally, consider a case where you'd like the main display in a set of two displays to mirror each other if not mirroring, or to disable mirroring if it is currently enabled. You might try this:

main = dm.getMainDisplay()
ext0 = [d for d in dm.getAllDisplays() if d.tag == "ext0"][0]
if not ext0.mirrorSource:
    ext0.setMirrorSource(main)
else:
    ext0.setMirrorSource(None)

You can use any of the properties and methods of Display objects to configure their settings, which is exactly how the command-line API works. For more information about the Display Manager Library, see here, or look at the triple-quoted docstrings in display_manager_lib.py for any object or function you're interested in.

Command-Line Examples

In many cases, it may be desirable to configure displays from the command line, whether manually or via a script. Say you'd like a script to automatically set a display to its highest available resolution. The following would do just that:

$ display_manager.py res highest

But, in many cases, you might want to call several such commands at the same time. Of course, you may write them out line-by-line, but this takes a little longer, and more importantly, running several commands in this way may lead to undesired interference between commands. As such, it is recommended that multiple commands be run like so:

$ display_manager.py res 1920 1080 rotate 90 brightness .5 ...

In this way, you may pass in as many commands as you like, and Display Manager will find a way to run them simultaneously without encountering configuration errors.

Note: only one help command may be run at a time, but any number of other commands may be run simultaneously in a non-blocking fashion.

System Administration Examples

Jamf Pro

"Jamf Pro, developed by Jamf, is a comprehensive management system for Apple macOS computers and iOS devices... [including] deploying and maintaining software, responding to security threats, distributing settings, and analyzing inventory data." ^source

Suppose you'd like all computers in a particular Jamf Pro scope to default to their highest "retina-friendly" resolution at maximum brightness at login. You could create a policy

and add a script containing the following to it

#!/bin/sh

# Check to make sure the library and command-line API are both installed
if [[ -e /Library/Python/2.7/site-packages/display_manager_lib.py && \
	-e /usr/local/bin/display_manager.py ]] ; then
	
	display_manager.py res highest only-hidpi brightness 1

else
	exit 1
fi

like so:

For more details about command-line usage, see here; for examples, see command-line examples.

Outset

"Outset is a script which automatically processes packages, profiles, and scripts during the boot sequence, user login, or on demand." ^source

Perhaps you're managing several HDMI displays via Outset, and you'd like them to automatically rotate to portrait mode and set underscan to 50%. You could save the following script to /usr/local/outset/login-every/flip.sh:

#!/bin/sh

# Check to make sure the library and command-line API are both installed
if [[ -e /Library/Python/2.7/site-packages/display_manager_lib.py && \
	-e /usr/local/bin/display_manager.py ]] ; then
	
	display_manager.py rotate 90 underscan .5
	
else
	exit 1
fi

For more details about command-line usage, see here; for examples, see command-line examples.

Update History