raspberrycoulis/envirophat-initialstate

Stars
1
Language
Python
Created about 7 years ago
Updated about 7 years ago

raspberrycoulis/envirophat-initialstate

raspberrycoulis

There are no reviews yet. Be the first to send feedback to the community and the maintainers!

Sending data from Pimoroni's Enviro pHAT to Initial State

remove-bloat

Remove bloatware from Raspberry Pi Raspbian with one script

dashdoorbell

Using the Amazon Dash button as a doorbell via Pushover

pushover

Python script for Raspberry Pi Pushover notifications

slack-motioneyeos-notifications

Enable Slack notifications in MotionEye OS to alert you of any detected movement.

beebotte-bme680

Using Pimoroni's BME680 breakout board with Beebotte to log live data

mqtt-home-data

Using a variety of sensors, such as the BME280 temperature, humidity and pressure sensor; the MCP9808 high accuracy temperature sensor; the TSL2561 luminosity sensor; the MS430 temperature, humidity, pressure, sound, light and air quality sensor; the Enviro pHAT from Pimoroni and any other sensors that I may add in the future. Data is sent via MQTT, which is then visualised via Grafana (using Telegram and InfluxDB). Sensors are usually connected to a Raspberry Pi or a ESP8266 variant (i.e. Node MCU or Wemo D1 Mini).

Pi-Ping

A quick and simple Python script that checks the status of a website, then uses ThingM's blink(1) USB RGB LED notification light to provide a visual indication of the status.

bme280-pi

Using the BME280 temperature, pressure and humidity sensor on the Raspberry Pi

plant-hydro-slack

Using a Raspberry Pi and a soil moisture sensor to send Slack notifications when our plant needs watering

beebotte-envirophat

Using Pimoroni's Enviro pHAT with Beebotte

docker-ghost-letsencrypt-nginx

Run Ghost via Docker and use SSL via Let's Encrypt whilst using NGINX

dash-mote

Using the Amazon Dash Button to trigger actions on Pimoroni's Mote kit

pushover-doorbell

Simple scripts (Python or C++) that send a Pushover notification when a simple button is pushed.

no-wifi-reboot

This is a very simple bash script that pings a network device, then initiates a reboot if there is no response - i.e. if the network is down.

brightpi-control

Basic scripts to control the LED's on Pi-Supply.com's Bright Pi camera add on for the Raspberry Pi.

bme280-tsl2561-beebotte

Use the BME280 and TSL2561 sensors to collect and send temperature, humidity, pressure and luminosity data to Beebotte

iftttdash

Use Amazon Dash with IFTTT to trigger almost anything!

codecademy-website.github.io

As part of the "Deploy a Website" course

update-pi

Update Pi automatically

pimoroni-cpu-stats

Using Pimoroni's UnicornHAT to show a simple colour gradient based on the CPU usage.

pimote

Simple Python scripts to turn on/off Pi-mote by Energenie sockets. Requires Python 2.7.