rydepier/Arduino-Thermocouple-with-OLED-Display

Stars
5
Rank 2,861,937 (Top 57 %)
Language
Created about 9 years ago
Updated about 9 years ago

rydepier/Arduino-Thermocouple-with-OLED-Display

rydepier

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Using a 128x64 OLED display with the MAX6675 Thermocouple shield

Arduino-OLED-Clock

An analog Clock using an OLED display

UBlox-NEO-7-GPS-and-Arduino

Using the Ublox Neo 7 VK2828U7G5LF GPS unit

Arduino-and-BLE-CC41A-Bluetooth

Using this Blueetooth unit as a Master and a Slave as well as an iBeacon

TEA5767-FM-Radio-with-IR-control-and-OLED-Display

Arduino UNO with TEA5767 FM Radio. Infra Red control and OLED Display.

Arduino-and-ULN2003-Stepper-Motor-Driver

Using a ULN2003 Stepper Motor Driver with a 28BYJ-48 motor

Arduino-and-Moon-Phase-on-OLED-Display

L9110-Motor-Driver-and-Fan-motor-for-Arduino.

Using the Keyes Motor and fan board

Arduino-talking-clock-with-WT588D---U-32M

Using a WT588D - U 32m audio module and a DS1307 to build a talking clock, the WT588D is used in 3 line mode. For more information on this project see my blog at

Arduino-and-OLED-Calendar

TM1638-Display-Driver-with-8-seven-segment-LEDS-and-Keys

This board has eight push buttons and eight LEDS. This sketch is for an ARDUINO.

Arduino-and-4x4-Matrix-Keyboard

Using a 4x4 switch Matrix Keyboard

DHT11-with-OLED-Display

Arduino with Humidity and Temperature sensor DHT11, uses OLED Display.

Arduino-Remote-Serial-Commander

Use a PC to control a remote Arduino using Radio or Serial cable

4x5-matrix-membrane-keyboard-electronic-lock-demonstration

Using a cheap 20 key membrane keyboard as data entry for an electronic lock

Arduino-Joystick-Weather-Clock

This clock has 22 screens selected using a joystick. Everything from weather forecast to moon phase on an OLED screen. The project requires an Arduino Mega, a BMP180 pressure sensor, a RTC DS1307, an OLED Screen, a DHT11 Humidity sensor, a buzzer and a joystick with switch.

Arduino-and-Nokia-LCD4884-display

Simple illustration of using a LCD4884 display shield as a clock. The joystick is used to set the time.

Arduino-Tape-Measure-with-OLED-Display

Using a HC-SR04 Ultrasonic unit and displaying the distance on an OLED Display in cm.

Arduino-with-Si7021-Humidity-and-Temperature

Using the Si7021 with an Arduino and an OLED Display

DHT22-using-OLED-Display

DHT22 Humidity and Temperature Sensor with OLED Display for Arduino.

AT24C256-EEPROM-Storage-and-Arduino

WT588D-U32M-audio-record-replay-board

This version of the WT588D has a USB uploader and 32mb of memory.