English | 简体中文 | 繁體中文 | 日本語 | Deutsch | 한국어
LibDriver WS2812B
WS2812B is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components.It internal include intelligent digital port data latch and signal reshaping amplification drive circuit.Also include a precision internal oscillator and a voltage programmable constant current control part, effectively ensuring the pixel point light color height consistent.The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After transmission for each pixel, the signal to reduce 24bit. pixel adopt auto reshaping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.RESET time>280μs , it won't cause wrong reset while interruption, it supports the lower frequency and inexpensive MCU.Refresh Frequency updates to 2KHz, Low Frame Frequency and No Flicker appear in HD Video Camera, it improve excellent display effect.LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angle is large,good consistency, low power, long life and other advantages. The control chip integrated in LED above becoming more simple circuit, small volume, convenient installation.
LibDriver WS2812B is the full function driver of ws2812b launched by LibDriver. WS2812B provides led writing and other functions. LibDriver complies with MISRA.
Table of Contents
Instruction
/src includes LibDriver WS2812B source files.
/interface includes LibDriver WS2812B SPI platform independent template.
/test includes LibDriver WS2812B driver test code and this code can test the chip necessary function simply.
/example includes LibDriver WS2812B sample code.
/doc includes LibDriver WS2812B offline document.
/datasheet includes WS2812B datasheet.
/project includes the common Linux and MCU development board sample code. All projects use the shell script to debug the driver and the detail instruction can be found in each project's README.md.
/misra includes the LibDriver MISRA code scanning results.
Install
Reference /interface SPI platform independent template and finish your platform SPI driver.
Add /src, /interface and /example to your project.
Usage
example write
#include "driver_ws2812b_basic.h"
uint8_t res;
uint32_t i;
static uint32_t gs_rgb[21];
static uint8_t gs_temp[1024];
/* init */
res = ws2812b_basic_init();
if (res != 0)
{
return 1;
}
/* write color */
for (i = 0; i < 21; i++)
{
gs_rgb[i] = color;
}
/* write data */
res = ws2812b_basic_write(gs_rgb, 21, gs_temp, 1024);
if (res != 0)
{
(void)ws2812b_basic_deinit();
return 1;
}
/* close the chip */
res = ws2812b_basic_deinit();
if (res != 0)
{
return 1;
}
else
{
return 0;
}Document
Online documents: https://www.libdriver.com/docs/ws2812b/index.html.
Offline documents: /doc/html/index.html.
Contributing
Please refer to CONTRIBUTING.md.
License
Copyright (c) 2015 - present LibDriver All rights reserved
The MIT License (MIT)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
Contact Us
Please sent an e-mail to [email protected].