Discover sbcshop/UHF_Reader_ESP-32_Hardware Open Source project

Stars
4
Rank 3,304,323 (Top 66 %)
Language
License
MIT License
Created over 1 year ago
Updated 11 months ago

sbcshop

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

In this GitHub repo, you will find Hardware design files of UHF Reader for ESP32.

HackyPi-Software

HackyPi is a compact and versatile USB device powered by the RP2040 microcontroller. It is a powerful tool for both ethical hacking and learning programming, compatible with all major operating systems. You can program using python language.

Python

107

MotorShield

Designed to help you get your Raspberry Pi based Robot. This board can control DC motor as well as the stepper motor. You can connect your IR and Ultrasonic sensors to tell your robot about its environment. You can easily make your Line Following, Object following, Wall following, Maze-Solver Robots.

Python

HackyPi-Hardware

RoundyPi

RoundyPi is a round LCD display based on RP2040 along with a compact and stylish 1.28-inch display module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, expand its engagement with your project. RoundyPi comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins.

Python

RoundyFi

RoundyFi is a round LCD display based on ESP-12E along with a compact and stylish 1.28-inch display module of 240×240 resolution, 65K RGB colors, clear and colorful displaying effect, expand its engagement with your project. RoundyFi comes with an embedded GC9A01 Driver and SPI Interface that minimize the required IO pins.

C++

PiSquare

PiSquare is an RP2040 and ESP-12E-based board that allows you to use multiple Raspberry Pi HATs without stacking them on top of one other. PiSquare uses Socket programming to wirelessly communicate multiple Raspberry Pi HATs ("n" numbers of HATs).

Python

PiArm

DIY Robotic Arm with 6 DOF based on Rasberry Pi

Python

StackyPi

StackyPi is a compact and advanced board that is designed with the RP2040 Micro-controller, which provides one set of 2x20 pin headers on which you can connect Raspberry Pi HATs. It means that one can plug HAT designed for Raspberry Pi and run it via the Pico Zero RP2040 that would make the user perform the advanced functions on it.

Python

RangePi

Range-Pi is a low cost portable “Plug and Play LoRaTM Dongle” based on Raspberry Pi RP2040 and LoRaTM Modules, comes with an onboard 1.14" LCD that covers 433/868/915 MHz frequency band to enable data transmission up to 5 KM.

Python

Raspberry-Pi-Pico-Breadboard-Kit

Raspberry Pi Pico Breadboard Kit is a multi-purpose Kit that consists of a “400 points half-size breadboard” on top, a Programmable Buzzer, 4 Programmable LEDs, 4 Push buttons, and dedicated 5V, 3v3, and GND pins at a single place.

Python

Air-Monitoring-HAT

SB Components developed the Air Monitor HAT for Raspberry Pi an open-source portable sensor that has the ability to provide the level of quantity of the suspended particulates with their mass.

Python

PiTalk_5

PiTalk with 5" LCD

Python

PiBeam_Software

PiBeam is a DIY USB transceiver device that can be programmed to control and manage your computer, gaming console, or multimedia system. An in-depth setup and working guide for PiBeam is available on this github.

Round-LCD-HAT

Round LCD HAT is a 1.28-inch display expansion board module of 240×240 resolution, 65K RGB colours, clear and colourful displaying effect, with a joystick, designed for Raspberry Pi to expand its engagement via SPI communication by providing standard 40 pins GPIO interface.

Python

SB-RFID-HAT

This is a Raspberry Pi RFID HAT Module operating in the 125Khz frequency range. It supports two communication interfaces: UART for RFID and I2C for Oled Display.

Python

PiMecha

PiMecha is a Raspberry Pi Humanoid Robot with 17 DOF

Python

Micro_RP2040

Micro RP2040 - a small and compact version of the popular Raspberry Pi Pico. This github includes Micro RP2040 Hardware Details and resources.

Spi-Box

Motion Activated Security Camera based on Raspberry Pi 2/3/3B+. User can capture images or videos based on motion and email the captured images/videos.

Python

UPS-Hat-RPi

UPS Hat is a 5v power supply, It fit at the top of the raspberry pi, it gives power backup, while raspberry pi's USB power is cut off. It has various protections like short circuit protection, reverse battery protection and indicator, overcharge/discharge protection, and over current protection. It has a 5V USB output, convenient for powering other boards.

