Use HDMI2USB-misoc-firmware

This firmware is obsolete and now read-only.

This firmware has been replaced by the HDMI2USB-misoc-firmware. This repository is kept around for historical reasons. It was original developed by Jahanzeb Ahmad using hand coded VHDL/Verilog and with cores from OpenCores and the Xilinx LogiCORE IP Core Generator.

Further history of this firmware can be found in the HDMI2USB-jahanzeb-firmware-history repository.

This firmware is obsolete and now read-only.

Use HDMI2USB-misoc-firmware

HDMI2USB - A HDMI/DVI Capturing Solution

HDMI2USB is a device to capture HDMI and DVI (and Displayport with cheap active adapters) and send it on USB port as UVC video. The device attaches computer as a standard webcam so there is no need of installing additional drivers.

More information about the device can be found in the wiki @ https://github.com/timvideos/HDMI2USB/wiki.

Firmware

This repository contains the source code for the various firmware in the HDMI2USB. More information on the firmware required by the HDMI2USB can be found on the Firmware in the wiki

Prebuilt firmware suitable for loading on devices can be found in the HDMI2USB-firmware-prebuilt repository

A Developer's Guide to the functionality, design and source code can be found at: https://docs.google.com/document/d/1sEhcLmseSLfqr2kH5UtSyMhg5yaNTnCkdNkSvA_ayq4/pub

Building

Prerequisites

• Xilinx WebPack 14.2 - Needed for building FPGA firmware.
• sdcc > ???? - Needed for building Cypress USB firmware.

Building

FIXME: Add instructions here

make

Loading

FIXME: Add instructions here