synology-docker

An Unofficial Script to Update or Restore Docker Engine and Docker Compose on Synology NAS

About • Built With • Prerequisites • Deployment • Usage • Contributing • Credits • Donate • License

About

Synology is a popular manufacturer of Network Attached Storage (NAS) devices. It provides a web-based user interface called Disk Station Manager (DSM). Synology also supports Docker on selected models. Docker is a lightweight virtualization application that gives you the ability to run containers directly on your NAS. The add-on package provided by Synology to install Docker is typically a version behind on the latest available version from Docker. Synology-Docker is a POSIX-compliant shell script to update both the Docker Engine and Docker Compose on your NAS to the latest version or a specified version.

Built With

The project uses Docker, a lightweight virtualization application.

Prerequisites

Synology-Docker runs on a Synology NAS with DSM 6 or DSM 7. The script has been tested with a DS918+ running DSM 6.2.4-25556 and DSM 7.0.1-42218. Other prerequisites are:

• SSH admin access is required - Synology-Docker runs as a shell script on the terminal. You can enable SSH access in DSM under Control Panel ➡ Terminal & SNMP ➡ Terminal.

• Docker is required - Synology-Docker updates the binaries of an existing Docker installation only. Install Docker on your NAS in DSM via Package Center ➡ All Packages ➡ Docker and ensure the status is Running.

• SynoCommunity/Git is required - Synology-Docker needs the Git package from SynoCommunity installed on your NAS. Install Git on your NAS by adding the SynoCommunity package repository (described here) and installing the Git package in DSM via Package Center ➡ Community ➡ Git.

Deployment

Deployment of Synology-Docker is a matter of cloning the GitHub repository. Login to your NAS terminal via SSH first. Assuming you are in the working folder of your choice, clone the repository files. Git automatically creates a new folder synology-docker and copies the files to this directory. Then change your current folder to simplify the execution of the shell script.

$ git clone https://github.com/markdumay/synology-docker.git
$ cd synology-docker

Usage

Synology-Docker requires sudo rights. Use the following command to invoke Synology-Docker from the command line.

$ sudo ./syno_docker_update.sh [OPTIONS] COMMAND

Commands

Synology-Docker supports the following commands.

Under the hood, the five different commands invoke a specific workflow or sequence of steps. The below table shows the workflows and the order of steps for each of the commands.

• A) Download Docker binary - Downloads an archive containing Docker Engine binaries from https://download.docker.com/linux/static/stable/x86_64/docker-${VERSION}.tgz. The binaries are compatible with the Intel x86 (64 bit) architecture. Unless a specific version is specified by the --docker flag, Synology-Docker pulls the latest stable version available.
• B) Download Compose binary - Downloads the Docker Compose binary from https://github.com/docker/compose/releases/download/${VERSION}/docker-compose-Linux-x86_64. Unless a specific version is specified by the --compose flag, Synology-Docker pulls the latest stable version available.
• C) Extract files from backup - Extracts the files from a backup archive specified by the --backup flag to the temp directory (/tmp/docker_update).
• D) Stop Docker daemon - Stops the Docker daemon by invoking synoservicectl --stop pkgctl-Docker.
• E) Backup current files - Creates a backup of the current Docker binaries, including Docker Compose. The configuration of the logging driver and Synology's start-stop-status script are included in the archive too. The files included refer to /var/packages/Docker/target/usr/bin/*, /var/packages/Docker/etc/dockerd.json, and /var/packages/Docker/scripts/start-stop-status.
• F) Extract downloaded binaries - Extracts the files from a downloaded archive to the temp directory (/tmp/docker_update).
• G) Restore Docker binaries - Restores the Docker binaries in /var/packages/Docker/target/usr/bin/* with the binaries extracted from a backup archive.
• H) Install Docker binaries - Installs downloaded and extracted Docker binaries (including Docker Compose) to the folder /var/packages/Docker/target/usr/bin/.
• I) Update log driver - Replaces Synology's log driver with a default log driver json-file to improve compatibility. The configuration is updated at /var/packages/Docker/etc/dockerd.json
• J) Restore log driver - Restores the log driver (/var/packages/Docker/etc/dockerd.json) from the configuration within a backup archive.
• K) Update Docker script - Updates Synology's start-stop-status script for Docker to enable IP forwarding. This ensures containers can be properly reached in bridge networking mode. The script is updated at the location /var/packages/Docker/scripts/start-stop-status.
• L) Restore Docker script - Restores the start-stop-status script (/var/packages/Docker/scripts/start-stop-status) from the file within a backup archive.
• M) Start Docker daemon - Starts the Docker daemon by invoking synoservicectl --start pkgctl-Docker.
• N) Clean temp folder - Removes files from the temp directory (/tmp/docker_update). The temporary files are created when extracting a downloaded archive or extracting a backup.

Options

Synology-Docker supports the following options.

Known Issues

This link contains an overview of known issues, including available workarounds.

Contributing

1. Clone the repository and create a new branch

   $ git checkout https://github.com/markdumay/synology-docker.git -b name_for_new_branch

2. Make and test the changes
3. Submit a Pull Request with a comprehensive description of the changes

Credits

Synology-Docker is inspired by this gist from Mikado8231.

Donate

License

Copyright © Mark Dumay