Python

PiRelay

PiRelay provides a solution for controlling high current/voltage devices and makes your home appliances intelligent. It could be a nice solution for controlling devices that could not be directly controlled by RPi's Digital I/Os. Standardized shield form factor enables smooth connection with Raspberry Pi and compatibles.

Python

EncroPi-Software

It is an innovative and highly efficient USB RTC stick based on the Raspberry Pi RP2040 microcontroller. It is a power booster product for all electronic enthusiasts and time setters. We have designed EncroPi in such a way that its powerful and advanced features will help you in your projects seamlessly.

Python

PiCube

PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the latest product in the range of technologically advanced devices of SB Components.

Python

IoTPi_Software

IoTPi is an industrial board that consists of onboard RP2040, ESP8266 WIFI(ESP-12E) and RS-485 communication that can control up to 4/6 appliances/devices on a load of, photo-coupling isolation Optocoupler EL357NC, allowing users to safely control high voltages or current devices.

Python

Raspberry-Pi-Pico-Relay-Board

Raspberry Pi Pico Relay Board is developed by SB Components with the potential to control up to 4 appliances and loads up to 240V AC@ 7A, 30V DC@ 10A.

Makefile

Raspberry-Pi-Pico-RFID-Expansion

Raspberry Pi Pico RFID Expansion is the latest technology in the range of SB Component products boasting an advanced RFID Reader at the frequency of 125KHz

Python

Pico-WiFi-HAT

Pico WiFi HAT is a compact and easy-to-use WiFi HAT for the Raspberry Pi Pico that includes an ESP8266 module.

Python

PiCoder-Software

A compact and comprehensive Raspberry Pi Pico W based Learning Kit having onboard actuators, sensors, and LEDs makes learning enjoyable. The PiCoder is loaded with many features that are going to help you learn and explore many opportunities in the field of computer science and electronics.

PiTraffic

PiTraffic- Educational Traffic Light Add-on Shield HAT for Raspberry Pi

Python

USB-RTC-Software

USB RTC is an open source real time clock device that comprises MCP2221, a USB-to-UART/I2C serial converter, which enables USB connectivity, in the processes that include a USB, UART(Serial), GPIO, and I2C interfaces.

UHF-HAT-for-RaspberryPi-Software

UHF HAT for Raspberry Pi is an advanced and compact "Ultra High Frequency" RFID reader that consists of powerful RFID technology designing for a broad range of applications in the defense, healthcare system, banks, offices etc. UHF HAT for Raspberry Pi has an onboard ThingMagic® M6E Nano UHF RFID Reader that is JADAK’s smallest embeddable module with ultra-low power consumption and tiny form factor. This RFID reader is ideal for battery operated, low-cost, small form factor portable devices.

Python

Lo-Fi_Software

This GitHub page offers a step-by-step tutorial for using Lo-Fi. Lo-Fi combines ESP32S3 with LoRa to establish long-range wireless communication in challenging situations in addition to WiFi and BLE capabilities.

UHF_Reader_ESP-32_Software

This github page provides a getting started guide and other working details for the UHF reader for ESP32. The UHF Reader for ESP32 is a rapid multi-tag reading device for efficient and effective inventory management.

Pico-Sense-HAT

Sense HAT for Raspberry Pi Pico is a four-sensor environment monitoring device that measures temperature, air quality, humidity, and colour. The Sense HAT board is perfect for the environment monitoring project since it has multi-sensors with the ability to measure temperature, humidity, air quality and colours.

Python

AiryFi_Software

AiryFi is an open-source portable sensor that can deliver the quantity and mass of suspended particulates. It includes a PMSA003 sensor that uses a digital output with a 5V working voltage to offer information on suspended particulate matter (PM1.0, PM2.5, and PM10) in the air per unit volume.

C++

Relay-4-Zero

Relay 4 Zero provides a solution for controlling your home appliances. It is designed for switching remote devices by using RPi GPIOs.

Python

Scangenie_Software

This GitHub page offers a step-by-step tutorial for using ScanGenie.

