zigpy/bellows zigpy/bellows

  • Stars
    star
    183
  • Rank 210,154 (Top 5 %)
  • Language
    Python
  • License
    GNU General Publi...
  • Created almost 8 years ago
  • Updated 23 days ago
Twitter logo Share LinkedIn logo Share Facebook logo Share
zigpy/bellows
github

zigpy

Reviews

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Repository Details

A Python 3 project to implement EZSP for EmberZNet devices

bellows

Build Coverage

bellows is a Python 3 library implementation for the zigpy project to add Zigbee radio support for Silicon Labs EM35x ("Ember") and EFR32 ("Mighty Gecko") based Zigbee coordinator devices using the EZSP (EmberZNet Serial Protocol) interface.

The project can be used as a stand-alone library, however, the main goal of this project is to add native support for EmberZNet Zigbee radio based USB stick devices (a.k.a. "Ember" and "Mighty Gecko" based adapters/dongles/modules) to Home Assistant's built-in ZHA (Zigbee Home Automation) integration component, allowing Home Assistant with such hardware to nativly support direct control of compatible Zigbee devices, such as; Philips HUE, GE, Ledvance, Osram Lightify, Xiaomi/Aqara, IKEA Tradfri, Samsung SmartThings, and many more.

bellows interacts with the Zigbee Network Coprocessor (NCP) with EmberZNet PRO Zigbee coordinator firmware using the EZSP protocol serial interface APIs via via UART for Silicon Labs EM35x and EFR32 Zigbee radio module/chips hardware. The library currently supports the Silicon Labs EZSP (EmberZNet Serial Protocol) API versions v4/v5/v6/v7/v8 for Silabs older EM35x "Ember" and their newer EFR32 "Mighty Gecko" SoCs using ASH protocols over a serial interface.

Hardware requirement

EmberZNet based Zigbee radios using the EZSP protocol (via the bellows library for zigpy)

Warning about Zigbee to WiFi bridges

zigpy requires a robust connection between the zigpy radio library and the serial port of the Zigbee radio. With solutions such as ITEAD Sonoff ZBBridge or a Ser2Net serial proxy connection over a WiFi network it is expected to see NCP entered failed state. Requesting APP controller restart in the logs. This is a normal part of the operation and indicates there was a drop in communication which caused packet loss to occurred between the zigpy radio library and the Zigbee radio. The use of serial network proxies/bridges/servers over WiFi is therefore not recommended when wanting a stable Zigbee environment with zigpy.

Firmware requirement

bellows requires that the Zigbee adapter/board/module is pre-flashed/flashed with compatible firmware with EmberZNet PRO Zigbee Stack that uses the standard Silicon Labs EZSP (EmberZNet Serial Protocol) APIs for ASH protocol over a serial interface.

Silabs used to provide two main NCP images pre-build with firmware for EM35x, one image supported hardware flow control with a baud rate of 115200 and the other image supported software flow control with a rate of 57600.

Silicon Labs no longer provide pre-build firmware images, so now you have to build and compile firmware with their Simplicity Studio SDK for EmberZNet PRO Zigbee Protocol Stack Software. Simplicity Studio is a free download but building and compiling EmberZNet PRO Zigbee firmware images required that you have the serialnumber of an official Zigbee devkit registered to your Silicon Labs user account.

Firmware upgrade resources

EmberZNet and EZSP Protocol Version

Silicon Labs does not currently have a consolidated list of changes by EmberZNet SDK or EZSP protocol version. The EZSP additions, changes and deletions have only ever been listed in the "Zigbee EmberZNet Release Notes" (EmberZNet SDK) under the "New items" section as well as the matching UG100 EZSP Reference Guide included with each EmberZNet SDK release.

The largest change was between EZSP v4 (first added in EmberZNet 4.7.2 SDK) and EZSP v5 that was added in EmberZNet 5.9.0 SDK which requires the Legacy Frame ID 0xFF. The change from EZSP v5 to EZSP v6 was done in EmberZNet 6.0.0 SDK. The change from EZSP v6 to EZSP v7 was in EmberZNet 6.4.0 SDK. EmberZNet 6.7.0 SDK added EZSP v8 (and Secure EZSP Protocol Version 2).

Perhaps more important to know today is that EZSP v5, v6 and v7 (EmberZNet 6.6.x.x) use the same framing format, but EmberZNet 6.7.x.x/EZSP v8 introduced new framing format and expanded command id field from 8 bits to 16 bits and is and is not backward compatible.

Project status

This project is in early stages, so it is likely that APIs will change.

