There are no reviews yet. Be the first to send feedback to the community and the maintainers!
A further developed version can be found on https://github.com/UIPEthernet/UIPEthernet -------------------------------------------------------------------------------------- This is UIPEthernet version 1.09 An plugin-replacement of the stock Arduino Ethernet library for ENC28J60 shields and breakout boards. Full support for persistent (streaming) TCP-connections and UDP (Client and Server each), ARP, ICMP, DHCP and DNS. Just include 'UIPEthernet.h' instead of 'Ethernet.h' and use all your code written for the stock Arduino Ethernet lib! UIPEthernet is written as a wrapper around the mature uIP Stack by Adam Dunkels, which provides the low-level implementation for all supported protocols. To overcome the memory-constrains (a 'regular' uIP-application does all processing in RAM) the ENC28J60 internal memory is used for all stream buffers (in and out). Only 400-600 Bytes of Arduinos RAM are used (depending on the number of concurrently open connections). As of Flash-memory a ATmega368-based Arduino is the minimum requirenment. This library is written by Norbert Truchsess <[email protected]> uIP was written by Adam Dunkels of the Networked Embedded Systems group at the Swedish Institute of Computer Science. This library was inspired by the SerialIP implementation by Adam Nielsen <[email protected]>, actually I took this code as a starting point, but in the latest versions there are very few lines left. Installation ------------ To install the libraries, you need to place them into your "libraries" folder. You can find it within your Arduino IDE distribution within the "hardware" folder. C:\> cd [path to Arduino distribution]\libraries C:\> git clone https://github.com/ntruchsess/arduino_uip UIPEthernet Be sure to restart the IDE if it was running. On a Mac, you will want to create a folder named "libraries" in in the "Documents" -> "Arduino" folder within your home directory. Clone the project there (and restart the IDE, if it was running during this process). $ cd ~/Documents/Arduino/libraries $ git clone https://github.com/ntruchsess/arduino_uip UIPEthernet Or you download the zipped version of the library from https://github.com/ntruchsess/arduino_uip/releases, and copy the contained directory UIPEthernet to [path to Arduino distribution]\libraries\UIPEthernet. If you are running Arduino-IDE 1.5.x use release-version 1.59 or checkout branch 'Arduino_1.5.x' Additional information can be found on the Arduino website: http://www.arduino.cc/en/Hacking/Libraries Documentation ------------- For more information visit: - UIPEthernet Repository on github: https://github.com/ntruchsess/arduino_uip - Arduino Ethernet library description http://arduino.cc/en/Reference/Ethernet (Arduino_uip uses the same API as that, just include "UIPEthernet.h", "UIPClient.h", "UIPServer.h" and "UIPUDP.h" instead of the stock "Ethernet.h", "EthernetClient.h", "EthernetServer.h " and "EthernetUDP.h") - uIP API reference: http://www.sics.se/~adam/uip/uip-1.0-refman/ - Arduino forums http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl - uIP homepage: http://www.sics.se/~adam/uip/index.php/Main_Page Licenses ------------- UIPEthernet.h UIPEthernet.cpp UIPServer.h UIPServer.cpp UIPClient.h UIPClient.cpp UIPUdp.h UIPUdp.cpp utility/mempool.h utility/mempool.cpp Copyright (c) 2013 Norbert Truchsess <[email protected]> All rights reserved. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. -------------- utility/enc28j60.h Author : Pascal Stang (c)2005 Modified by Norbert Truchsess Copyright: GPL V2 -------------- utility/Enc28J60Network.h utility/Enc28J60Network.cpp Copyright (c) 2013 Norbert Truchsess <[email protected]> All rights reserved. inspired and based on enc28j60.c file from the AVRlib library by Pascal Stang. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. -------------- utility/uip.c utility/uip_arp.h utility/uip_arp.c utility/uip_arch.h utility/uip.h utility/uipopt.h Copyright (c) 2001-2003, Adam Dunkels <[email protected]>, <[email protected]>. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the Institute nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -------------- uip-conf.h utility/uip-neighbor.h utility/uip-neighbor.c utility/uip_timer.h utility/uip_timer.c utility/uip_clock.h Author Adam Dunkels Adam Dunkels <[email protected]>, <[email protected]> Copyright (c) 2004,2006, Swedish Institute of Computer Science. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the Institute nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -------------- Dhcp.h Dhcp.cpp DHCP Library v0.3 - April 25, 2009 Author: Jordan Terrell - blog.jordanterrell.com - as included in Arduinos stock Ethernet-library, no special licence mentioned here -------------- Dns.h Dns.cpp (c) Copyright 2009-2010 MCQN Ltd. Released under Apache License, version 2.0 -------------- clock-arch.h clock-arch.c Copyright (c) 2010 Adam Nielsen <[email protected]> All rights reserved. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
perl-firmata
Perl implementation of the firmata client. Originally authored by Aki Mimoto (amimoto) this repository was transfered to Norbert Truchsess (ntruchsess) in 02/2013. Anybody willing to contribute is very wellcome! Please submitt pull-requests against branch 'dev'arduino-OneWire
OneWire lets you access 1-wire devices made by Maxim/Dallas, such as temperature sensors and ibutton secure memory. Library for arduinosend2car
Android App that allows sending locations shared by other apps to your BMW carpanstamp
panStamps are small wireless boards based on Atmega328p and CC1101 as RF-module. For details about panStamp see http://www.panstamp.com This repository contains a mirror of the panstamp library for arduino which is hostet at http://code.google.com/p/panstamp/ (original source source-location is http://panstamp.googlecode.com/svn/).perl-protothreads
a lightwight pseudo-threading framework for perl that is heavily inspired by Adam Dunkels protothreads for the c-languagefhem-mirror
Fhem is a GPL'd perl server for house automation. This is a mirror of the original repository on https://sourceforge.net/p/fhem/code/HEAD/tree/trunk/fhem/ that I use to track changes to my modules.Love Open Source and this site? Check out how you can help us