PICO-CUBE

Pico Cube is a 4x4x4 LED cube HAT for Raspberry Pi Pico with 5V DC operating voltage. Pico cube, a monochromatic( Red, Blue, Green) LED with 64, is a fun way to learn programming.

Python

Scangenie_Hardware

The hardware design files for ScanGenie are available on this GitHub.

ReadPi_RFID_Software

ReadPi 125 KHz frequency based RFID Reader powered by Raspberry Pi Pico W unit. This github provides getting started guide and other working details for ReadPi RFID version.

PiRelay-V2

PiRelay-V2 is developed by SB Components with the potential to control 4 appliances and loads up to 20V AC/ 7 A, 30V DC/ 10A to provide a way to control the high voltage/current devices.

Python

PICO-LORA-EXPANSION

Pico LoRa™ Expansion is a low-power consumption data transmission board, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S/E22-400T22S SMA antenna connector that covers 868MHz/433MHz frequency band , Onboard 1.14" LCD,IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.

Python

Pitalk_4G_HAT_Software

The PiTalk 4G HAT is a handy, low-power Raspberry Pi HAT that features multi-communication functionalities such as GSM, GPRS, TCP, etc. It allows your Pi to easily make phone calls, send messages, connect to wireless networks, and so on. It is the most convenient IoT HAT that works with all variants of Raspberry Pi (model A, B and Zero). The users

Python

Trekko_Hardware

This GitHub provides hardware design files for the Trekko - Pico GPS Logger.

Trekko_Software

This Github provides a getting started guide and other working details for the Trekko - Pico GPS Logger.

Power-Monitor-HAT

3 Channel current/voltage moinitor HAT for Raspberry Pi using I2C or SMBus interface.

C++

ReadPi_RFID_Hardware

ReadPi RFID 125KHz Reader powered by Raspberry Pi Pico W. In this github repo you will find Hardware design files for ReadPi RFID

PiCoder-Hardware

EnkPi_7.5_Software

EnkPi is a series of 4 ePaper displays mounted on PCBs to provide sturdiness and comfort to the users. Powered with Raspberry Pi Pico W, these EnkPi boards have Partial Refresh Support with up to 170 degrees Wide Viewing Angle. In this github repo will see setup and getting started guide for EnkPi 7.5" series.

Python

AiryFi_Hardware

SB-Serial-Expansion-Hat

A guide to install and use SB- Serial expansion HAT on Raspberry pi with examples.

PiFinger

PiFinger, the first-ever Fingerprint HAT for Raspberry Pi Comprise of onboard Nuvoton MCU with an on-chip crypto-accelerator, Cortex-M23 TrustZone, and XOM facilities. A user can use the communication protocol to the PiFinger with commands over the UART protocol with the Baud rate 115200 bps or USB 2.0 full speed.

Python

PiTalk_3.2

PiTalk with 3.2" LCD. Modular and IoT enabled Smartphone based on Raspberry Pi

Python

ReadPi_NFC_Software

ReadPi 13.56 MHz frequency based NFC Reader/Writer powered by Raspberry Pi Pico W unit. This github provides getting started guide and other working details for ReadPi NFC version.

Lora-HAT-for-Raspberry-Pi

Pi LoRa™ Lora Hat is a low-power consumption data transmission board, comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-900T22S/E22-400T22S SMA antenna connector that covers 868MHz/433MHz frequency band ,IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating.

Python

USB_Type_C_to_LoRa_Dongle_Software

The LoRa Dongle is ideal for anyone wishing to develop long-distance wireless communication in a variety of applications. This github repository has a working guide for a USB C to LoRa Dongle.

EncroPi-Hardware

It is an innovative and highly efficient USB RTC stick based on the Raspberry Pi RP2040 microcontroller. It is a power booster product for all electronic enthusiasts and time setters.

SB_Serial_Servo

SB Serial Servo Code for Serial UART Communication via computer, Raspberry Pi, and Arduino.

Python

PICO-1.28-Round-LCD-HAT

Pico 1.28” Round LCD HAT is a 1.28-inch display HAT with 240 x 240 resolution, 65K RGB colors, clear and colorful displaying effect, and a joystick

Python

UHF_Reader_Pico_W_Software

This github page provides a getting started guide and other working details for the UHF reader for Pico W. The UHF Reader for Pico W is a rapid multi-tag reading device for efficient and effective inventory management.

