Discover @polykit Open Source projects

Polykit (@polykit)

polykit

Stars
493
Global Rank 58,536 (Top 3 %)
Followers 221
Following 44
Registered about 4 years ago
Most used languages

C++
33.3 %

OpenSCAD 16.7 %

BASIC 16.7 %

Go
16.7 %

C
16.7 %
Location 🇩🇪 Germany
Country Total Rank 4,461
Country Ranking

BASIC 4

OpenSCAD 146

C
419

C++
1,312

Go
4,317

pico-dco

Polyphonic Digitally Controlled Oscillator (DCO) controlled by Raspberry Pi Pico PIO

polykit-x-monosynth

The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer

polykit-x-voice-card

Schematics and PCB layout for a voice card with multimode filter for a polyphonic synthesizer

kosmo-spring-reverb-driver

Schematics and PCB layout for a spring reverb driver in Kosmo modular format

dco

Arduino based DCO

kosmo-multitool

Arduino Nano Every based development platform for DIY synthesizer enthusiasts.

eurorack-psu

Eurorack Power Supply +12V -12V +5V

polykit-x-mainboard

Schematics and PCB layout for a mainboard for an 8 voice polyphonic synthesizer

vco-1

PCB and schematics for a voltage controlled oscillator (VCO) based on the Jupiter 8.

vco-8

Analog Octo Voltage Controlled Oscillator VCO Kicad PCB and schematics

adsr-3310-8

Kicad schematics and PCB layout for an 8 channel ADSR based on CEM3310/AS3310

vcf-3350-8

CEM3350/AS3350 based 8 channel VCF

kosmo-sample-and-hold

Schematics and PCB layout for a sample&hold / noise module in Kosmo format

microphone-preamp

Schematics and PCB for a microphone preamp with phantom power

vca-adsr

VCA and ADSR schematics and PCB layout

kosmo-sidechain

Kicad PCB and schematics for sidechain/ducking module in Kosmo modular synthesizer format

polykit-panel

PCB front panel for the Polykit-6 polyphonic synthesizer

kicad

Kicad symbols and footprints

lfo

Low Frequency Oscillator LFO

inverter-8

vic20-sequencer

Simple 16-step MIDI sequencer in BASIC for the Commodore VIC-20

multiplexer-8

16 to 8 channel multiplexer to select waveforms in a polysynth

vca-8

Schematics and layout for 8 VCAs on one PCB

polykit-samples

This repository contains various samples which can be used freely.

dual-mixer

Simple dual mixer schematics and PCB

polykit-x-controlboard

Control board schematics and PCB for my polyphonic synthesizer

stackable-resistor-box

Stackable box for resistor belts that can be printed

valve-adapter-noval

Noval valve adapter PCB for breadboards

panel-blank-5cm

Blank modular panel in KOSMO format, 5 cm width

panel-blank-10cm

Blank modular panel in KOSMO format, 10 cm width

peertube-autoscale-runners

A simple program to scale Peertube runners for video transcoding

3d-printed-microphone

3d printed dynamic microphone