Discover @damienmaguire Open Source projects

Damien Maguire (@damienmaguire)

damienmaguire

Stars
997
Global Rank 30,732 (Top 2 %)
Followers 759
Following 36
Registered about 10 years ago
Most used languages

C++
56.5 %

C
13.0 %

Arduino 8.7 %

TeX
4.3 %

HTML
4.3 %

AGS Script 4.3 %

Roff 4.3 %

Fluent 4.3 %
Location <UNKNOWN>
Country Total Rank 126

Stm32-vcu

A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.

Tesla-Charger

Reverse Engineering of the Tesla 10Kw charger and development of an open source control board

Tesla-Drive-Unit

Open Source logic board for the Tesla Model S large rear drive unit. PCB Files in DesignSpark 8 format.

Nissan-Leaf-Inverter-Controller

OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter

Tesla-Model-3-Battery-BMS

Reverse engineering of the Tesla Model 3 battery bms control

Tesla-Front-Drive-Unit

Open Source Logic board to control the Tesla Model S Front Drive Unit

BMW-i3-CCS

Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging

Prius-Gen3-Inverter

Open source logic board to control the Toyota Prius Gen 3 Inverter

Tesla-Model-3-Drive-Unit

Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.

Chademo-Fast-Charge-Controller

Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles

DC-Motor-Controller

Simple IGBT based controller for DC motors used in Electric Vehicles. Files in DesignSpark 8 format

CAN-BUS-Man-In-The-Middle

CAN BUS Man In The Middle for spying on and modifyling automotive can traffic on the fly.

BMW-E65-CANBUS

Information on the BMW E65 7 Series Powertrain CAN bus

Tesla-Model-3-Charger

Reverse Engineering of the Tesla Model 3 charger and development of an open source control board

Lexus-GS450H-Inverter-Controller

Opensource controller for the Lexus GS450H Hybrid inverter and gearbox

Tesla-Model-3-Charge-Port-Controller

Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU

VW-OnBoard-Charger

Hacking and reverse engineering of the VW Onboard AC chargers

Tesla-Gen3-Charger

Reverse Engineering of the Tesla Gen3 charger and development of an open source control board

5HP24-Controller

Alpha software for an Arduino based controller for the ZF 5HP24 Automatic gearbox

BMW_SBox

Reverse Engineering of the BMW SBox for use in ev conversion projects

MG-EV-Charger

Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles

Inverter

My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.

AmperaCharger

Software to run the Opel Ampera / Chevy Volt Charger Over CAN

Prius-Gen-2-Inverter

Design of a logic board to run the Toyota Prius Gen 2 Inverter

BMW-PHEV-BMS

Reverse engineering of the BMW PHEV battery pack bms CAN bus data

Outlander-PHEV

Collection of Data on running Mitsubishi Outlander Hybrid Drivetrain Components

AmperaBattery

Information on using the Chevy Volt / Opel Ampera Battery BMS

Tesla-M3-Bms-Software

Software for the STM32 based controller for the Tesla Model 3 battery BMB boards

Volvo-V50-CAN-Info

CANbus and other info on my Volvo V50 EV Project. aka the MuskVo

stm32-Logger

EVBMW CanLogger 6000

LeafLogs

Some Logs from my Gen 1 Nissan Leaf

Ampera-Volt-Inverter

Open Source Logic board for the Opel Ampera and Chevy Volt Inverter

Yaris-Auris-Inverter

Open Source Logic board for the Toyota Yaris and Auris inverter

MG-EV-Inverter

Reverse engineering of the drive motor and inverter used in MG Electric Vehicles

Jaguar-iPace-Inverter

Design of Opensource Logic boards to run the Jaguar iPace Inverter and Motors

Lexus-IS300H-Inverter

Open Source Logic board to run the Lexus IS300 Hybrid Inverter for EV Conversion projects

Volt-Ampera-BMS-Controller

EVShield

Simple cheap Arduino Due shield for controlling CAN based EV components

EV-CAN-BAttery-Monitor

Nextion-EV-Info-Display

STM32 based design to display various EV related information on a Nextion Display

Inverter-WiFi

RaspberryPi based adapter to allow WiFi access to the OpenSource EV Inverter

Enova-Inverter

Open source logic board to control the Enova Inverter

ESP8266-WiFi-Interface

A universal WiFi interface using the Olimex ESP8266 module for various open source EV projects

VW-Mild-Hybrid

Reversen engineering of VW Mild hybrid (48v) Parts