Discover sparkfun/Qwiic_GPS-RTK Open Source project

SparkFun's KiCad Libraries

509

SparkFun-KiCad-Libraries

ATMega32U4 Arduino board, available from SparkFun Electronics

425

Pro_Micro

Board definitions for SparkFun-manufactured AVR, ARM, and ESP-based Arduino boards.

253

Arduino_Boards

246

Fritzing_Parts

This repo houses all of the SFE Fritzing parts for use in diagrams in tutorials. If you create a new part in Fritzing that correlates to an SFE part, please add it here so others may use it and to avoid duplication.

240

SparkFun_u-blox_GNSS_Arduino_Library

An Arduino library which allows you to communicate seamlessly with the full range of u-blox GNSS modules

Arduino library for the MPU-9250 enabling its digital motion process (DMP) features.

217

SparkFun_MPU-9250-DMP_Arduino_Library

215

SparkFun_Eagle_Settings

The Eagle settings SparkFun uses for board designs

211

3D_Models

3D Models of our products

HTML

204

MaKeyMaKey

The main branch for MaKey MaKey firmware on SparkFun's version of the board.

SparkFun's Public Eagle PCB Footprints for pre-Eagle 6.0

191

Old-SparkFun-Eagle-Library

181

AD8232_Heart_Rate_Monitor

AD8232 Heart Rate Monitor

Processing

163

WiFly-Shield

WiFly Shield -- A shield for the Roving Networks RN-52 WiFly Module.

A breakout board for the HX711 load cell weight measuring amplifier

147

SparkFun_CAN-Bus_Arduino_Library

145

HX711-Load-Cell-Amplifier

Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules

143

SparkFun_Ublox_Arduino_Library

Example code and PCB design files for the MPU-9105, 9DOF.

141

MPU-9150_Breakout

Code, final versions, and information on the Sparkfun Graphical Datasheets

130

Graphical_Datasheets

3D Printed Pokédex smartphone case

122

Pokedex

118

SparkFun_BME280_Arduino_Library

An Arduino library to control the BME280 humidity and pressure sensor.

Arduino support for ICM_20948 w/ portable C backbone

116

SparkFun_ICM-20948_ArduinoLibrary

113

9DOF_Razor_IMU

9DOF Razor IMU available from SparkFun Electronics

111

Fingerprint_Scanner-TTL

Repository with example code for SEN-14585 & SEN-14585 at SparkFun.com

Controlling and reading from the MLX90640 IR array thermal imaging sensor

106

SparkFun_MLX90640_Arduino_Example

Breakout board for the Avago APDS-9960 proximity, light, RGB, and gesture sensor, made by SparkFun Electronics.

103

APDS-9960_RGB_and_Gesture_Sensor

SparkFun's Arduino Pro Mini 328 is a bare bones super small Arduino compatible development board.

103

Arduino_Pro_Mini_328

SIK-Guide-Code

Example code from the SparkFun Inventor's Kit Guide.

Example code and board files for the Serial 7 Segment Display.

Serial7SegmentDisplay

The OpenLog Artemis is an open source datalogger the comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. All without writing a single line of code!

OpenLog_Artemis

Arduino core to support the Apollo3 microcontroller from Ambiq Micro

Arduino_Apollo3

Github_Tutorial

A very basic and flawed piece of code to show how Github GUI works.

CAN-Bus_Shield

An Arduino Library for the BNO080 IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms.

SparkFun_BNO080_Arduino_Library

Seven Segment library for Arduino

SevSeg

WiFi and TCP drivers for an ESP8266 running AT firmware.

SparkFun_ESP8266_AT_Arduino_Library

SparkFun APDS-9960 RGB/Gesture Sensor Arduino Library

SparkFun_APDS-9960_Sensor_Arduino_Library

Arduino library for the SparkFun Micro OLED - a breakout board for a monochrome, 0.66", 64x48 OLED display.

SparkFun_Micro_OLED_Arduino_Library

SparkFun_VL53L1X_Arduino_Library

A library for the laser based VL53L1X Time Of Flight distance sensor capable of detecting a target 4m away!

Breakout board for the Nordic nRF52832, a BLE/ANT/2.4GHz, Cortex-M4F SoC.

nRF52832_Breakout

SparkFun_SCD30_Arduino_Library

An Arduino library for the SCD30 NDIR CO2 sensor.

Logic level converter bi-directional with Mosfets

Logic_Level_Bidirectional

ESP32_Miscellany

A grab bag of ESP32-related documentation, example code, hardware diagrams, and more.

ESP32_Thing

Development platform for the Espressif ESP32 WiFi/Microcontroller SoC

Pocket_AVR_Programmer

Example firmware and board files for the Pocket AVR Programmer

Support files for SparkFun's 32u4-based Arduino-compatible development boards.

SF32u4_boards

BMP180_Breakout

Breakout board for the Bosch BMP180 barometric pressure sensor

A board that provides a serial interface with a vehicle's OBD-II bus.

