Octopus.Energy 🐙 referral code. You get £50 credit for joining and I get £50 credit.

homeassistant-solax-modbus

Universal Solar Inverter over Modbus RS485 / TCP custom_component for Home Assistant

Integration 2023.09.4 and newer only supports HA 2023.9.2 and newer. Support for pyModbus below 3.5.2 has been dropped. For HA installations older than 2023.9.0 Integration 2023.09.3 is the last supported version

Support Modbus over RS485 & TCP

SolaX - PocketWiFi Readme

(Pocket LAN / Pocket WiFi v1 & v2 does not provide a Modbus connection in most situations, trouble shooting for Pocket WiFi will not be provided)

Pocket WiFi 3.0 with Firmware V3.004.03 and above is only officially supported. SolaX only mention Gen4 Hybrid, other Inverter may work?

Contact SolaX for latest version.

(⚠I still don't recomend the PocketWiFi. If you loose all entites after normal operation, try power cycling your Inverter.

Another approach to fixing previously working PocketWiFi installs is to restart your rooter and then reload the integration in Home Assistant. If that doesn't work you can unplug PocketWifi usb for 30 seconds and plug it in again, then reload the integration.

Updating / downgrading the Integration or Home Assitant wont help, you have lost the Internal Modbus connection between the Inverter and PocketWiFi and I am unable to assist with this issue.⚠)

Please check the Wiki for Compatible RS485 Adaptors

You can have multiple instances of this Integration, just change the default Prefix from SolaX to something else. Ie SolaX Main or SolaX Southwest

Supports:

Ginlong Solis

RHI-nK-48ES-5G Single Phase (lowercase n indicates Inverter size, ie 6kW)
RHI-3PnK-HVES-5G Three Phase (lowercase n indicates Inverter size, ie 10kW)

Growatt:

AC Battery Storage:
- SPA
Hybrid:
- SPH
- TL-XH
PV Only:
- MAC
- MAX
- MID
- TL-X

Sofar Solar

HYDxxKTL-3P (plugin_sofar)
HYDxxxxES (plugin_sofar_old)

SolaX Power

A1 Hybrid - WIP
Gen2 Hybrid
Gen3 AC, Hybrid & Retrofit
Gen4 Hybrid
- Qcells Q.VOLT HYB-G3-3P
- TIGO TSI
J1 Hybrid - WIP
X3 MIC / MIC PRO (Limited set of entities available)
X1 Air/Boost/Mini (Limited set of entities available)

Documentation

For further Documentation please refer to the Wiki

Installation

Preferred Option

You can add this custom_component directly through HACS, if you have HACS installed on your Home Assistant instance.

Alternatively

Download the zip / tar.gz source file from the release page.

Extract the contents of the zip / tar.gz
In the folder of the extracted content you will find a directory 'custom_components'.
Copy this directory into your Home-Assistant '' directory so that you end up with this directory structure: '/custom_components/solax_modbus
Restart Home-Assistant

Post Installation

After reboot of Home-Assistant, this integration can be configured through the integration setup UI

TCP

Serial

Any manual updates / HACS updates require a restart of Home Assistant to take effect.

Any major changes might require deleting the Integration from the Integration page and adding again. If you name the Integration exactly the same including the Area if set, you should retain the same entity naming bar any name changes in the release. (Refer to the release notes for any naming change)

Known Issues

You can only have one connection to the inverter, so you can't use this and one of my yaml packages at the same time for writing to registers.
Possible Warnings about blocking call in the event loop (in systems with serial modbus connection).

You can add the following lines to your configuration file:

logger:
  default: warning
  logs:
    homeassistant.util.async_: error

Please check the Todo List under discussions for other known issues and what's being worked on.
If your Inverter is asleep do not start this integration / restart HA as you will get the following error "Modbus Error: [Connection] Failed to connect[Modbus" You can't establish a connection if there is nothing to connect to.

FAQ

1. How do I enable a disabled entitie?

Example given is for "Config Max Export"

Go to the SolaX Integration page.

Find "+xy entities not shown"

Click those till you find "Config Max Export"

Then Cog/Gear icon.

There is an option to enable it and press "UPDATE"

If the Integration fails to load with the following error in your log "unrecognized inverter type - serial number : {your_serial_number_here}" or "unrecognized inverter type - firmware version : {your_firmware_version_here}"

Please use one of the following discussions providing the details asked for:

SolaX Only - If you can read values, but unable to adjust select / number you need to press the "Unlock Inverter" button. Might need performing again following a full Power Cycle

4. Check a python module version eg pyModbus:

Virtual Machine - Goto the console:

   ha > login
   # docker exec -it homeassistant /bin/bash
   pip show pymodbus

Docker (Core) - Goto the console:

   pip show pymodbus

To list all modules:

   Replace:
   pip show pymodbus
   With:
   pip list

wills106/homeassistant-solax-modbus

wills106

Reviews

Repository Details