RS485-CAN-HAT

RS485 CAN HAT is a multi node communication module, to communicate with devices in a long-range, designed dedicatedly for Raspberry Pi with an operating voltage of 3.3 V, CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230 that is controlled via UART.

Python

IoTFi-4G-Hardware

IoT-Fi is a compact low power IoT enabled device having the capability of GSM modules (SIM868/SIM7600G-H) for providing network connectivity via using sim card and having the power of RP2040 chip. It also consists of an LCD 1.14” display, ESP32-C3, a 3.5mm jack for audio I/p - o/p, SD card and SIM card slot.

Pico-2G-Expansion

Raspberry Pi Pico 2G Expansion is a QUAD-Band GSM/GPRS/GNSS Expansion designed dedicatedly for Raspberry Pi Pico with UART, USB 2.0 Interface, 850/900/1800/1900 MHz.

Python

GatePi-4CH

GatePi is a low-power consumption data transmission board, that comes with an onboard CH340 USB TO UART converter, Voltage Level Translator(74HC125V), E22-400T22S/E22-900T22S SMA antenna connector that covers 433/868/915 MHz frequency band, 4-Ch Relays, IPEX antenna connector, LoRa™ Spread Spectrum Modulation technology with auto multi-level repeating. GatePi is developed to enable data transmission up to 5 KM through the serial port.

Python

Pico_Universal_E-Paper_HAT_Software

Universal ePaper HAT is based on the Raspberry Pi Pico W which can be attached to any sizes of E-Paper screens ranging from 2.9", 4.2", 5.83" & 7.5". It has dual clips - on top and bottom side of the HAT to attach a display of any dimensions.

NetPi_Pico_Ethernet

NetPi is the perfect solution for your Raspberry Pi Pico's connectivity needs. It's an Ethernet HAT that enables your Pico to easily connect to the internet. With support for various internet protocols such as TCP, UDP, WOL over UDP, ICMP, IPv4, and more, NetPi can create IoT devices, robots, home automation systems, and industrial control systems.

Python

Usb_To_LoRa_Dongle_Software

USB to LoRa is a robust and versatile USB to LoRa that allows you to connect without limits. Its excellent range and simple connection allow you to converse with devices up to 5 kilometres distant.

Lo-Fi_Hardware

The hardware design files for Lo-Fi are available on this GitHub. Lo-Fi combines ESP32S3 with LoRa to establish long-range wireless communication in challenging situations in addition to WiFi and BLE capabilities.

Usb_To_LoRa_Dongle_Hardware

USB to LoRa is a robust and versatile USB to LoRa that allows you to connect without limits. Its excellent range and simple connection allow you to converse with devices up to 5 kilometres distant.

SquaryFi-Hardware

SquaryFi is an ESP-12E-based square LCD display that features a compact and appealing 1.54-inch display module.

PiBeam_Hardware

This GitHub provides hardware design files of PiBeam.

3.2_Touchsy_HAT_Resistive_Hardware

Touchsy HAT - the perfect solution for users who want to mount the display on their single-board computers. In this github repo you will find hardware files for 3.2" Touchsy HAT Resistive.

3.2_Touchsy_ESP-32_Capacitive_Hardware

Touchsy ESP-32 Capacitive - the perfect display solution for users who prefer ESP-32 over Raspberry Pi Pico W. In this github repo you will find hardware files for 3.2" Touchsy ESP-32 Capacitive.

Rotary_HAT_for_RaspberryPi_Software

This GitHub page offers a interfacing details and getting started guide of Rotary Encoder HAT for Raspberry Pi.

Python

Zero-Relay

Zero Relay provides a solution for controlling your home appliances. It is designed for switching remote devices by using RPi GPIOs.

Python

USB-RTC-Hardware

ArdiPi_Hardware

ArdiPi the ultimate Arduino Uno alternative packed with powerful specs and exciting features. In this github repo you will find hardware files for ArdiPi.