OBD-II_UART

Hardware files for the Tiny AVR Programmer

Tiny-AVR-Programmer

MPU-9250_Breakout

Weather_Shield

Barometric pressure, temperature, humidity and light sensing weather shield for Arduino.

Troubleshooting tool for embedded devices available from SparkFun Electronics

Bus_Pirate

Example Code for Nokia 5110 Graphic LCD

GraphicLCD_Nokia_5110

SparkFun_LSM9DS1_Arduino_Library

Arduino library for the LSM9DS1 9DOF IMU.

The MicroView is a chip-sized Arduino with a built-in OLED, available from SparkFun Electronics

MicroView

An open source board for load cell reading and configuration based on the HX711 and ATmega328.

OpenScale

Triple axis accelerometer MMA8452, I2C based with tap and orientation settings.

MMA8452_Accelerometer

RF_Links

These wireless transmitters and receivers easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link.

An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface

SparkFun_u-blox_GNSS_v3

Qwiic_Ublox_Gps_Py

phant logging utility library for arduino

phant-arduino

SparkFun_TB6612FNG_Arduino_Library

Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.

SparkFun_RTK_Firmware

Rogue_Router

Solar Access Point Fileserver for Sparkfun Thing

Arduino

HC-SR04_UltrasonicSensor

Arduino example code for the HC-SR04 ultrasonic ranging sensor.

Midi shield product 9595, available from SparkFun Electronics

MIDI_Shield

Arduino library for the LSM6DS3

SparkFun_LSM6DS3_Arduino_Library

Join the web developers at SparkFun Electronics

hacker-application

SparkFun_Simultaneous_RFID_Tag_Reader_Library

Arduino library to control the M6E-Nano RFID module from ThingMagic

Arduino library for the SX1509 16-I/O GPIO expander.

SparkFun_SX1509_Arduino_Library

Python package for the qwiic system.

Qwiic_Py

A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.

Qwiic_GPS-RTK2

ESP8266_Thing

A breakout and development board for the ESP8266 WiFi SoC.

SAMD21_Mini_Breakout

A miniature SAM21G Breakout, in the form factor/pin-out of a Pro Mini.

Cherry_MX_Switch_Breakout

Breakout board for Cherry's MX-series keyswitches

SparkFun_BQ27441_Arduino_Library

Arduino library for the BQ27441 LiPo Fuel Gauge.

Example code for use on the pcDuino

pcDuino

SparkFun_ADXL345_Arduino_Library

Arduino Library for the ADXL345

This is an Arduino library for SparkFun's Color LCD Shield

ColorLCDShield

A library to drive the AMS CCS811 air quality sensor

SparkFun_CCS811_Arduino_Library

Example code and board files for the Si4703 FM Tuner Evaluation Board

Si4703_FM_Tuner_Evaluation_Board

Breakout board for the HTU21D digital humidity sensor.

HTU21D_Breakout

Code for the tutorial available from SparkFun Electronics

Wimp_Weather_Station

Squirrel

BMP180_Breakout_Arduino_Library

Arduino libraries for the BMP180 pressure sensor breakout board

The RedBoard is SparkFun's take on the Arduino Uno. It combines the simplicity of the Uno's Optiboot bootloader (which is used in the Pro series), with the stability of the FTDI and a mini-B USB connector.

RedBoard

SparkFun_External_EEPROM_Arduino_Library

An Arduino library for the easy control of external I2C EEPROMs.

Arduino library for the MLX90614 Infrared Thermometer.

SparkFun_MLX90614_Arduino_Library

SparkFun's Edge Development Board is based around the newest edge technology and is perfect for getting your feet wet with voice and even gesture recognition without relying on 3rd party cloud services.

SparkFun_Edge

SparkFun Fork of Mike McCauley's RadioHead library (http://www.airspayce.com/mikem/arduino/RadioHead/)

SparkFun_RadioHead_Arduino_Library

MPU-6050 TriAxis Accelerometer and Gyroscope, available from SparkFun Electronics

MPU-6050_Breakout

Example firmware and hardware files for the Simon Says kit.

Simon-Says

Arduino

MAX30105_Particle_Sensor_Breakout

Breakout to sense smoke, SpO2, Pulse Detection, as well as airborne particles.

A copy of the AmbiqSuite SDK available on GitHub. Can be used to include AmbiqSuite as a submodule. May be used to track issues in SDK releases, however this repo is not maintained by AmbiqMicro

AmbiqSuiteSDK

SFE_CC3000_Library

Arduino library for the TI CC3000 WiFi module

HTU21D Breakout Arduino Library

SparkFun_HTU21D_Breakout_Arduino_Library

Microphone with binary output indicating ambient sound, available from SparkFun Electronics.

Sound_Detector

Demo Code for the Thermal Printer available from SparkFun Electronics

Thermal_Printer

CCS811_Air_Quality_Breakout

CCS811 Air quality sensor capable of detecting CO2 and TVOCs