There are no reviews yet. Be the first to send feedback to the community and the maintainers!
Explore-Labs-GPS-Receiver-ublox-MAX-M8Q
It is based on the 8th generation ublox MAX-M8Q module that provides accurate location and time information. It has a high quality ceramic patch antenna on board, and connects to your system via TTL serial broken out on 2.54 cm breadboard compatible pads.Fourier-Decomposition-Method
Python implementation of Fourier Decomposition MethodExplore-Labs-3D-Accelerometer-3D-Magnetometer-LSM303D-Compass-Breakout-Board
The LSM303D is a system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor that is ideal for making a tilt-compensated compass.Explore-Labs-3D-Gyroscope-L3GD20H-Breakout-Board
This breakout board is based on ST L3GD20H three-axis gyroscope, which measures the angular rates of rotation about the roll (X), pitch (Y), and yaw (Z) axes. Angular velocity measurements can be read through a digital I2C or SPI interface.DIY-Electronics
Jump start your electronics journey here. Contains code examples for interfacing with different electronic components.Logic-Level-Converter
Four-Channel Bidirectional Logic Level Converter using MOSFETsExplore-Labs-EAGLE-Library
This library contains most of the components/parts/devices used in our products. Psst: A hint for new products.Magnetometer
Honeywell’s HMC5883L 3-Axis Magnetometer can measure both the direction and the magnitude of Earth’s magnetic fields. Think of it as a Digital Compass.IMU-9DoF-AHRS
Explore Labs' 9 DoF AHRS IMU with MPU-9150, MPL3115A2 and HTU21D and a GPS connector.Pocket-Step-Up-Converter
The Pocket Step-Up Converter is a DC-to-DC Boost Converter which generates a supply voltage of 5 V or 3.3 V from a single-cell AA alkaline battery.IMU-9DoF-Fusion
Explore Labs' 9 Degrees of Freedom Inertial Measurement Unit with MPU-6150 and HMC5883L and Auto Voltage Level ShiftingExplore-Labs-ESP8266-WiFi-Internet-of-Things-IoT-Breakout
It is based on the widely popular ESP8266EX SoC from Espressif. It is breadboard friendly, supports input voltage from 3.3V to 5V and its level-shifted Tx, Rx pins are 5V compatible.Love Open Source and this site? Check out how you can help us