Pico-Motor-Driver

Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6 V-24 V. It is designed to connect 2 DC motors or 1 stepper motor simultaneously

Python

Ardi-32_Software

Ardi-32 is the ultimate Arduino Uno alternative packed with powerful specs and exciting features in the Arduino Uno form factor. Ardi-32 is powered by the latest ESP32-S3-WROOM-1. This github provides getting started guide and other working details for Ardi-32

IoTFi_2G_Hardware

SquaryPi-Software

SquaryPi is a square LCD display based on the RP2040, with a tiny and attractive 1.54-inch display module with 240x240 pixels resolution. It consist of on board SD Card slot for storing data you want to display, accelerometer, and three user buttons. It includes an inbuilt st7789 Driver and I2C Interface to reduce the number of IO pins required for

MicroSD-Breakout

SD Card Breakout is a compact and efficient way to add desired memory into your project to store data, media, codes, etc. It works on SPI interface communication makes it compatible to run it easily with SPI-based microcontrollers.

Python

IoTFi_2G_Software

Python

Makerpad_Pro_Software

The MakerPad Pro is a SmartScreen Hub with a 3.5" Touch Display and a 2 MP camera that is powered by the ESP32. On this GitHub, you may find instructions for getting started with Makerpad Pro.

Pico-Barcode-HAT-Software

Barcode HAT for Pico is a robust and compact barcode scanner board that consists of DE2120 scanner module, buzzer, 1.14” LCD screen, micro-USB port. It is designed to scan 20 different barcode symbologies in the segment of both 1D and 2D symbology like barcodes and QR codes.

Python

3.2_Touchsy_HAT_Resistive_Software

Touchsy HAT - the perfect solution for users who want to mount the display on their single-board computers. This github includes software, library and getting started instruction with details of Touchsy HAT board details.

IdentiPi_Software

An in-depth setup and working guide for IdentiPi is available on this github. Fingerprint HAT for Raspberry Pi Pico: an innovative solution for secure biometric authentication, an ideal tool for developing unique projects, Experience rapid and stable fingerprint verification.

Raspberry-Pi-Servo-Driver

The servo driver HAT is a PWM based expansion board designed for Raspberry Pi. The PCA9685 chip expands up to 16 channels and supports 12-bits resolution for each channel. It uses the I2C protocol for communication purpose.

Python

PiTalk_4

PiTalk with 4" LCD

Python

Barcode-Scanner-Breakout-Software

The DE2120 scanner module, buzzer, and micro-USB connector make up the Barcode, a sturdy and compact barcode scanner board. It can scan 20 distinct barcode symbologies in the 1D and 2D symbology segments, such as barcodes and QR codes.

USB-Fingerprint

USB Fingerprint board is a board comprise of an onboard Nuvoton MCU with an on-chip crypto-accelerator, Cortex-M23 TrustZone, and XOM facilities in a USB form-factor.

Python

Pico-WiFi-Air-Monitoring-Expansion

Pico Air WiFi Monitoring Expansion for Raspberry Pi Pico is an open-source portable sensor that has the ability to provide the level of quantity of the suspended particulates with their mass.

Python

LapPi_2.0_Assembled

LapPi 2.0 - a 100% DIY modular laptop which is compatible with all single board computers. Now that's what we call a true Level-Up.

USB-C-RTC-Software

The USB-C-RTC is a highly advanced device featuring an integrated DS3231 circuit; MCP2221. This GitHub provides getting started guide of USB-C-RTC

Rotary_HAT_for_RaspberryPi_Hardware

This GitHub page provides hardware design files for Rotary Encoder HAT for Raspberry Pi.

Rotary_ESP32S3_Powered_Software

This GitHub page offers interfacing and getting started guide for Rotary Encoder Powered by ESP32 S3.

EnkPi_4.2_Hardware

SquaryPi-Hardware

pxt-stembit

This is a Makecode extension for Stem:Bit developed by SB Components.

TypeScript

BreadPi

Packages for BreadPi, a hardware designed by SB Components

Python

100

SquaryFi-Software

SquaryFi is an ESP-12E-based square LCD display that features a compact and appealing 1.54-inch display module.

sbcshop/UHF_Reader_ESP-32_Hardware

sbcshop

Reviews

Repository Details

More Repositories