Currently implemented features are:

  • EZSP UART Gateway Protocol
  • EZSP application protocol
  • CLI wrapping basic ZigBee network operations (eg, scanning and forming a network)
  • ZDO functionality (with CLI)
  • ZCL functionality (with CLI)
  • An application framework with device state persistence

An example use of the CLI:

$ export EZSP_DEVICE=/dev/ttyUSB1
$ bellows devices
Device:
  NWK: 0x1ee4
  IEEE: 00:0d:6f:00:05:7d:2d:34
  Endpoints:
    1: profile=0x104, device_type=None, clusters=[0, 1, 3, 32, 1026, 1280, 2821]
    2: profile=0xc2df, device_type=None, clusters=[0, 1, 3, 2821]
Device:
  NWK: 0x64a6
  IEEE: d0:52:a8:00:e0:be:00:05
  Endpoints:
    1: profile=0x104, device_type=None, clusters=[0]
    2: profile=0xfc01, device_type=None, clusters=[]
$ bellows zdo 00:0d:6f:00:05:7d:2d:34 get_endpoint 1
<SimpleDescriptor endpoint=1 profile=260 device_type=1026 device_version=0 input_clusters=[0, 1, 3, 32, 1026, 1280, 2821] output_clusters=[25]>
$ bellows zcl 00:0d:6f:00:05:7d:2d:34 1 1026 read_attribute 0
0=1806

Configuration

Port configuration for USB, UART/Serial and GPIO adapters

  • To configure use of a locally connected USB adapter device path its serial interface by specifying the TTY (serial com) port, example : /dev/ttyUSB1
    • It is worth noting that while a few adapters have an embedded USB core (like EM3588 based devices) which will likely work with any baud rate speed, most USB sticks/dongles have an external USB to serial converter/bridge chip (eg Silabs CP210x, FTDI FT23x, or WCH CH340) which require you to set a specific baud rate. It should as such be noted that some NCP firmware images require the use of 115200 baud rate speed while others use 57600 baud rate speed, also, some use no flow control (NSW flow control) while others require use of either software flow control (SW or XON/XOFF flow control) or hardware flow control (HW or RTS/CTS flow control).
    • If a USB radio is not recognized, it might be necessary to make the serial adapters device id known to driver, e.g. CP210x driver by Silicon Labs.
    • Find the device id (as listed by the command lsusb). For the Bitron Video/Smabit BV AV2010/10 that might for example be 10c4 8b34.
    • Unplug the device.
    • Enter the following commands (replace the example id 10c4 8b34 with the real one listed by lsusb on your system):
    sudo -s
modprobe cp210x
echo 10c4 8b34 > /sys/bus/usb-serial/drivers/cp210x/new_id
    • Plug in the dongle. It should now be recognized properly as ttyUSBx.

Port configuration for network adapters via socket

  • To configure the use of a remote Ethernet or WiFi based network connected bridge/proxy Zigbee adapter, like exammple Sonoff ZBBridge or ZiGate WiFi Gateway, enter socket://<adapter-IP>:<port> and use 115200 baud rate as the port speed.

NVRAM Backup and restore

Warning! Please note that this is a highly experimental feature! Theoretically this allows backing up and restoring NCP state between the hardware version.

NVRAM backup can be performed to migrate between different radio hardware as long as they based on the same chip. Anything else will not work. If this is done between different hardwares, the EUI64 is going to be different on the new hardware meaning the binding tables on all the devices are going to be wrong.

To export TC config, see bellows backup --help usually it is just bellows backup > your-backup-file.txt. 
The backup contains your network key, so you probably should keep that file secure.
To import, see bellows restore --backup-file your-backup-file.txt

Note! The restoration does not restore NCP children and relies on children just to find a new parent. You either have to reconfigure all the devices (recommended so the bindings are updated) or alternatively you could override the EUI64 on the new hardware, essentially producing a clone. Be very careful if you decide to go with the latter route. You can change the EUI64 only once and once you set it it is impossible to change it without a specialized hardware (SWD programmer).

Tested migrations:

  • To-Do

Testing new releases

Testing a new release of the bellows library before it is released in Home Assistant.

If you are using Supervised Home Assistant (formerly known as the Hassio/Hass.io distro):

If you are instead using some custom python installation of Home Assistant then do this:

  • Activate your python virtual env
  • Update package with pip 
    pip install bellows==0.16.0

Release packages available via PyPI

New packages of tagged versions are also released via the "bellows" project on PyPI

Older packages of tagged versions are still available on the "bellows-homeassistant" project on PyPI

Reference documentation

How to contribute

If you are looking to make a contribution to this project we suggest that you follow the steps in these guides:

Some developers might also be interested in receiving donations in the form of hardware such as Zigbee modules or devices, and even if such donations are most often donated with no strings attached it could in many cases help the developers motivation and indirect improve the development of this project.

More Repositories

1

zigpy

Library implementing a ZigBee stack
Python
844
star
2

zha-device-handlers

ZHA device handlers bridge the functionality gap created when manufacturers deviate from the ZCL specification, handling deviations and exceptions by parsing custom messages to and from Zigbee devices.
Python
719
star
3

zigpy-znp

TI CC2531, CC13x2, CC26x2 radio support for Zigpy and ZHA
Python
145
star
4

zigpy-deconz

A library which communicates with Deconz radios for zigpy
Python
86
star
5

zigpy-cc

Texas Instruments Z-Stack ZNP handler for zigpy
Python
71
star
6

open-coordinator-backup

Open Zigbee coordinator backup format
56
star
7

zigpy-cli

Command line interface for zigpy
Python
44
star
8

zigpy-zigate

A library which communicates with ZiGate radios for zigpy
Python
30
star
9

zigpy-xbee

A library which communicates with XBee radios for zigpy
Python
22
star
10

zha

Zigbee Home Automation
Python
15
star
11

zha-websocket-server

Python
9
star
12

quirk-generator

Stub quirk generator for zha-quirks
Python
5
star
13

workflows

Reusable workflows for the zigpy organization
1
star