OpenPnP-OpenBuilds
An OpenPnP compatible SMT pick and place machine based on OpenBuilds linear motion components.
For announcements about this and other OpenPnP hardware, please join the OpenPnP mailing list at: http://groups.google.com/group/openpnp
Versions and Branches
The master branch contains the most up to date version and should be used for new builds. The develop branch contains new work and may not yet be ready for release. It should only be used by developers.
When a new version is released it is tagged with a version number that can be used to find that set of files in the future. If you are working on a previous build you should use the files from the tagged version you built your machine from. This will ensure compatibility. The list of released versions is below:
| Version | Description |
|---|---|
| 1.0 | First release, demoed at Maker Faire 2015. |
CAD
CAD files are created in Cubify Design ( http://cubify.com/Products/Design ) which has a 14 day fully functional free demo and is $199.00 to purchase. I highly recommend it.
Autodesk Fusion 360 versions are available at the following links. These links can be used to download the files in various formats, including STEP.
- Fusion 360 Develop Branch: http://a360.co/1UbEffq
- Fusion 360 Master Branch: http://a360.co/1UOBg9M
Bill of Materials
Bill of Materials at: https://docs.google.com/spreadsheets/d/1Jt3jb6zsk9aa-5eUBTdAOFm7u1YypV3FqZMti7bdn9s/edit?usp=sharing
Be sure to select the sheet that corresponds to the version you are building.
Note that the BOM is rough and several items are estimates. This machine was built as a prototype piece by piece, so it may be possible to purchase many of the items elsewhere for less cost. In addition, many items are purchased in large quantities when only a few are needed.
Hardware
Note that general hardware is not included in the BOM. You will need a huge variety of metric hardware. Full listing to come later. I recommend buying every size of M2, M3 and M5 Zinc Coated Phillips Pan Head from about 8mm to 25mm, along with regular nuts, nylock nuts, split lock washers and flat washers for each. McMaster is a good source for this hardware.
Build Instructions
See https://github.com/openpnp/openpnp-openbuilds/wiki/Build-Instructions