Raspbery Pi USB Gadget Image Builder
A script to add USB Ethernet Gadget configuration to a standard Raspbian Lite SD Card image. This should work with Raspberry Pi Zero, Zero W and 4.
Currently only tested on Linux and with Docker Desktop + WSL on Windows 10, but should also run on OSx
Requirements
- Docker
- expect
Install
Clone the repo
git clone https://github.com/hardillb/rpi-gadget-image-creator.git
Copy the raspbian lite image into the rpi-gadget-image-creator directory.
Running
./setup.sh 2019-09-26-raspbian-buster-lite.img
To build a 64bit OS image you need to add -64 before the image name. 64bit versions will run on Pi 3 and Pi 4 hardware.
./setup.sh -64 2020-08-20-raspios-buster-arm64.img
Once complete you can write the image file to a SD Card with any of the usual tools e.g. dd or balena-etch.
You can find instructions on the Raspberry Pi website here
TODO
Look at repackaging everything into an extention to DockerPi so the whole thing runs in the container.